G Star RF2500 User Manual
5.1CH Surrounding
RF Wireless Headphone
RF--
RF
2500
2500
I N S T R U C T I O N S
TV PC
Please read carefully all safety instructions before using this device
DVD
Gaming
Function Description
1
2
3
6
Transmitter (Tx set)
1. Power ON/OFF LED Indicator:
To indicate the power ON/OFF status. The LED will light
blue when power on.
2. Channel Button:
Used to select RF channel. There 8 channels to be
selected for superior transmitting.
When hearing noise or intermittent music from
headphone, you can push this channel button to select
another non-interfered channel automatically.
3. Power ON/OFF Button:
To turn on/off the transmitter.
4
5
7
4. Signal Selection Switch:
Switch up to connect the digital signals from optical
source. Switch down to connect the digital signals from
coaxial source.
5. S/PDIF Input Jack: (Optical)
To input S/PDIF signals from optical connection.
6. S/PDIF Input Jack: (Coaxial)
To input S/PDIF signals from coaxial connection.
7. DC 7V Input Jack:
To plug in the enclosed power adapter for DC 7V power
supply.
12
Receiver (Rx set)
8. Receiver Indicator:
The LED will light green to indicate the headphone
successfully received the RF signal from transmitter.
8
9
10
11
13
9. DC 7V Charge Input:
To plug in the DC 7V power adapter for charging the
built-in
10. Volume Control:
For volume up /down control.
11. Power ON/OFF Button:
To turn on/off the headphone power.
12. Mute Button
To mute the voice of the headphone.
13. Charge Indicator:
To indicate the status of built-in Li Polymer rechargeable
battery.
Red Light: The LED will light red when the battery is
charging.
Green Light: The LED will light green when the battery is
full.
Loading...