GST MP-400 User Manual
30310512 Issue 1.02
MP-400 MCU Mounting Board
Features
1 USB port
2 slots for main board（slot 1# and slot 2#）
2 LED ports
Description
Refer to GST-IFP4M Fire Alarm Control
Panel Installation (Document #30310301)
and Operation Manual (Document
#30310331)
Is Not hot-swappable MP-400 MCU
Mounting Board.
After installing MP-401 on the MP-400,
MP-400 is inserted onto MB-400. LED
corresponding on MP-400 is flashing to
mean that MP-401 is operating normally.
Connection and Wiring
MP-400 is inserted on the slot of mother
board on the MB-400.
Fig. 1 Installing MP-400 on MB-400
Installation
After installing MP-401 on the MP-400, MP-400
is inserted onto MB-400. Slot 1# and slot 2# can
be used for MP-401. Normally, as reserved
board, MP-401 on the slot 2# doesn’t work.
When only one MP-401 is used, slot 1# should
be selected.
Fig. 2
Application
MP-400 is the lining board of GST-IFP4M
Control Panel. All ports are connected with the
external devices through the lining board. LEDs
on the lining board indicate states of the main
board.
MP-400
MP-400
30310512 Issue 1.02
This Data Sheet is subject to change without notice. Please contact GST for more information or questions.
Gulf Security Technology Co., Ltd.
No. 80, Changjiang East Road, QETDZ, Qinhuangdao, Hebei, P. R. China 066004
Tel: +86 (0) 335 8502434 Fax: +86 (0) 335 8502532
service.gst@fs.utc.com www.gst.com.cn
Specification
Ambient
Temperature
0-49°C/32-120° F
Relative
Humidity
93% RH (non-condensing)
Electrical
Rating
5VDC, 24VDC 200mA
Trouble Shooting
Problems
Solutions
LED Not
Flashing
LED doesn’t flash if its board is
not installed on MP-400.
Please replace the main board
if LED doesn’t flash with its
board installed.
Limited Warranty
GST warrants that the product will be free from
defects in design, materials and workmanship
during the warranty period. This warranty shall
not apply to any product that is found to have
been improperly installed or used in any way not
in accordance with the instructions supplied with
the product. Anybody, including the agents,
distributors or employees, is not in the position to
amend the contents of this warranty. Please
contact your local distributor for products not
covered by this warranty.
Loading...