GS Instech EZDASS A32, EZDASD P23, EZDASS P30, EZDASD L23, EZDASD C23 User Manual

Version

0.1

Date

May 11, 2018

Page

1/ 42

Title

USER MANUAL

Prepared by

Reviewed by

Approved by

USER MANUAL

EZD-LICPA23

EZS-LICPA30

May 11, 2018

GS Instech Co., Ltd.

1

Version

0.1

Date

May 11, 2018

Page

2/ 42

Title

USER MANUAL

Prepared by

Reviewed by

Approved by

DATE

NAMES

DESCRIPTIONS

VERSION

REMARK

May 11, 2018

H.J.CHOI

Original Draft

0.1

[CHANGE RECORD]

2

Version

0.1

Date

May 11, 2018

Page

3/ 42

Title

USER MANUAL

Prepared by

Reviewed by

Approved by

CHAPTER’s INDEX

[TABLE OF CONTENTS]

1. GENERAL ............................................................................. 7

1.1. Purpose ............................................................................................. 7

1.2. Copyright ........................................................................................... 7

1.3. FCC Warning Statements .......................................................................... 8

2. INTRODUCTION .................................................................... 11

2.1. System Overview ................................................................................. 11

2.2. Main Features .................................................................................... 12

3. SYSTEM DESIGN FOR EZD-LICPA23 (DONOR UNIT) ............................... 13

3.1. Exterior View ...................................................................................... 13

3.2. Interior View ...................................................................................... 14

3.3. External Interface ................................................................................. 15

3.4. FCC Statement ..................................................................................... 16

4. SYSTEM DESIGN FOR EZS-LICPA30 (SERVICE UNIT) ............................... 17

4.1. Exterior View ..................................................................................... 17

4.2. Interior View ...................................................................................... 18

4.3. External Interface ................................................................................ 19

4.4. FCC Statement .................................................................................... 20

3

Version

0.1

Date

May 11, 2018

Page

4/ 42

Title

USER MANUAL

Prepared by

Reviewed by

Approved by

5. SYSTEM SPECIFICATION ............................................................ 21

5.1. RF Performance................................................................................... 21

5.2. Frequency Information ........................................................................... 23

5.2.1. 700MHz ..................................................................................................................................................................................................... 23

5.2.2. 800/850MHz ............................................................................................................................................................................................ 24

5.2.3. 1900MHz ................................................................................................................................................................................................... 25

5.2.4. 2100MHz ................................................................................................................................................................................................... 26

5.3. Configuration & Mechanical Specification ..................................................... 27

6. SYSTEM BLOCK CONFIGURATION ................................................. 28

6.1. Block Diagram .................................................................................... 28

7. GUI OVERVIEW ..................................................................... 30

7.1. Configuration the Laptop to Connect to the Repeater .......................................... 30

7.2. Login-In Screen .................................................................................... 31

7.3. Main Screen ...................................................................................... 32

7.4. RF Status .......................................................................................... 33

7.5. RF Configuration .................................................................................. 34

7.6. Band Selection .................................................................................... 35

8. SYSTEM INSTALLATION ............................................................ 36

8.1. Warnings and Hazards ............................................................................ 37

8.1.1. Electric Shock ........................................................................................................................................................................................... 37

8.1.2. Exposure to RF ......................................................................................................................................................................................... 37

8.2. Service Man Installation Guide ................................................................. 38

8.2.1. Wall Mount Installation ......................................................................................................................................................................... 38

4

Version

0.1

Date

May 11, 2018

Page

5/ 42

Title

USER MANUAL

Prepared by

Reviewed by

Approved by

FIGURE’s INDEX

TABLE’s INDEX

8.3. Cable Connection ................................................................................. 40

8.3.1. AC Power cable connection .................................................................................................................................................................. 40

8.3.2. Local Maintenance Connection ........................................................................................................................................................... 41

8.3.3. Grounding cable Connection ............................................................................................................................................................... 41

FIGURE 1.FCC/ UL CERTIFICATION STATEMENT ......................................................................................................................................................... 8

FIGURE 2.EZ-DAS APPLICATION CONFIGURATIONS ............................................................................................................................................... 11

