G-Shock GD-X6930E-9 User Manual
MA1306-EA
Ú
#!3)/#/-054%2#/,4$
Operation Guide 3420
About This Manual
x Depending on the model of your watch, display text
appears either as dark fi gures on a light background or
light fi gures on a dark background. All sample displays
in this manual are shown using dark fi gures on a light
background.
x Button operations are indicated using the letters shown
in the illustration.
x Each section of this manual provides you with the
information you need to perform operations in each
mode. Further details and technical information can be
found in the “Reference” section.
E
Procedure Lookup
The following is a handy reference list of all the operational procedures contained in
this manual.
To set the time and date .........................................................................................E-7
To toggle the Timekeeping Mode time between DST and Standard Time .........E-9
To toggle between 12-hour and 24-hour timekeeping .......................................E-10
To view the time for another city code ................................................................ E-11
To toggle a city code time
between Standard Time and Daylight Saving Time ........................................ E-12
To measure times with the stopwatch ................................................................. E-14
To use Auto-Start ..................................................................................................E-15
To confi gure the countdown timer ......................................................................E-19
To use the countdown timer ................................................................................. E-21
To set an alarm time .............................................................................................. E-24
To test the alarm .................................................................................................... E-26
E-2
General Guide
x Press C to change from mode to mode.
xIn any mode (except when a setting screen is on the display), press L to illuminate
the display.
Timekeeping Mode World Time Mode
Contents
General Guide .......................................................................................................... E-4
Timekeeping ............................................................................................................. E-6
World Time ............................................................................................................. E-11
Stopwatch .............................................................................................................. E-13
Countdown Timer .................................................................................................. E-16
Alarms .................................................................................................................... E-22
Illumination ............................................................................................................ E-29
Reference ............................................................................................................... E-33
Specifi cations ........................................................................................................ E-42
To turn an alarm on and off .................................................................................. E-27
To turn the Hourly Time Signal on and off .......................................................... E-28
To illuminate the display manually ...................................................................... E-29
To specify the illumination duration .................................................................... E-30
To enable and disable auto light switch operation ............................................E-32
To turn Flash Alert on and off ..............................................................................E-35
To turn the button operation tone on and off .....................................................E-36
Stopwatch Mode Countdown Timer Mode Alarm Mode
E-1
E-3
C C
E-4
Timekeeping
Month – Day
PM indicator
Day of week
Hour : Minutes
E-6
3. When the setting you want to change is fl ashing, use D and B to change it as
described below.
Screen To do this: Do this:
Reset the seconds to
Toggle between Daylight Saving Time
(
Specify your Home Time zone
Change the hour or minutes
Change the year
Change the month or day
x For details about time zones, see the “City Code Table” at the back of this
manual.
x See “Daylight Saving Time (DST)” on page E-9 for details about the DST setting.
x For information about Flash Alert, see “Flash Alert” (page E-35).
E-8
Use the Timekeeping Mode to set and view the current
time and date.
Read This Before You Set the Time and Date !
The times displayed in the Timekeeping Mode and World
Time Mode are linked. Because of this, make sure you
select a Home Time zone before you set the time and date.
Seconds
Press D.
) and Standard Time ( )
Press D.
Use D (eastward) and B (westward).
Use D (+) and B (–).
C C
C
To set the time and date
Home time zone
Seconds
C C
Flash Alert
4. Press A to exit the setting screen.
x The day of the week is displayed automatically in accordance with the date (year,
month, and day) settings.
Daylight Saving Time (DST)
Daylight Saving Time (summer time) advances the time setting by one hour from Standard
Time. Remember that not all countries or even local areas use Daylight Saving Time.
To toggle the Timekeeping Mode time between DST and Standard Time
DST indicator
1. In the Timekeeping Mode, hold down A until the
seconds start to fl ash, which indicates the setting
screen.
2. Press C to move the fl ashing in the sequence shown
below to select other settings.
C
C C C C
CC
DST
Day
1. In the Timekeeping Mode, hold down A until the
seconds start to fl ash, which indicates the setting
screen.
2. Press C to display the DST setting screen.
3. Press D to toggle between Daylight Saving Time
(
4. Press A to exit the setting screen.
x The DST indicator appears on the display to indicate that
Daylight Saving Time is turned on.
Home Time Zone
Month Year
displayed) and Standard Time ( displayed).
E-5
Hour
Minutes
E-7
E-9
Operation Guide 3420
To toggle between 12-hour and 24-hour timekeeping
In the Timekeeping Mode, press D to toggle between 12-hour timekeeping and
24-hour timekeeping.
xWith the 12-hour format, the P (PM) indicator appears to the left of the hour digits for
times in the range of noon to 11:59 p.m. and no indicator appears to the left of the
hour digits for times in the range of midnight to 11:59 a.m.
xWith the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
any indicator.
xThe 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
applied in all other modes.
xThe P indicator is not displayed when the current time is displayed in other modes.
E-10
To toggle a city code time between Standard Time and Daylight Saving Time
DST indicator
E-12
To measure times with the stopwatch
Elapsed Time
D D D D B
Start Stop Re-start Stop Clear
Split Time
D B
Start Split
Two Finishes
D B
Start Split
xThe time on the screen may not appear to stop immediately when you press a
button to stop timing or to perform a split operation. Despite this, the time recorded
by your button operation is accurate.
