GSI Group Starforce GS-501 SFVDH, Starforce GS-551 SFVDH Specifications

Starforce
Dome
GOLDEN STATE
INSTRUMENT CO.
CONVENTIONAL DNR
Live Pixel Correction
Our “Starforce 2” technology with Smart DNR technology prevents image ghosting and provides even greater low light performance, enabling the camera to see images in color at night with a minimum illumination of 0.00001 LUX, with no distance limitations. The new and improved Star Force 2.0 DSP gives the camera unbeatable sensitivity with amazing natural color reproduction in day or low light conditions. With an Ultra High 650 TVL of color resolution, this gives the camera superior image quality. The 3 axis mount makes this a very versatile camera that can be placed on ceilings or walls with very little effort. The Built-in Heater & Blower allow for optimal use outdoors in all weather conditions and all 4 seasons. Built in Unshielded Twisted Pair (UTP) allow for camera installation up to 1000 feet. Surface or Flush Mountable body for more versatility.
Features:
Built in Heater & Blower – great for year round use Built in UTP Balun – Install up to 1000 feet using
Unshielded Twisted Pair
Star Force 2.0 DSP (Digital Signal Processor) Ultra High 650 TVL Color Resolution 5-50mm or 2.8-12mm Varifocal Auto-Iris Lens
configurations available
Minimum Illumination 0.0001 LUX IP 66 Weather Rating
DWDR (Digital Wide Dynamic Range) Vandal Resistant Dome Wall or Eave/Soffit/Ceiling Versatile Mount Dual Voltage 24 VAC / 12 VDC OSD (On Screen Display) Menu Controls Turbo AGC (Automatic Gain Control) Video Test Jack GSI’s DPC (Dead Pixel Correction)
GS-501 SFVDH
2.8-12mm Varifocal Auto Iris Lens
GS-551 SFVDH
5-50mm Varifocal Auto Iris Lens Starforce 2 Weatherproof Dome Camera Built in Heater & Blower Fan
Built in UTP Balun 650 TVL Color Resolution
GSI DPC (Dead Pixel Correction)
Automatically corrects dead pixels
GSI SMART DNR
3002 Dow Ave, suite 228, Tustin, CA 92780 USA Website: www.goldenstateinst.com Sales: 800-227-2330 Tech Support: 714-730-6889 Email: gsi@goldenstateinst.com
Operating Instructions:
WARNING:
OSD Controls:
Remove
Cap
Cover
CENTER
: Enter OSD Menu/Select Option
SPECIFICATIONS
:
Signal System NTSC Image Sensor 1/3” SONY Super HAD II DSP (Digital Signal Processor Effective Pixels 768(H) x 494(V)
Starforce 2.0
Scanning System 525 Lines 2:1 Interlace Scanning Frequency (V) 59.94Hz Resolution Ultra High 650 TVL Infrared LEDs None Min. Illumination 0.00001 LUX Light Compensation BLC, DWDR, HME S/N Ratio More than 67dB Shutter Speed 1/60 ~ 1/1000,000 sec. Video Output 1.0 Vp-p (75Ω) Sync System Internal / Line Lock Voltage Dual Voltage 12VDC/24VAC Power Consumption 180mA (H/B Off), 280mA (H/B On) Dimensions Camera 2.8” Diameter 5.1” Length Dimensions with Mount 9.8” x 7” Weight 1.59 lbs. Operating Temperature -40°F to 122°F
underneath to adjust settings with OSD Controls
UP: Moves Cursor Up DOWN: Moves Cursor Down LEFT: Moves Cursor Left/ Change
selected item parameters RIGHT: Moves Cursor Right/ Change selected item parameters
Do Not Point Camera Directly into the sun.
Do Not cut video or power wires Observe Correct Voltage and Polarity
Failure to Observe Warnings May Void Warranty
LENS
DC for Auto Iris or Manual (DC Should Be Set)
BACKLIGHT
BLC (Back Light Compensation) DWDR (Digital Wide Dynamic Range) HME (Highlight Mask Exposure)- Mask Bright Headlights
AGC (AUTO GAIN CONTROL)
The higher the gain, the brighter the image
SENS-UP
When it is night or dark the camera automatically detects the light level and maintains a color picture at night
White Balance
Use White Balance to adjust the screen color ATW, MANUAL, AWC-SET
3D DNR (Digital Noise Reduction)
Smart 3D DNR automatically adjust DNR Levels during motion
DNR (Digital Noise Reduction)
Reduces the background noise in low luminance environments
D&N MODE (Day/Night)
Set to “COLOR” to Enable Starforce Mode Set to “AUTO” For Black and White at night
Loading...