FIGURE 3. EZD-LICPA23 EXTERIOR VIEW .................................................................................................................................................................. 13

FIGURE 4. EZD-LICPA23 INTERIOR VIEW .................................................................................................................................................................. 14

FIGURE 5. EZD-LICPA23 EXTERNAL INTERFACE ....................................................................................................................................................... 15

FIGURE 6. EZD-LICPA23 UNIT FCC STATEMENT ....................................................................................................................................................... 16

FIGURE 6. EZS-LICPA30 EXTERIOR VIEW ................................................................................................................................................................... 17

FIGURE 7. EZS-LICPA30 INTERIOR VIEW ................................................................................................................................................................... 18

FIGURE 9. EZS-LICPA30 EXTERNAL INTERFACE........................................................................................................................................................ 19

FIGURE 10. EZS-LICPA30 UNIT FCC STATEMENT ..................................................................................................................................................... 20

FIGURE 11. EZD-LICPA23 BLOCK DIAGRAM CONFIGURATION ............................................................................................................................ 28

FIGURE 12. EZS-LICPA30 BLOCK DIAGRAM CONFIGURATION ............................................................................................................................. 29

FIGURE 13. THE WAY TO FIX THE BRACKET ON THE POLE (NORMAL TYPE) .................................................................................................... 38

FIGURE 14. THE WAY TO FIX FIRMLY THE SYSTEM FOR POLE MOUNTING ...................................................................................................... 39

TABLE 1. EZD-LICPA23 UNIT CONFIGURATION ........................................................................................................................................................ 14

TABLE 2. EZD-LICPA23 EXTERNAL INTERFACE DESCRIPTION ............................................................................................................................... 15

TABLE 3. EZS-LICPA30 UNIT CONFIGURATION ......................................................................................................................................................... 18

TABLE 4. EZS-LICPA30 EXTERNAL INTERFACE DESCRIPTION ................................................................................................................................ 19

TABLE 5. EZ-DAS RF PERFORMANCE DESCRIPTION ............................................................................................................................................... 22

TABLE 6. EZ-DAS 700MHZ OPERATING FREQUENCY INFORMATION ................................................................................................................. 23

TABLE 7. EZ-DAS 800/850MHZ OPERATING FREQUENCY INFORMATION FOR CDMA .................................................................................. 24

TABLE 8. EZ-DAS 800/850MHZ OPERATING FREQUENCY INFORMATION FOR LTE ........................................................................................ 24

TABLE 9. EZ-DAS 1900MHZ OPERATING FREQUENCY INFORMATION FOR CDMA ......................................................................................... 25

TABLE 10. EZ-DAS 1900MHZ OPERATING FREQUENCY INFORMATION FOR LTE ............................................................................................ 25

5

Version

0.1

Date

May 11, 2018

Page

6/ 42

Title

USER MANUAL

Prepared by

Reviewed by

Approved by

TABLE 11. EZ-DAS 2100MHZ OPERATING FREQUENCY INFORMATION ............................................................................................................ 26

TABLE 12. EZ-DAS CONFIGURATION & MECHANICAL SPECIFICATION............................................................................................................... 27

TABLE 13. EZ-DAS INSTALLATION ACCESSORIES...................................................................................................................................................... 36

6

Version

0.1

Date

May 11, 2018

Page

7/ 42

Title

USER MANUAL

Prepared by

Reviewed by

Approved by

1. General

1.1. Purpose

This document introduces features, specifications, structures and operation guideline for

the EZD-LICPA23/ EZS-LICPA30.

1.2. Copyright

All text and image in this document are subject to the copyright of GS Instech Co., Ltd.

This document may not be reproduced, distributed, or modified without the written permission of

GS Instech Co., Ltd.

7

Version

0.1

Date

May 11, 2018

Page

8/ 42

Title

USER MANUAL

Prepared by

Reviewed by

Approved by

1.3. FCC Warning Statements

FCC Warning Statement for system is follows. Must attach the label under manufacturing.

Figure 1.FCC/ UL Certification Statement

8

Version

0.1

Date

May 11, 2018

Page

9/ 42

Title

USER MANUAL

Prepared by

Reviewed by

Approved by

FCC Part 15.105 statement (Class A)

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to

radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which

case the user will be required to correct the interference at his own expense.