E-14
1. In the World Time Mode, use D (east) and B (west) to
display the city code (time zone) whose Standard Time/
Daylight Saving Time setting you want to change.
2. Hold down A for about one second to toggle Daylight
Saving Time (DST displayed) and Standard Time
(DST not displayed).
x The DST indicator is on the display whenever you display
a city code for which Daylight Saving Time is turned on.
x Note that the DST/Standard Time setting affects only
the currently displayed city code. Other city codes are
not affected.
B D
( displayed)
First runner
fi nishes. Display
time of fi rst runner.
Split release Stop Clear
D B
Stop
Second runner
fi nishes.
Split release
Display time of
second runner.
B
B
Clear
World Time
City code
Current time and date
in the zone of the
selected city code
World Time shows the current time in 48 cities (29 time
zones) around the world.
x All of the operations in this section are performed in
the World Time Mode, which you enter by pressing C
(page E-4).
To view the time for another city code
In the World Time Mode, press D to scroll eastwardly
through city codes.
In the World Time Mode, press B to scroll westwardly
through city codes.
x For full information about city codes, see the “City Code
Table” at the back of this manual.
x If the current time for a city is wrong, check your
Timekeeping Mode time and time zone settings and
make necessary changes.
E-11
Stopwatch
MinutesHours
Seconds
1/100 second
About Auto-Start
With Auto-Start, the watch performs a 5-second countdown, and stopwatch operation
starts automatically when the countdown reaches zero.
During the fi nal three seconds of the countdown, a beeper sounds with each second.
To use Auto-Start
The stopwatch lets you measure elapsed time, split times,
and two fi nishes. It also includes Auto-Start.
x The display range of the stopwatch is 23 hours,
59 minutes, 59.99 seconds.
x The stopwatch continues to run, restarting from zero after
it reaches its limit, until you stop it.
x The stopwatch measurement operation continues even if
you exit the Stopwatch Mode.
x Exiting the Stopwatch Mode while a split time is frozen
on the display clears the split time and returns to elapsed
time measurement.
x All of the operations in this section are performed in
the Stopwatch Mode, which you enter by pressing C
(page E-5).
E-13
1. While the stopwatch screen is showing all zeros in the
Stopwatch Mode, press B.
x This displays a 5-second countdown screen.
x To return to the all zeros screen, press B again.
2. Press D to start the countdown.
x When the countdown reaches zero, a tone sounds and a
stopwatch timing operation starts automatically.
x Pressing D while the Auto-Start countdown is in
progress immediately starts the stopwatch.
E-15
Countdown Timer
The countdown timer can be set within a range of one
minute to 24 hours. An alarm sounds when the countdown
reaches zero. The countdown timer also has an autorepeat feature and a progress beeper that signals the
progress of the countdown.
xAll of the operations in this section are performed in the
Countdown Timer Mode, which you enter by pressing
C (page E-5).
Confi guring the Countdown Timer
The following are the settings you should confi gure before
actually using the countdown timer.
Countdown start time; Auto-repeat on/off; Progress beeper
on/off
xSee “To confi gure the countdown timer” (page E-19) for
information about setting up the timer.
Minutes
Seconds
Hours
E-16
Countdown End Beeper
The countdown end beeper lets you know when the countdown reaches zero.
x When the progress beeper is turned off, the countdown end beeper sounds for
about 10 seconds, or until you press any button to stop it.
x When the progress beeper is turned on, the countdown end beeper sounds for
about one second.
Progress Beeper
When the progress beeper is turned on, the watch uses beeps to signal countdown
progress as described below.
x Starting from fi ve minutes before the end of the countdown, the watch emits four
short beeps at the top of each countdown minute.
x 30 seconds before the end of the countdown, the watch emits four short beeps.
x The watch emits a short beep for each of the last 10 seconds of the countdown.
x If the countdown start time is six minutes or greater, the watch emits a short beep
for each second of the fi nal 10 seconds before the fi ve-minute point is reached. Four
short beeps are emitted to signal when the fi ve-minute point is reached.
E-18
Auto-repeat
When auto-repeat is turned on, the countdown restarts automatically from the
countdown start time when it reaches zero. If left running, the countdown is repeated
a total of eight times, after which it stops automatically.
When auto-repeat is turned off, the countdown stops when it reaches zero and the
display shows the original countdown start time.
x Pressing D while an auto-repeat countdown is in progress pauses the current
countdown. You can resume the auto-repeat countdown by pressing D, or you can
press B to reset to the countdown time starting value.
Countdown Timer Beeper Operations
The watch beeps at various times during a countdown so you can keep informed
about the countdown status without looking at the display. The following describes the
types of beeper operations the watch performs during a countdown.
E-17
To confi gure the countdown timer
1. While the countdown start time is on the display in the
Countdown Timer Mode, hold down A until the current
countdown start time starts to fl ash, which indicates the
setting screen.
x If the countdown start time is not displayed, use the
procedure under “To use the countdown timer” (page
E-21) to display it.
2. Press C to move the fl ashing in the sequence shown
below to select other settings.
Hours
C
Progress Beeper Auto-repeat
C
C
Minutes
C
E-19
Loading...