GS-Schleiftechnik N-14, N-1, N-18 Operating Instructions Manual

1

N14

N18

Knife grinding machine

N-1/14/18 01/2018

GS-Schleiftechnik, Am Kiebitzengraben 4, D-91315 Höchstadt

Telefon ++49(0)9193-5018696 Telefax ++49(0)9193-52018698

Operating instructions

2

Table of contents

A Safety

A.1 Dangers associated with the machine 4

A.2 Operation in accordance with intended use 4
A.3 Emissions 4
A.4 Sources of danger 4
A.5 The workplace 5
A.6 Authorised operators 5
A.7 Personal protective equipment 5
A.8 Machine safety measures on site 5
A.9 Behaviour in the event of an emergency 5
A.10 Safety information in this manual 5

B Setting up

B.1 Operating elements 6
B.2 Technical data 6
B.3 Installing and connecting the machine 7
B.4 Adjusting the grinding clearance guides 7
B.5 Replacing the grinding stones 7

C Operation

C.1 Grinding 7
C. Polishing and honing 7
CI.

D Cleaning and maintenance

D.1 Cleaning 8
D.2 Maintenance 8
D.3 Authorized cleaning agents 8
D.4 List of spare parts 9

Statement of warranty

This N-14/18 knife grinding machine carries a six month warranty from the date of delivery and is valid
for single-shift operation only. The warranty covers free replacement of damaged and defective parts.
Normal wear and tear, damage resulting from incorrect operation or negligence, and damage resulting
from improper use or unauthorised modifications are not covered by this warranty.,

3

Workplace

in front of the machine

Working position

standing

A. Safety

A.1 Dangers associated with the machine

The knife grinding machine is fitted with safety equipment, and has undergone a safety
examination and inspection. However, in the event of misuse or incorrect operation, the
operator, the machine and other assets of the owner may be endangered.

All personnel authorised to install, set up, operate and maintain the machine must read and
comply with the following instructions. Their safety is at stake.

A.2 Operation in accordance with intended use

The knife grinding machine is designed solely for grinding knives for the food industry.
Unauthorised modifications and alterations to the machine are not permitted for safety

reasons.
The manufacturer/retailer cannot be held liable for damage resulting from any operation which

is not in accordance with the intended use. In this event, the operator is solely responsible.
The N –14/18 knife grinding machine may be considered dangerous if:

- it is used by untrained personnel.

- it is used for a purpose other than that intended by the manufacturer.
Observation of the operating manual and the maintenance guidelines is also a prerequisite for

operation in accordance with the intended use.

A.3 Emissions

The A-assessed equivalent continuous sound pressure level of this machine is under 70
dB(A). No ear protection is necessary.

A.4 Sources of danger

Remove the mains plug before undertaking maintenance
or cleaning.

Never remove safety equipment or disable it by modifying
the machine.

Any alterations or repairs to the electrical system must
be carried out by a qualified electrician.

Only use original spare parts from GS-Schleiftechnik.

A.5 Workplace

4

Note:

Warning!

Danger!

Information regarding
economic operation of the
machine.

Instructions regarding the
prevention of damage or
accident.

Instructions regarding the
prevention of injury to
personnel or extensive
damage to property.

A.6 Authorised operators

Those responsible for the N-14/18 knife grinding machine must make the operating manual
available to the operator, and ensure that he/she has read and understood it.

Both the operator and his/her supervisor must ensure that only trained and authorised
personnel have access to the machine. The machine may only be operated by trained and
authorised personnel.

A.7 Personal protective equipment

No special protective equipment is required.

A.8 Machine safety measures on site

The N-14/18 knife grinding machine must be fixed to a flat, solid worktop. It is suited to working
in a humid environment. Ensure that the workplace is always kept clean and tidy by
appropriate instructions and inspections.

A.9 Behaviour in the event of an emergency

In the event of an emergency, remove the mains plug. If the machine's safety has been
compromised, shut it down immediately and inform the person or department responsible.

A.10 Safety information in this manual