FCC Part 15.21 statement

Any changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate this equipment.

 Home/ personal use are prohibited  Use of unauthorized antennas, cables, and/or coupling devices not conforming with ERP/EIRP

and/or indoor‐only restrictions is prohibited

9

Version

0.1

Date

May 11, 2018

Page

10/ 42

Title

USER MANUAL

Prepared by

Reviewed by

Approved by

Type

Model name(s)

HAAT (m)

Antenna again

SU

EZ-DASS-L37

11 337.60

3dBi

EZ-DASS-L30

25 313.42

3dBi

EZ-DASS-IC37

4 293.78

3dBi

EZ-DASS-IC30

9 534.59

3dBi

EZ-DASS-P37

2 749.43

7dBi

EZ-DASS-P30

6 135.58

7dBi

EZ-DASS-A39

5 725.41

7dBi

EZ-DASS-A32

13 003.80

7dBi

DU

EZ-DASD-L23

14 408.20

15dBi

EZ-DASD-IC23

5 360.99

15dBi

EZ-DASD-P23

3 799.80

18dBi

EZ-DASD-A23

10 151.20

18dBi

RF Radiation Exposure

This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

RF exposure will be addressed at time of installation and the use of higher gain antennas may require larger

separation distances.

Antenna installation

Antennas must be installed in accordance with FCC 27.50, 24.

The height of the antenna above average terrain (HAAT) must not exceed limit in the following table.

WARNING. THIS is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and QUALIFIED

INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC Licenses to operate this device.

Unauthorized use may result in significant forfeiture penalties, including penalties in excess of $100,000

for each continuing violation.

10

Version

0.1

Date

May 11, 2018

Page

11/ 42

Title

USER MANUAL

Prepared by

Reviewed by

Approved by

2. Introduction

2.1. System Overview

EZ-DAS is designed to improve coverage and capacity of Commercial Quad Band.

Either feeding Carrier BTS signal directly or receiving signal via antenna, it provides coverage

Building in RF shadow.

Figure 2.EZ-DAS Application Configurations

11

Version

0.1

Date

May 11, 2018

Page

12/ 42

Title

USER MANUAL

Prepared by

Reviewed by

Approved by

2.2. Main Features

● All-in One Donor Unit

- Compose several units such as Optic Transceiver, NMS, PSU, BDA, Cavity Filter etc.

- Convenient to install in Middle Size Building with proper cost of one set

● Support the BTS or Antenna Feeding Solution

- Either feeding Carrier BTS Signal directly or receiving signal via Antenna

- With built-in BDA(Bi-Directional Amplifier) function, it is possible to use under Antenna feeding

condition

● Choose the Filtering Methods accord to the operating condition

- For Neutral Host installations, able to support the Full Band Filtering

● Improving Service Quality under Multi-Carriers Area

- Up to 6 Non-Contiguous block and gain per block based on Downlink Input Topologies

- Dealing with Near-far & Uplink Noise Floor Rise

● Topologies

- 1:4 Branches between Donor Unit and Service Unit.

- 3 Daisy Chain is possible with Daisy Chain Optic Unit.

● Supporting Technologies

- CDMA, LTE

● Supporting Frequencies

- Commercial Quad band (700M, 800+850M, 1900M, 2100M)

● Supporting Output Power

- Composite 4W with EZ-DASS-LICPA 30 (1W per Band)

- Composite 20W with EZ-DASS-LICPA 37 (5W per Band)

