GSI Group PNEG-1499 Owner's Manual
Digital High / Low Thermostat
INSTALLATION AND OPERATION
PNEG-1499
PNEG-1499
Date: 2-1-06
PNEG-1499 High / Low Thermostat
1
CHECK LIST
_____
_____
_____
1. All wire connections
2.
Factory values programmed
_____
_____
_____
_____
_____
_____
_____
3.
a. Value 1 set to ( F )
b. Value 2 or “S1” set to ( 130 )
c. Value 3 or “DIF1” set to ( 5 )
d. Value 4 set to ( H1 )
e. Value 5 or “S2” set to ( 100 )
f. Value 6 or “DIF2” set to ( 5 )
g. Value 7 set to ( H2 )
All items included in packaging.
_____ 4. Safety Decal Installed on side of Thermostat
_____
_____
_____
5.
Aesthetic appearance
6.
Manual
7.
Vendor Instruction Sheet
Tester Signature___________________________________
Date_________________________
2
PNEG-1499 High / Low Thermostat
TABLE OF CONTENTS
Safety
Installation
.......................................................................................................
Safety Guidelines
Safety Decals
Roof Damage Warning and Disclaimer
...........................................................................
.................................................................................
..........................................
.................................................................................................
Thermostat Connection to Standard Heater Control
Thermostat Connection to Deluxe Heater Control
Programming Setpoint Values
Parts
Appendix
Warranty
.....................................................................................................
.................................................................................................
..................................................................................................
.................................................................
...................................
...............................
4
4
7
8
9
10
11
12
13
14
15
PNEG-1499 High / Low Thermostat
3
SAFETY
SAFETY GUIDELINES
This manual contains information that is important for you, the owner/operator, to know and under-
stand. This information relates to protecting
equipment problems
operating or working in the area of this equipment of these safety guidelines. To help you
recognize this information, we use the symbols that are defined below.
Please read the manual and pay attention to these sections. Failure to read this manual
and it’s safety instructions is a misuse of the equipment and may lead to serious injury or death.
. It is the responsibility of the owner/operator to inform anyone
This is the safety alert symbol. It is used to alert you
to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid pos-
sible injury or death.
personal safety
and
preventing
DANGER
if not avoided, will result in death or serious injury.
WARNING
not avoided, could result in death or serious injury.
CAUTION
not avoided, may result in minor or moderate injury.
CAUTION
potentially hazardous situation which, if not avoided, may result in
property damage.
indicates an imminently hazardous situation which,
indicates a potentially hazardous situation which, if
indicates a potentially hazardous situation which, if
used without the safety alert symbol indicates a
4
NOTE
should
indicates information about the equipment that you
pay special attention to.
PNEG-1499 High / Low Thermostat
FOLLOW SAFETY INSTRUCTIONS
Carefully read all safety messages in this
manual and safety signs on your equipment.
Keep signs in good condition. Replace missing
or damaged safety signs. Be sure new equipment components and repair parts include the
current safety signs. Replacement safety signs
are available from the manufacturer.
Learn how to operate the machine and how to
use controls properly. Do not let anyone operate
without instruction.
Keep your machinery in proper working condition. Unauthorized modifications to the machine
may impair the function and/or safety and affect
machine life.
If you do not understand any part of this manual
and need assistance, contact your dealer.
SAFETY
PRACTICE SAFE MAINTENANCE
Understand service procedures before doing
work. Keep area clean and dry.
Never lubricate, service, or adjust machine while
it is in operation. Keep hands, feet, and clothing
from rotating belt and idlers.
Keep all parts in good condition and properly
installed. Fix damage immediately. Replace
worn or broken parts. Remove any build up
grease, oil, or debris.
PREP
ARE FOR EMERGENCIES
Be prepared if fire starts.
Keep a first aid kit and fire extinguisher handy.
Keep emergency numbers for doctors, ambulance
service, hospital, and fire department near your
telephone.
PNEG-1499 High / Low Thermostat
5
Loading...