Page 1
FOR A GOOD
DIGITAL CORDLESS PHONE
SEEN / SEEN A
EN
Page 2
Seen – Seen A
1
SEEN - SEEN A
Overview
Introduction .................................................................................................. 4
Presentation of the telephone ...................................................................... 5
The base ......................................................................................................................................5
Handset keys ..............................................................................................................................6
Navigator ....................................................................................................................................6
Installing the phone ...................................................................................................................7
Handset display ..........................................................................................................................8
Status icons ................................................................................................................................8
Information field .........................................................................................................................8
Menu structure ............................................................................................. 9
Quick reference ..........................................................................................................................9
How to navigate among the menus ......................................................................................... 10
Call management ....................................................................................... 11
Make a call ................................................................................................................................ 11
Answering a call ....................................................................................................................... 11
Ending a call ............................................................................................................................. 11
Microphone mute function ....................................................................................................... 11
Checking your voice mailbox ................................................................................................... 12
Calling an abbreviated number ............................................................................................... 12
Inserting a pause (in dialling) .................................................................................................. 12
Two outside calls ...................................................................................................................... 12
Call log ....................................................................................................... 14
Calling Line Identification Presentation (CLIP) ...................................................................... 14
Received / Missed call log ....................................................................................................... 14
Dialled call log .......................................................................................................................... 15
Calling back a number in your call list .................................................................................... 15
Making an entry in the phonebook from the list of calls ........................................................ 15
Deleting caller list record ........................................................................................................ 15
Phonebook .................................................................................................. 16
Calling a contact from your phonebook .................................................................................. 16
Adding a contact to the phonebook ......................................................................................... 16
Display a contact ...................................................................................................................... 16
Editing a contact ....................................................................................................................... 16
Deleting a contact / The entire phonebook ............................................................................. 16
Directory capacity .................................................................................................................... 17
Assigning a shortcut ................................................................................................................ 17
Page 3
2
SEEN - SEEN A
Using the multi-handset capabilities .......................................................... 18
Intercom Call ........................................................................................................................... 18
Answering an internal call ...................................................................................................... 18
Managing an external and an internal call ............................................................................. 18
Customising the handset ............................................................................ 19
Select the ring tone (internal / external) ................................................................................ 19
Handset ringer level ................................................................................................................ 19
Activating / Deactivating the warning beeps .......................................................................... 19
Modifying the language ........................................................................................................... 19
Handset naming ....................................................................................................................... 19
Answer calls automatically ..................................................................................................... 19
Key lock .................................................................................................................................... 19
Setting the date and time............................................................................ 20
Setting the time ....................................................................................................................... 20
Setting the date ....................................................................................................................... 20
Hour format (12H/24H) ............................................................................................................ 20
Date format .............................................................................................................................. 20
Setting the alarm ..................................................................................................................... 20
Advanced settings ...................................................................................... 21
Association of other handsets with your base ....................................................................... 21
Restoring the handset / base Default Settings ...................................................................... 21
Deleting a handset ................................................................................................................... 21
Modifying the dialing mode ..................................................................................................... 21
Flash timing ............................................................................................................................. 21
Modifying Base master PIN code ............................................................................................ 22
Answering machine (Model Seen A only) .................................................... 23
Enabling / Disabling the answering machine ......................................................................... 23
Playing messages .................................................................................................................... 23
Delete all old messages .......................................................................................................... 24
Record a memo ........................................................................................................................ 24
Listening to a message while it is being recorded ................................................................. 24
Answering machine setup (Models Seen A only) ........................................ 25
Modify the answering machine mode ..................................................................................... 25
Modifying the outgoing message (OGM) ................................................................................. 25
Listening to your answer machine message .......................................................................... 25
Number of rings ...................................................................................................................... 26
Recording time of incoming messages .................................................................................. 26
Remote access control ............................................................................................................ 26
Modify the remote enquiry code ............................................................................................. 27
Message compression ............................................................................................................. 27
Answer machine memory capacity ......................................................................................... 28
Page 4
Seen – Seen A
3
SEEN - SEEN A
Batteries safety precautions ...................................................................... 29
General product care .................................................................................. 29
Changing the battery ................................................................................................................ 29
Troubleshooting ......................................................................................... 30
Troubleshooting ....................................................................................................................... 30
Page 5
4
SEEN - SEEN A
INTRODUCTION
Dear Customer,
You have just acquired a new generation Grundig telephone. Thank you for placing your confidence in
us.