● Functions

- Support AGC, ALC, AGA with LLA(Low Limit ALC), ASD

● FCC Part 22, 24,27,90 & Part 15B class A

12

Version

0.1

Date

May 11, 2018

Page

13/ 42

Title

USER MANUAL

Prepared by

Reviewed by

Approved by

3. System Design for EZD-LICPA23 (Donor Unit)

3.1. Exterior View

Figure 3. EZD-LICPA23 Exterior View

13

Version

0.1

Date

May 11, 2018

Page

14/ 42

Title

USER MANUAL

Prepared by

Reviewed by

Approved by

No

Name

Remark

1

EZ-DASD-IC23

800/850MHz RF Digital Filter Unit

2

EZ-DASD-P23

1900MHz RF Digital Filter Unit

3

EZ-DASD-L23

700MHz RF Digital Filter Unit

4

EZ-DASD-A23

2100MHz RF Digital Filter Unit

5

Cavity Filter

Quadplexer for 800/850M & 1900M/ 700M+2100M Band Combiner

6

Cavity Filter

Quadplexer for 700M & 2100M

7

PSU

AC Input Voltage: 110VAC~240VAC(60Hz)/ DC Output Voltage: +6V

8

DOU

Donor Optic Unit (4Port)

9

RCDU-5W

5Way RF Channel Distribute Unit

10

SNMP Board

Apply for Web-UI/ Communicate with Service Unit

3.2. Interior View

Figure 4. EZD-LICPA23 Interior View

Table 1. EZD-LICPA23 Unit Configuration

14

Version

0.1

Date

May 11, 2018

Page

15/ 42

Title

USER MANUAL

Prepared by

Reviewed by

Approved by

No

NAMES

DESCRIPTION

SPECIFICATION

1

ANT

Feeding Downlink Signal

/ Transmit Uplink Output

4.3-10 Din Connector

2

AC IN

AC Input Outlet

MS3102A 22-2

3

OPTIC0~3

Insert the optic cable to Service Unit

Metal Cable Gland

4

EDU RF DL

Receive a Downlink RF Signal from EDU (Wire only)

SMA(F)

5

EDU RF UL

Transmit a uplink RF Signal to EDU (Wire only)

SMA(F)

