GSS STC 160, HAV 470 Assembly Instructions Manual

Head-End Station STC 160

4 x AV Connection Panel

HAV 470

English

Notes on the Assembly Instructions.

As well as this supplementary Assembly
Instructions, the Assembly Instructions for the
STC

160

apply.

GSS
Grundig SAT Systems GmbH
Beuthener Strasse 43
D-90471 Nuremberg

Phone: +49 (0) 911 / 703 8877
Fax: +49 (0) 911 / 703 9210
E-mail: [e-mail]
Internet: http://www.gss.de/en

Contents

1 Safety regulations .......................................................................................3

2 General information ....................................................................................4

2.1 Scope of delivery ..........................................................................4

2.2 Meaning of the symbols used ..........................................................4

2.3 Technical data ...............................................................................4

2.4 Description ...................................................................................5

Connection variants .......................................................................5

4 x Cinch AV AV socket P1000 ............................................5

AV socket P1000 4 x Cinch AV ............................................5

Cinch AV + AV socket P2000 AV socket P1000 ......................5

Block diagram ...............................................................................6

3 Installation ..................................................................................................6

3.1 Installing the connection panel ........................................................7

3.2 Connecting the connection panel .....................................................8

Feed-in of external AV signals into quadruple modulators ..............8

Conversion of internal AV signals to ASI or LAN ...........................8

Combination of external and internal signals ...............................9

3.3 EMC regulations ..........................................................................10

4 Final procedures ........................................................................................11

- 2 - HAV 470

1 sa f e t y r e g u l a t i o n s

• The standards EN/DIN EN 50083 resp. IEC/EN/DIN EN 60728 must be
observed.

• Do not perform installation and service work during thunderstorms.

• Assembly, installation and servicing should be carried out by authorised
electricians.

• Switch off the operating voltage of the system before beginning with assem­bly or service work.

• Avoid short circuits!

• Observe the relevant standards, regulations and guidelines on the installa­tion and operation of antenna systems.

• To ensure electromagnetic compatibility, make sure all connections are tight
and the covers are screwed on securely.

• No liability is accepted for damage caused by faulty connections or inap­propriate handling of the device.

Check the head-end station according to the safety instructions listed in their

assembly instruction.

Take precautions to prevent static discharge when working on the device!

Electronic devices should never be disposed of in the household rubbish. In

accordance with directive 2002/96/EC of the European Parliament and the
European Council from January 27, 2003 which addresses old electronic and
electrical devices, such devices must be disposed of at a designated collection
facility. At the end of its service life, please take your device to one of these
public collection facilities for proper disposal.

- 3 - HAV 470

2 ge n e r a l i n f o r m a t i o n

2.1 sCo pe of d e livery

1 Connection Panel HAV 470
4 Triple Cinch cable
1 26 pin ribbon cable
1 Brief assembly instructions

2.2 meani ng of t h e sym b ols us e d

Important note

—> General note

• Performing works

2.3 teChniCal da ta

The devices meet the following EU directives:
2006/95/EC, 2004/108/EC
The product fulfils the guidelines and standards for CE labelling (page 12).

Unless otherwise noted all values are specified as "typical".

Audio Inputs:

Impedance: .................................................................................. 47 kΩ

Audio level: ...............................................................................0.5 V

Eingänge Video:

Impedance: ....................................................................................75 Ω

Video level:....................................................................................1 V

Anschlüsse:

CVBS video connectors (Cinch): ............................................................4

Audio connectors (Cinch): ...............................................................4 x 2

AV connectors (26-pin socket):................................................................2

rms

pp

- 4 - HAV 470