GTCO ADB Features User Manual

ADB Features Station and UltraSlate Products

ADB unit powers up as a mouse and the driver switches to tablet mode when “talk r2” is
received (units released before 7/1/98 switch on” talk r1”). Inc run at 1000 lpi with

extended data enabled.

ADB Formats

The unit powers up as both a mouse and tablet. Only one of the two devices is active at
any one time. The mouse is the default. To change over to the tablet, you must issue a
(talk reg 1 pre July 98 firmware) and reg 2 (July 98 firmware) to address four or the current
tablet address.

ADDRESS 3 REG 0 MOUSE FORMAT

ADDRESS 4 REG 0 TABLET FORMAT

Pn = Pressure Bits
Tn = Tilt Bits
Bn = Button Bits (16 button)
BD = Buttons Down

Note at 1000 lpi.
Prox 1 = out 0 = in

100 = Unknown else reserved height data
when byte 5
0XXXXXX1
Tilt = 0XXXXXX0

Transducer Type 000 = Pressure Pen 001 =
Mouse 011 16 Button Cursor

PENS OR MOUSE 4 BUTTON CURSOR