6

LAN

Communicate a data between MDU & EDU or Server

RJ-45

7

LED

System Total Alarm Indication

General Performance

8

Vent-Core

Maintain Humidity & Temp Inside

IP66

3.3. External Interface

Figure 5. EZD-LICPA23 External Interface

Table 2. EZD-LICPA23 External Interface Description

15

Version

0.1

Date

May 11, 2018

Page

16/ 42

Title

USER MANUAL

Prepared by

Reviewed by

Approved by

3.4. FCC Statement

Figure 6. EZD-LICPA23 UNIT FCC Statement

16

Version

0.1

Date

May 11, 2018

Page

17/ 42

Title

USER MANUAL

Prepared by

Reviewed by

Approved by

4. System Design for EZS-LICPA30 (Service Unit)

4.1. Exterior View

Figure 7. EZS-LICPA30 Exterior View

17

Version

0.1

Date

May 11, 2018

Page

18/ 42

Title

USER MANUAL

Prepared by

Reviewed by

Approved by

No

Name

Remark

1

EZ-DASS-IC30

800/850MHz RF Power Amp Unit

2

EZ-DASS-P30

1900MHz RF Power Amp Unit

3

EZ-DASS-L30

700MHz RF Power Amp Unit

4

EZ-DASS-A32

2100MHz RF Power Amp Unit

5

Cavity Filter

Quadplexer for 800/850M & 1900M/ 700M+2100M Band Combiner

6

Cavity Filter

Quadplexer for 700M & 2100M

7

PSU

AC Input Voltage: 110VAC~240VAC(60Hz)/ DC Output Voltage: +6V/ +29V

8

SOU

Service Optic Unit

9

RCDU-4W

4Way RF Channel Distribute Unit

10

NMS Board

Apply for GUI/ Communicate with Donor Unit

11

DCO

Daisy Chain Optic Unit/ For SU Cascade Application

4.2. Interior View

Figure 8. EZS-LICPA30 Interior View

Table 3. EZS-LICPA30 Unit Configuration

18

Version

0.1

Date

May 11, 2018

Page

19/ 42

Title

USER MANUAL

Prepared by

Reviewed by

Approved by

No

NAMES

DESCRIPTION

SPECIFICATION

1

ANT

Feeding Uplink Signal

/ Transmit Downlink Output

4.3-10 Din Connector

2

AC IN

AC Input Outlet

MS3102A 22-2

3

OPTIC0

Insert the optic cable to Donor Unit

Metal Cable Gland

4

OPTIC1

Insert the optic cable to Next SU for Daisy Chain

Metal Cable Gland

5

LED

System Total Alarm Indication

General Performance

6

Vent-Core

Maintain Humidity & Temp Inside

IP66

4.3. External Interface

Figure 9. EZS-LICPA30 External Interface

Table 4. EZS-LICPA30 External Interface Description

19

Version

0.1

Date

May 11, 2018

Page

20/ 42

Title

USER MANUAL

Prepared by

Reviewed by

Approved by

4.4. FCC Statement

Figure 10. EZS-LICPA30 UNIT FCC Statement

20

Version

0.1

Date

May 11, 2018

Page

21/ 42

Title

USER MANUAL

Prepared by

Reviewed by

Approved by

Parameter

Down Link

Up Link

Remark

Frequency Range

728MHz~756MHz

698MHz~716MHz/ 777MHz~787MHz

700MHz

862MHz~894MHz

817MHz~849MHz

800/850MHz

1930MHz~1995MHz

1850MHz~1915MHz

1900MHz

2110MHz~2180MHz

1710MHz~1755MHz

2100MHz

Input Range

-60dBm ~ -30dBm/ Total

-67dBm

Per Band

Output Power

+30dBm with EZS-LICPA30

+23dBm(0.2W)

With EZD-LICPA23

700M

+30dBm with EZS-LICPA30

800/850MHz

+30dBm with EZS-LICPA30

1900M

+32dBm with EZS-LICPA30

2100M

Channel Capacity

【CDMA】 15MHz max/ 1.25MHz Step

【LTE】 5M, 10M, 20M

Gain

Range

50dB ~ 90dB with EZS-LICPA30

ALC, AGC

Included

Adjust Step

1dB

Accuracy

±1dB

Ripple

4dB p-p

Roll off

> 50dBc @ Channel OBW ±1MHz

Rho

≥ 0.912 (Rho)

For CDMA

EVM

< 4% for 256QAM

< 4% for 64QAM

For LTE

5. System Specification

5.1. RF Performance

21

Version

0.1

Date

May 11, 2018

Page

22/ 42

Title

USER MANUAL

Prepared by

Reviewed by

Approved by

Parameter

Down Link

Up Link

Remark

Frequency Error

< 0.05ppm

System Delay

< 5us

Exclude Fiber

Optic Delay

Noise Figure

Less than 6dB @ Min & Max Gain

Only UL

VSWR

< 1.5 : 1

OB Unwanted

Emission

<-5.5dBm @50KHz ≤ ∆f < 5.05MHz (RBW: 100KHz)

For LTE

<-12.5dBm @5.05MHz ≤ ∆f < 10.05MHz (RBW: 100KHz)

<-13dBm @10.5MHz ≤ ∆f < 15MHz (RBW: 1MHz)

ACLR

> 45dBc @ ±5MHz, ±10MHz, ±20MHz, ±40MHz

For LTE

Spurious Emission

For CDMA

885 kHz

-45dBc with a 30KHz RBW

1.98 MHz P

out

> 33dBm; -55dBc with a 30KHz RBW

28dBm P

out

<33dBm; -22dBm with a 30KHz RBW

2.25 MHz

-13dBm with a 30KHz RBW

4.0 MHz

-13dBm / 1 kHz: 9 kHz < f < 150 kHz

ITU

category A

-13dBm / 10 kHz: 150 kHz < f < 30 MHz

-13dBm/100 kHz: 30 MHz < f < 1 GHz

-13dBm / 1 MHz: 1 GHz < f < 12.75 GHz

Table 5. EZ-DAS RF Performance Description

22

Version

0.1

Date

May 11, 2018

Page

23/ 42

Title

USER MANUAL

Prepared by

Reviewed by

Approved by

Block

Transmit frequency band (MHz)

Bandwidth

UL / DL

Uplink

Downlink

LTE 10M

698

716

728

746

18 (Lower C)

777

787

746

756

10 (Upper C)

5.2. Frequency Information

5.2.1. 700MHz

[LTE]

Table 6. EZ-DAS 700MHz Operating Frequency Information

23

Version

0.1

Date

May 11, 2018

Page

24/ 42

Title

USER MANUAL

Prepared by

Reviewed by

Approved by

Block

Transmit frequency band (MHz)