This device has been manufactured with the utmost care. If you should have difficulties in operating
it, we recommend that you consult this manual.
You can also find information on the following site:
www.grundig-dect.com
For your comfort and safety, we urge you to carefully read the paragraph « Recommendations and
safety instructions » of the warranty card included in the pack.
The CE label confirms that the product complies with the 1999/5/EC regulations of
the European Union Parliament regarding wireless systems and
telecommunications.
The declaration of compliance may be looked up on the www.grundig-dect.com site
or can be obtained from the following address:
Sagemcom Documents SAS
250, route de l'Empereur
92848 Rueil-Malmaison Cedex - France
Page 6
Seen – Seen A
5
SEEN - SEEN A
PRESENTATION OF THE TELEPHONE
The base
1
2
3
4
1
Power socket
2
Telephone socket
3
Paging button
- Short press: find handset (Paging).
- Long press: handset pairing mode.
4
Indicator light
- Fixed: communication in progress /
Answer machine on.
- Flashing: base paring mode /
find handset (paging) /
new message(s) on your voicemail /
access to answer machine.
Page 7
6
SEEN - SEEN A
Handset keys
1
2
9
10
11
13
14
15
3
4
5
6
7
8
12
1
Earpiece
2 Screen
3 Access to main menu / Validation key
4 Pick-up / R key: manage multiple calls
5
Access to voice messaging service
(long press from home screen)
6
Activate / Deactivate keypad lock
(long press from home screen)
7 Activate / Deactivate handsfree mode
8 Handset charging contacts
9
BACK / Mute / INT Key :
- Cancel the action
- Return to previous menu
- Activate / Deactivate the microphone
(during a call)
- Call an additional handset
(from the home screen)
10
Hang up (during a call) /
Return to previous menu /
Switch handset on/off (press and hold)
11
Browsing through the menus /
Access to the call log (from home screen)
12
Answering machine control keys
(Model Seen A only)
13
Activate / Deactivate the silent mode
(long press from home screen)
14 Access phonebook
15 Microphone
Navigator
- From the Home screen: access to the caller list.
- On the menu: navigation key up.
- From the Home screen: access to outgoing call list (Bis).
- On the menu: navigation key down.
Page 8
Seen – Seen A
7
SEEN - SEEN A
Installing the phone
1. Connect the power adapter cord to the socket on the bottom of the base.
2. Connect the other end of the cable with the power wall socket.
3. Plug the phone cable into the socket of your base.
4. Connect the other end of the cable with the phone wall socket.
5. Insert the battery connector into the respective socket complying with its position.
6. Slide the battery pack into its housing.
7. Fit the rear part of the handset to the front part.
8. Place the handset in the base station to charge for 12 hours prior to first use.
400mAh 2.4 V
Ni-MH battery
400mAh 2.4 V
Ni-MH battery
400mAh 2.4 V
Ni-MH battery
Clack
5
6
7
8
400mAh 2.4 V
Ni-MH battery
400mAh 2.4 V
Ni-MH battery
400mAh 2.4 V
Ni-MH battery
Clack
2
1
3
4
12 H
IMPORTANT
If your handset battery is empty leave the handset in the charging unit for at least 4
minutes. You will then be able to switch it on again.
Page 9
8
SEEN - SEEN A
Handset display
123456789012
ABCDEFGHIJKL
Status icons
Status icons
Information field
Status icons
Flashes when the handset is out of
range or when the base is
disconnected from power.
Hands-free activated
External call
Charging status icon
Fixed: battery is full
Blinks: charging in progress
Fixed: battery is low
Missed call
Keypad locked
New voice messages
Alarm set
Silent mode activated
On: answering machine activated.
Blinks: new message(s) on your answering
machine.
Information field
ABC...
In standby:
the name and the number of the
handset
In the menu:
the name of the menu /
of the function
88..
In standby:
date and time
During a call:
- the caller's number
- the duration of the call
Page 10
Seen – Seen A
9
SEEN - SEEN A
MENU STRUCTURE
Quick reference
call list Hs settings Alarm
Options
Add to pb Ring setup
Delete Tone setup
Delete all language
category Rename hs
Auto answer
phonebook Date & time
Options
add DIRECT MEM.
