GTD GTD-L1254P User Manual

LED PAR LIGHT

GTD-L1254P

User’s Manual

Guangzhou GTD Lighting Technology Co., Ltd.

Tel: [phone]

Fax: [phone]

http://www.gtd-lighting.com

GTD-L1254P User Manual

1

© 2017 GTD all rights reserved. Information, specifications, diagrams, images, and instructions herein are subject to
change without notice. GTD logo and identifying product names and numbers herein are trademarks of GTD. Copyright
protection claimed includes all forms and matters of copyrightable materials and information now allowed by statutory or
judicial law or hereinafter granted. Product names used in this document may be trademarks or registered trademarks of
their respective companies and are hereby acknowledged. All non-GTD brands and product names are trademarks or
registered trademarks of their respective companies.

GTD and all affiliated companies hereby disclaim any and all liabilities for property, equipment, building, and electrical
damages, injuries to any persons, and direct or indirect economic loss associated with the use or reliance of any
information contained within this document, and/or as a result of the improper, unsafe, insufficient and negligent
assembly, installation, rigging, and operation of this product.

Guangzhou GTD Lighting Technology Co., Ltd. | 27 Fu Yuan Yi Road, Guangzhou 510805, P.R.China

[phone] | [phone] fax | www.gtd-lighting.com | [e-mail]

GTD-L1254P User Manual

2

Contents

Safety instructions ...................................................................................................................................................................... 3

General guidelines ...................................................................................................................................................................... 4

Packing and shipping .................................................................................................................................................................. 5

Unpacking ....................................................................................................................................................................................... 5

Packing after use............................................................................................................................................................................. 5

Accessories ................................................................................................................................................................................. 5

Product introduction .................................................................................................................................................................. 6

Installation ................................................................................................................................................................................. 6

Clamps installation ......................................................................................................................................................................... 6

Device installation .......................................................................................................................................................................... 6

Power / Control connection ....................................................................................................................................................... 7

Power connection ........................................................................................................................................................................... 7

Control connection ......................................................................................................................................................................... 7

Testing ............................................................................................................................................................................................ 8

Control panel .............................................................................................................................................................................. 8

Menu structure .......................................................................................................................................................................... 9

DMX protocol ........................................................................................................................................................................... 10

Technical specification ............................................................................................................................................................. 12

Cleaning and maintenance ....................................................................................................................................................... 14

Troubleshooting ....................................................................................................................................................................... 15

System wiring diagram ............................................................................................................................................................. 16

Spare parts list ......................................................................................................................................................................... 16

Appendix 1 ............................................................................................................................................................................... 16

GTD-L1254P User Manual

3

Safety instructions

WARNING!

Before using the fixture, read the latest version of the product user manual, paying particular attention
to the safety instructions. Please check www.gtd-lighting.com for the latest revision/update of the user
manual. The manufacture of this fixture, are not responsible for damages, resulting from misuse of this
fixture, due to the disregard of the information printed in this user manual.

DANGER!

Hazardous voltage. Risk of lethal or severe electric shock.

WARNING!

Burn hazard. Hot surface. Do not touch.

WARNING!

Fire hazard.

It’s essential that the fixture is properly grounded. Only qualified personnel should perform electrical
connections.

WARNING!

Wear protective eyewear. Never look directly into the light source.

 Only qualified and certified personnel should perform installation of this fixture and only the original rigging parts

(brackets) included with this fixture should be used for installation.

 Before applying power to the fixture, check that the source voltage matches the fixture's requirement. Every fixture

must be earthed (grounded) and installed in accordance with local electricity regulations. Do not connect it to a
dimmer system.

 Never look directly into the light source of this fixture to prevent risk of injury to your retina, which may induce

blindness.

GTD-L1254P User Manual

4

General guidelines

 Never open this fixture while in use.
 The fixture should be kept clean. DO NOT operate the fixture in extreme heat or dusty environments. Avoid contact

with chemical liquid.

 IP rating: IP65. It should be kept away from the high ambient or dusty environments. Don’t let the fixture contact

with chemical liquids.

 Minimum distance to lighted objects must be 3.28feet (1m).
 Maximum temp of the external surface 158˚F (70˚C).
 Maximum ambient temperature 113˚F (45˚C).
 Minimum distance of inflammable materials from the surface 1.6 feet (0.5m).
 The light source of the fixture should be changed by the manufacture or its service agent or certified technicians.

WARNING! Risk of electric shock.

 The basic insulation should be kept between the controllable device and the power supply.
 Cover, lens or Menu Function Display with visible damages such as cracks or scratches must be replaced to ensure

performance of the fixture.

 Disconnect the fixture from power before changing any parts or accessories.
 Make sure that the installation area can hold a minimum point load of 10 times the weight of all installed fixtures,

clamps, cables, auxiliary equipment, etc. Check that the cover, clamps and locks are undamaged. Certified safety
cables must always be used when installing the fixture.

 The fixture is only intended for installation, operation and maintenance by qualified professional. Instructions

stated in the manual must be complied.

 The fixture must be kept in a well-ventilated place at least 50 cm away from any wall surface. Check if the fans or

ventilation openings are unblocked.

 Broken or damaged cables can only be fixed or changed by certified technicians, certified local distributors or the

manufacturer to ensure operational safety.

 Do not stick filters or other materials onto the lens. Do not modify the fixture or install other than GTD

manufactured parts.

 For questions regarding safety operation, please contact our technical personnel or call the service hotline +8620

61808296.

GTD-L1254P User Manual

5

Packing and shipping

Unpacking

Notes

All products are quality controlled and checked for any faults before they are dispatched to customers. If the fixture is
damaged during delivery, the customer must notify the shipper and manufacturer to file a damage insurance claim.
Photographic evidence of the damage must be provided.

Flight-Case

Open the cover of the flight-case and remove the plastic packing bags. Hold the handles of the fixture firmly and take it
out carefully.

Cardboard box

Open the box and take out the whole set of packaging foam which contains both the fixture and its accessories. Remove
the foam from the top, put away the accessories, and then take out the fixture wrapped in the plastic bag.

Packing after use

1. Switch off the fixture and wait for at least 5 minutes before disconnecting it from AC power. Cool down the fixture for

at least 15 minutes before packing.

2. Flight case: Wrap the fixture in plastic bags. Hold it by the handles, and then carefully place it inside the flight case

along with all the accessories. Close the cover. Do not upside down.
Cardboard box: Wrap the fixture in plastic bags. Put it in the packaging foam along with all the accessories. Place the
other set of packaging foam on top then carefully put it inside the cardboard box.

Accessories

Item

Qty

Unit

Notes

User Manual

1

pc

-

Clamps 1 set

Ø 42-52mm, Max. 200 kg

Power Cord [water-proof]

1

pc

0.5*2.5mm2 , IP67

Notes

Accessories are subject to change without any prior written notice.