Bandwidth

UL / DL

Uplink

Downlink

A1

824

835

869

880

11

B1

835

845

880

890

10

A2

845

846.5

890

891.5

1.5

B2

846.5

849

891.5

894

2.5

Block

Transmit frequency band (MHz)

Bandwidth

UL / DL

Uplink

Downlink

LTE 5M

817

849

862

894

32

5.2.2. 800/850MHz

[CDMA]

[LTE]

Table 7. EZ-DAS 800/850MHz Operating Frequency Information for CDMA

Table 8. EZ-DAS 800/850MHz Operating Frequency Information for LTE

24

Version

0.1

Date

May 11, 2018

Page

25/ 42

Title

USER MANUAL

Prepared by

Reviewed by

Approved by

Block

Transmit frequency band (MHz)

Bandwidth

UL / DL

Uplink

Downlink

A

1850

1865

1930

1945

15

D

1865

1870

1945

1950

5

B

1870

1885

1950

1965

15

E

1885

1890

1965

1970

5

F

1890

1895

1970

1975

5

C

1895

1910

1975

1990

15

Block

Transmit frequency band (MHz)

Bandwidth

UL / DL

Uplink

Downlink

LTE 20M

1850

1915

1930

1995

65

5.2.3. 1900MHz

[CDMA]

[LTE]

Table 9. EZ-DAS 1900MHz Operating Frequency Information for CDMA

Table 10. EZ-DAS 1900MHz Operating Frequency Information for LTE

25

Version

0.1

Date

May 11, 2018

Page

26/ 42

Title

USER MANUAL

Prepared by

Reviewed by

Approved by

Block

Transmit frequency band (MHz)

Bandwidth

UL / DL

Downlink

Uplink

LTE 10M

2110

2180

1710

1755

45M/ 70M

5.2.4. 2100MHz

[LTE]

Table 11. EZ-DAS 2100MHz Operating Frequency Information

26

Version

0.1

Date

May 11, 2018

Page

27/ 42

Title

USER MANUAL

Prepared by

Reviewed by

Approved by

Parameter

Specification

Remark

Donor/ Service

Antenna Filter

QUADPLEXER+BAND COMBINER

One port In/Output

Power Supply

AC Input Voltage: 110VAC~240VAC(60Hz)

Free Voltage

DC Output Voltage: +6V

EZD-LICPA23

DC Output Voltage: +6V/ +29V

EZS-LICPA30

Operation Temperature

-10°C~+50°C (100%RH)

Storage Temperature

-10°C~+80°C (5~95%RH)

Connectors

Antenna: 4.3-10 DIN Female

EZD-LICPA23

EZS-LICPA30

AC: MS-3102A 22-2

Optic Connection: Metal Cable Gland

EDU Connection: SMA Female(RF)/ MS3102A18-8(DATA)

EZD-LICPA23

Cable

1/2" Plenum-Rated Air-Dielectric Coaxial Cable

Size

13.78" x 21.6" x 12.2" without Bracket

EZD-LICPA23

13.78" x 21.6" x 10.3" without Bracket

EZS-LICPA30

Weigh

Less than 42kg (92.5lb) without Bracket

EZD-LICPA23

Less than 40kg (88.1lb) without Bracket

EZS-LICPA30

Power Consumption

Less than 200W

EZD-LICPA23

Less than 250W

EZS-LICPA30

Environment

IP54

MTBF

100,000 hours or higher

Grounding

nonferrous metal and anchoring point on bottom side

For RF and power cabling

Mount Application

Wall Mount

5.3. Configuration & Mechanical Specification

Table 12. EZ-DAS Configuration & Mechanical Specification

27

Version

0.1

Date

May 11, 2018

Page

28/ 42

Title

USER MANUAL

Prepared by

Reviewed by

Approved by

6. System Block Configuration

6.1. Block Diagram

Figure 11. EZD-LICPA23 Block Diagram Configuration

The repeater improves service in the commercial Quad-Band.

User may select frequency band according to the site peculiarities.