View
edit
delete registration
Delete all
Pb status reset
Ans. Machine* Msg playback
Del all old
Bs settings Delete hs Memo
Dial mode Tam on/off
Flash time Tam settings
Change pin
* Model Seen A only
Page 11
10
SEEN - SEEN A
How to navigate among the menus
To navigate among the menus, use the keys:
, , ()and ().
Step 1: access a menu
- Press
.
Step 2: select a menu / a sub-menu
- Select "the desired menu" use the keys () or ().
- Confirm by pressing the key
.
Step 3: select a function
- Select "the desired function" use the keys () or ().
- Confirm by pressing the key
.
- Modify the parameter.
- Confirm by pressing the key
.
Example: how to use the menu to change your handset ring tone.
Go to the menu "Hs settings" "ring setup".
Step 1: access a menu
1. Press .
Step 2: select a menu
2. Select "hs settings" using the ()or () key.
3. Press
.
4. Select "ring setup" using the or key.
5. Press
.
6. Select "int. ring" (or "ext. ring ") using the or .
7. Press
.
Step 3: select a function
8. 10 melodies are available: "melody 1"… "melody 10".
Select the desired melody using the or key.
9. Press
key to confirm your selection.
Page 12
Seen – Seen A
11
SEEN - SEEN A
CALL MANAGEMENT
Make a call
Ensure that the handset is switched on.
Hands-free mode:
1. Press . The icons and appear and you will hear the dial tone.
2. Enter the phone number.
- OR -
1. Enter the phone number.
2. Press
. The icons and appear.
Normal mode:
1. Press . The icon is displayed.
2. Enter the phone number.
- OR -
1. Enter the phone number.
2. Press
.
During a phone call you can activate or deactivate the handset loudspeaker by
pressing the key .
Answering a call
When the phone rings, press the key to answer the call.
You can adjust the volume of your handset earpiece by pressing or key anytime
during a conversation.
Ending a call
To end a call press .
Microphone mute function
- Enable Mute function: press , "SECRECY ON" is displayed on the screen.
- Disable Mute function: press
, your conversation partner will be able to hear you again.
Page 13
12
SEEN - SEEN A
Checking your voice mailbox
If you have received a new voice mail message, the icon is displayed on the screen.
To use this feature you need to set up the voice mailbox, please refer to section
"Assigning a shortcut" on page 17.
1. Hold down the key
.
2. Follow the instructions.
3. Once you have consulted the messages, the icon
disappears.
Calling an abbreviated number
You can call the number you have assigned to one of the shortcut keys ( , or ).
Hold down the key on which the number was programmed
, or .
The number is automatically dialled.
To change the phone numbers assigned to keys , or , please refer to section
"Assigning a shortcut", page 17.
Inserting a pause (in dialling)
You can insert a pause in dialling a phone number if you want to wait before actually ringing.
While dialling the number you want to call, press and hold the key
to insert the pause.
The display shows a ’’P’’.
Two outside calls
Accepting a second call whilst being in another call
During a call, a beep is emitted by your operator to inform you that a second call is in the loop. On the
display the number of this second caller is indicated.
Press
then the key to accept the second call.
Your first contact is put on hold and you can talk with the second caller.
Making a second call whilst being in another call
During a conversation, press then dial the number to be called.
The first call is put on hold and you can talk to the second caller.
Page 14
Seen – Seen A
13
SEEN - SEEN A
Switching from one call to the other
To switch from one call to the other, press then the key .
The call in process is then put on hold and you can talk to the other call.
Ending one of the two calls
To end one call and continue with the other, press then the key .
The call in process is then ended finally and you can talk to the other call.
To set up a 3-way conference (2 caller and yourself)
During a conversation, press then the key .
You can then talk with the 2 contacts at the same time.
To end the 3-way conference, press the red key
.
Page 15
14
SEEN - SEEN A
CALL LOG
Calling Line Identification Presentation (CLIP)
This CLIP phone stores and displays CLIP information provided by your local telephone company.
If you have not subscribed to CLIP service or if the caller number is suppressed, the display shows
unknown.
Display of numbers not available:
- OUT OF AREA: you are not in same area as your contact.
- WITHHELD: your contact does not want his number to be displayed.
