Our “Starforce 2” technology with Smart DNR technology prevents
image ghosting and provides even greater low light performance,
enabling the camera to see images in color at night with a minimum
illumination of 0.00001 LUX, with no distance limitations. The new
and improved Star Force 2.0 DSP gives the camera unbeatable
sensitivity with amazing natural color reproduction in day or low light
conditions. With an Ultra High 650 TVL of color resolution, this gives
the camera superior image quality. The 3 axis mount makes this a
very versatile camera that can be placed on ceilings or walls with
very little effort. The Built-in Heater & Blower allow for optimal use
outdoors in all weather conditions and all 4 seasons. Built in
Unshielded Twisted Pair (UTP) allow for camera installation up to
1000 feet. Surface or Flush Mountable body for more versatility.
Features:
Built in Heater & Blower – great for year round use
Built in UTP Balun – Install up to 1000 feet using
Unshielded Twisted Pair
Star Force 2.0 DSP (Digital Signal Processor)
Ultra High 650 TVL Color Resolution
5-50mm or 2.8-12mm Varifocal Auto-Iris Lens
configurations available
Minimum Illumination 0.0001 LUX
IP 66 Weather Rating
DWDR (Digital Wide Dynamic Range)
Vandal Resistant Dome
Wall or Eave/Soffit/Ceiling Versatile Mount
Dual Voltage 24 VAC / 12 VDC
OSD (On Screen Display) Menu Controls
Turbo AGC (Automatic Gain Control)
Video Test Jack
GSI’s DPC (Dead Pixel Correction)
GS-501 SFVDH
2.8-12mm Varifocal Auto Iris Lens
GS-551 SFVDH
5-50mm Varifocal Auto Iris Lens
Starforce 2 Weatherproof Dome Camera
Built in Heater & Blower Fan
Built in UTP Balun
650 TVL Color Resolution
GSI DPC (Dead Pixel Correction)
Automatically corrects dead pixels
GSI SMART DNR
3002 Dow Ave, suite 228, Tustin, CA 92780 USA
Website: www.goldenstateinst.com
Sales: 800-227-2330
Tech Support: 714-730-6889
Email: gsi@goldenstateinst.com
: Enter OSD Menu/Select Option
Signal System NTSC
Image Sensor 1/3” SONY Super HAD II
DSP (Digital Signal Processor
Effective Pixels 768(H) x 494(V)
Starforce 2.0
Scanning System 525 Lines 2:1 Interlace
Scanning Frequency (V) 59.94Hz
Resolution Ultra High 650 TVL
Infrared LEDs None
Min. Illumination 0.00001 LUX
Light Compensation BLC, DWDR, HME
S/N Ratio More than 67dB
Shutter Speed 1/60 ~ 1/1000,000 sec.
Video Output 1.0 Vp-p (75Ω)
Sync System Internal / Line Lock
Voltage Dual Voltage 12VDC/24VAC
Power Consumption 180mA (H/B Off), 280mA (H/B On)
Dimensions Camera 2.8” Diameter 5.1” Length
Dimensions with Mount 9.8” x 7”
Weight 1.59 lbs.
Operating Temperature -40°F to 122°F
underneath to adjust settings with OSD
Controls
UP: Moves Cursor Up
DOWN: Moves Cursor Down
LEFT: Moves Cursor Left/ Change
selected item parameters
RIGHT: Moves Cursor Right/ Change
selected item parameters
Do Not Point Camera Directly into the sun.
Do Not cut video or power wires
Observe Correct Voltage and Polarity
Failure to Observe Warnings May Void Warranty
LENS
DC for Auto Iris or Manual (DC Should Be Set)
BACKLIGHT
BLC (Back Light Compensation)
DWDR (Digital Wide Dynamic Range)
HME (Highlight Mask Exposure)- Mask Bright Headlights
AGC (AUTO GAIN CONTROL)
The higher the gain, the brighter the image
SENS-UP
When it is night or dark the camera automatically detects
the light level and maintains a color picture at night
White Balance
Use White Balance to adjust the screen color
ATW, MANUAL, AWC-SET
3D DNR (Digital Noise Reduction)
Smart 3D DNR automatically adjust DNR Levels during
motion
DNR (Digital Noise Reduction)
Reduces the background noise in low luminance
environments
D&N MODE (Day/Night)
Set to “COLOR” to Enable Starforce Mode
Set to “AUTO” For Black and White at night