G-Shock G-2500-1M User Manual

Module No. 2351

TO SET TIME

Pull the crown out. Set the hands by turning the crown in
either direction. Push the crown in on a time signal.

Crown

■ For watch with the elapsed time bezel

Rotate the elapsed time bezel to align the mark with the
minute hand.
After certain amount of time elapsed, read the graduation
on the elapsed time bezel which the minute hand points to.

Elapsed
time bezel

The elapsed time is indicated.

• Some water resistant models are equipped with a screw
lock crown.

• With such models, you must unscrew the crown in the
direction noted in the illustration to loosen it before you
can pull it out. Do not pull too forcibly on such crowns.

• Also note that such watches are not water resistant while
their crowns are loosened. Be sure to screw the crowns
back in as far as they will go after making any setting.