Received / Missed call log
The list contains the numbers of the last 20 calls received.
1. Press ()
. The most recent name or call number is displayed (depending on whether or not
your contact is stored in your phonebook).
2. Press the or key to go through the list.
If the number of this caller exceeds 11 digits and cannot be displayed on screen,
press to view the complete number.
Category setting
This function allows you to define the category of calls to be displayed in the call log list.
1. Press ()
.
2. Press the or key to go through the list. Press
.
3. Select "category". Press
.
4. Select "All Calls" or "Missed Calls". Press
.
Consulting a missed call
When call(s) have been missed, the message "X new calls" is displayed on the screen
(X is the number of missed calls).
1. Press
.
2. The most recent name or call number is displayed (depending on whether or not your contact is
stored in your phonebook).
3. Press the or key to go through the list. Press
.
Missed calls are indicated by the icon in the incoming call log.
Page 16
Seen – Seen A
15
SEEN - SEEN A
Dialled call log
The dialled call log presents the calls you made (max. 10 calls).
To consult the list:
1. Press briefly ()
.
2. The last dialled number is displayed.
Press the or key to consult the list of the last 10 numbers dialled.
Calling back a number in your call list
1. Press the () or () key.
2. Press the or key to go through the list.
3. Press
.
Making an entry in the phonebook from the list of calls
1. Press the () or () key.
2. Use or to select the desired caller number.
3. Press
key, then select "add to PB".
4. Enter the name of the entry. Press
.
5. Press
to validate the number.
6. Choose a ring tone for the contact to be created. Press
.
Deleting caller list record
1. Press the () or () key.
2. Press or key to select a call record.
3. Press
.
4. Select "delete" (or "delete all" to delete the entire Caller list).
5. Press
to confirm.
Page 17
16
SEEN - SEEN A
PHONEBOOK
You can store 100 phonebook entries (20 digits and 12 characters) in your phonebook.
Calling a contact from your phonebook
1. Press key to access to the contact list.
2. Press or to go through the list.
3. Once the contact to call is chosen, press
.
Adding a contact to the phonebook
1. Go to the menu "phonebook" "Add".
2. Enter the name of the entry. Press
.
3. Enter the number. Press
.
4. Choose a ring tone for the contact to be created. Press
.
Display a contact
1. Go to the menu "phonebook".
2. Choose the contact to be displayed with the or . Press
.
3. Select "view".
4. The number is displayed.
Use keys or to display the name and the ring tone assigned to that contact.
Editing a contact
1. Go to the menu "phonebook".
2. Select the entry you want to edit using or . Press
.
3. Select "edit".
4. You can now use the
key to delete the entire name or individual characters.
5. Enter the new name and press
key.
6. You can now use the
key to delete the entire number or individual digits
7. Enter the new number and press
key.
8. Choose a ring tone for the contact to be created. Press
.
Deleting a contact / The entire phonebook
1. Go to the menu "phonebook".
2. Select the entry you want to delete using or . Press
.
3. Select "delete" (or "delete all" to delete the entire phonebook list).
4. To confirm the deletion of the entry. Press
.
Page 18
Seen – Seen A
17
SEEN - SEEN A
Directory capacity
Your directory has a capacity of 100 contacts.
When the memory is full, the message "pb full" is displayed and you cannot add any new contact.
Assigning a shortcut
The voice mailbox should be assigned to the key.
1. Go to the menu "hs settings" "direct MEM." "key 1" or "key 2" or "key 3".
2. You can now use the
key to delete any assigned number (if necessary).
3. Enter the new number and press
key.
Page 19
18
SEEN - SEEN A
USING THE MULTI-HANDSET CAPABILITIES
These functions are used for handset management when two or more handsets are registered on the
same base.
Intercom Call
1. Make sure your handset is on standby mode.
2. Press the
key.
If your installation has two handsets:
The second handset is directly called, and "calling hs X" appears on the screen
(x is the number of the handset called).
If your telephone installation has more than two handsets:
1. Select the desired handset using or (or select “ALL” if you want to call all handsets).
2. Press
. The handset rings.
3. Accept the call from the called handset.
4. When you have finished your call, press
key.
Answering an internal call
1. "call fr hs" followed by the calling handset number is displayed on the screen.
2. Press
to accept the call.