After receiving a weak signal from Donor antenna or BTS directly, the EZD-LICPA23 sends downlink signal to EZS-

LICPA30 using DOU (Donor Optic Unit).

DOU supports the translation of RF signal to Optic signal for connecting EZS-LICPA30 through

the fiber optic cable. And then Uplink Signal that received from EZS-LICPA30 amplify,

is send to the Base station via Donor Antenna or is connected to BTS directly.

In other words, EZD-LICPA23 is only transmitting the Uplink Signal over the air.

28

Version

0.1

Date

May 11, 2018

Page

29/ 42

Title

USER MANUAL

Prepared by

Reviewed by

Approved by

Figure 12. EZS-LICPA30 Block Diagram Configuration

EZS-LICPA30 is operating very similar to the EZD-LICPA23

After receiving an Uplink Signal from service antenna, the EZ-DASD-LICPA30 sends Uplink signal to

EZD-LICPA23 using SOU (Service Optic Unit).

SOU supports the translation of RF signal to Optic signal for connecting EZD-LICPA23 through

the fiber optic cable. And then Down Signal that received from EZD-LICPA23 amplify,

is send to the Mobile station via Service Antenna.

In other words, EZD-LICPA23 is only transmitting the Uplink Signal over the air.

29

Version

0.1

Date

May 11, 2018

Page

30/ 42

Title

USER MANUAL

Prepared by

Reviewed by

Approved by

1. Go to Local Connection

2. Click on "Properties"

3. Highlight "Internet Protocol"

4. Click on "Properties"

5. Choose "Obtain DNS Server address automatically"

6. Clink OK

7. GUI Overview

• Provide all functions that can be performed at Service Unit will be available thru the Donor Unit.

• Support the GUI pages that will be addressable via UDP Interface.

7.1. Configuration the Laptop to Connect to the Repeater

• Connect an Ethernet crossover cable from the LAN port of the repeater’s bottom side to your laptop

30

Version

0.1

Date

May 11, 2018

Page

31/ 42

Title

USER MANUAL

Prepared by

Reviewed by

Approved by

7.2. Login-In Screen

• GUI Screen for Log-In

• Enter the IP Address "192.168.1.1" and Port into GUI Main Screen. And then Connect.

31

Version

0.1

Date

May 11, 2018

Page

32/ 42

Title

USER MANUAL

Prepared by

Reviewed by

Approved by

7.3. Main Screen

• GUI Screen for Main Menu

• Able to select system that user control, Configuration & Status monitoring

• Green means that the system is operating under normal condition.

• Red means that the system is operating under abnormal condition. In other words, system is likely non-working.

• Gray means that the system is not linked or communicated fail. But if it is not communicated between DU and

SU, Donor Unit is also changed Red.

32

Version

0.1

Date

May 11, 2018

Page

33/ 42

Title

USER MANUAL

Prepared by

Reviewed by

Approved by

7.4. RF Status

• GUI Screen for display Repeater’s RF Status

33

Version

0.1

Date

May 11, 2018

Page

34/ 42

Title

USER MANUAL

Prepared by

Reviewed by

Approved by

7.5. RF Configuration

• GUI Screen in order to change the RF values

• User may change the various RF values of the repeater on this page

• Changes will not take effect until you click "Apply" button

• This menu is where the installer will choose references for specific implementation

34

Version

0.1

Date

May 11, 2018

Page

35/ 42

Title

USER MANUAL

Prepared by

Reviewed by

Approved by

Write the Fc or EARFCN

7.6. Band Selection

• Repeater support the capacity of CDMA and LTE Technologies

• Ability to set the 6 Non-Contiguous channel

• Support the CDMA 15MHz max per 1.25 step and LTE 5MHz, 10MHz, 20MHz

• User can set the desired channel using the GUI

35

Version

0.1

Date

May 11, 2018

Page

36/ 42

Title

USER MANUAL

Prepared by

Reviewed by

Approved by

#

Contents

Picture

Q’ty

1

Mounting Bracket

1EA

2

AC Power Cable SJT 3/16 AWG, 6ft

1EA

3

Frame Ground Cable with Tubular Cable Lug, 6ft

1EA

4

Installation purchase set

EYE BOLT(M12)

1EA

M5x12mm WRENCH BOLT, SEMS

2EA

PH(+) M4x8mm ,SEMS

4EA

5

Mounting Screw set

LAG SCREW 3/8”x3”

2EA

HEX HEAD 3/8”x2”, SCM440

2EA

Φ10.5mm/Φ21mm PLAIN WASHER

2EA

Φ10.2mm/Φ18.4mm SPRING WASHER

2EA

6

Tubing Tube Sleeve Black

Φ30mm/L:150mm Adhesive Polyolefin

3:1 Heat Shrink

1EA

8. System Installation

• This chapter describes how to install the repeater and Cabling method

• The needed accessories and tools are list up as below

Table 13. EZ-DAS Installation Accessories

36

Version

0.1

Date

May 11, 2018

Page

37/ 42

Title

USER MANUAL

Prepared by

Reviewed by

Approved by

8.1. Warnings and Hazards

8.1.1. Electric Shock

• Opening the Repeater could result in electrical shock and may cause severe

injury

• Operating the Repeater with antennas in very close proximity facing each other

could lead to severe damage to the repeater

8.1.2. Exposure to RF

Working with the repeater while in operation, may expose the technician to

RF electromagnetic fields that exceed FCC Rules for human expose.

Visit the FCC Website at http://www.fcc.gov/oet/rfsafety to learn more about

The effects of exposure to RF electromagnetic fields

37

Version

0.1

Date

May 11, 2018

Page

38/ 42

Title

USER MANUAL

Prepared by

Reviewed by

Approved by

Protection gloves and goggles

Make sure that worker wears protection gloves and goggles to prevent damages from

debris while drilling holes in a Pole or Wall

LAG SCREW 3/8"x3"

Φ10.5mm/Φ21mm PLAIN WASHER

Φ10.2mm/Φ18.4mm SPRING WASHER

8.2. Service Man Installation Guide

8.2.1. Wall Mount Installation

The procedure for fixing the pole type system is as follows.

Service man is mounting the same way the EZD-LICPA23 and EZS-LICPA30.

1) To mount the system on the wall, first fix the bracket on the wanted position.

2) Hang the system to the hooking position at the top of the mounting bracket

3) Push the system to the hooking position at the bottom of the mounting bracket.

Figure 13. The way to fix the bracket on the pole (Normal type)

38

Version

0.1

Date

May 11, 2018

Page

39/ 42

Title

USER MANUAL

Prepared by

Reviewed by

Approved by

Cautions while drilling on the pole

Drilling thru-hole on a center of the pole

Cautions System leveling

Before fixing the system, Check the horizontal and vertical level using a spirit level

M5x12mm WRENCH BOLT, SEMS

4) Align the system with the fixing holes of the mounting bracket and fix them firmly

Figure 14. The way to fix firmly the System for Pole Mounting

39

Version

0.1

Date

May 11, 2018

Page

40/ 42

Title

USER MANUAL

Prepared by

Reviewed by

Approved by

Port Outlook

(System Side)

Port numbering

for MS

NAME

Description

MS-3102A-10SL-3P

A

AC_H

AC Hot

B

AC_N

AC Neutral

C

F.G

Frame Ground

A

8.3. Cable Connection

8.3.1. AC Power cable connection

• Repeater supports a free AC Input voltage from 110V to 240V

• Provided Power cable is single type, so it can be used flexibly

• The pin description of AC Port is below. User should connect exact polarity of AC

• The specification & Connection of AC Power Cable

- A: MS3106A-22-2

- Connect Port A for inserting AC Power

40

Version

0.1

Date

May 11, 2018

Page

41/ 42

Title

USER MANUAL

Prepared by

Reviewed by

Approved by

Frame Ground

8.3.2. Local Maintenance Connection

• Repeater Support a RJ-45 connector

8.3.3. Grounding cable Connection

• Frame(Earth) Wire size is AWG #6. The way to install the grounding cable is below

• The specification of ground terminal lug is like below (Refer to JOCT 0202-RL05)

41

Version

0.1

Date

May 11, 2018

Page

42/ 42

Title

USER MANUAL

Prepared by

Reviewed by

Approved by

42