Managing an external and an internal call
Transferring an external call to another handset registered on same base
1. During a call, press .
2. Select "intercom", press
. The incoming call is put on hold.
3. Enter the internal call number. When the user answers, you can announce the call.
4. Press
key to transfer the call.
If the called handset does not answer, press to take back the call.
Making conference calls (3-way conversation)
You can connect one external call to two handsets registered at the base station.
To set up a telephone conference from an external call:
1. During a call, press
.
2. Select "intercom", press
. The external user is put on hold.
3. Enter the internal call number. Wait until the internal user answers.
4. Press and hold
until you hear a confirmation tone to start a three-way conference.
"conference" is displayed on the handset screen.
Page 20
Seen – Seen A
19
SEEN - SEEN A
CUSTOMISING THE HANDSET
Select the ring tone (internal / external)
1. Go to the menu "hs settings" "ring setup" "ext. ring" (or "int. ring").
2. Select the ring tone of your choice using or . Press
.
Handset ringer level
1. Go to the menu "hs settings" "ring setup " "ring volume".
2. Use or to select the volume level then press
to confirm your selection.
Activating / Deactivating the warning beeps
1. Go to the menu "hs settings" "tone setup " "key tone" or "battery tone" or
"out of range".
2. Change the status using the keys o .
3. Press
.
Modifying the language
1. Go to the menu "hs settings" "language".
2. Use or to choose the desired language.
Press
key to confirm your selection.
Handset naming
The default name of the handset is "handset N" where N is the number of the registered handsets.
1. Go to the menu "hs settings" "rename hs".
2. Use the keypad to enter the new name (up to 10 characters).
3. Use
key to delete wrong input if necessary. Press .
Answer calls automatically
This function allows you to take a call by simply taking the handset off its base.
1. Go to the menu "hs settings" "auto answer ".
2. Change the status using the keys or .
3. Press
.
Key lock
1. Hold down the key until the handset beeps and the icon is displayed.
2. To unlock the keypad, hold down the key
until the handset beeps and the icon
disappears.
Page 21
20
SEEN - SEEN A
SETTING THE DATE AND TIME
Setting the time
1. Go to the menu "hs settings" "Date & time" "set time".
2. Current date is displayed.
- To keep the time, press
.
- To change it, enter the new time in the HH:MM (24 hours format).
3. Press
.
Setting the date
1. Go to the menu "hs settings" "Date & time" "set date".
2. A screen displays the current date.
-
To keep the date, press .
-
To change it, enter the new date in DD/MM/YY or MM/DD/YY format.
3. Press
.
If you make a mistake while entering data, use keys or .
Hour format (12H/24H)
1. Go to the menu "hs settings" "Date & time" "time format".
2. Change the status using the keys or .
3. Press
.
Date format
1. Go to the menu "hs settings" "Date & time" "date format".
2. Change the status using the keys or . Press
.
Setting the alarm
1. Go to the menu "hs settings" "alarm".
To deactivate the alarm, select "OFF".
To activate the alarm once, select "ON".
2. Press
.
3. Enter the time at which you would like the alarm clock to sound: "HH – mm ".
4. Press
. « Snooze » (repetition) is displayed on the screen. Press .
"ON": to activate alarm repetition every 5 minutes.
"OFF": to deactivate alarm repetition.
The icon
is displayed on the screen. Your alarm is now set.
Page 22
Seen – Seen A
21
SEEN - SEEN A
ADVANCED SETTINGS
Association of other handsets with your base
1. Press and hold the pairing button on the base for 5 seconds (If no handset has been detected
within a minute the pairing mode will stop and your base return to standby).
2. Go to the menu "registration".
3. Enter the 4 digit base master PIN code (default 0000). Press
.
4. The screen will display the number of the handset that has been paired with the base.
Restoring the handset / base Default Settings
1. Go to the menu "RESET".
2. Enter the base master PIN code (default 0000).
3. Press
. A screen displays a request to confirm.
4. Press
.
Deleting a handset
1. Go to the menu "Bs settings" "delete hs".
2. Enter the base master PIN code (default 0000). Press
.
3. Select the handset you want to delete using the or key then press
key.
Modifying the dialing mode
Most telephone systems use the tone dialling mode. You can, however, use the pulse dialling mode:
1. Go to the menu "Bs settings" "Dial mode".
2. Change the status using the keys or .
3. Press .
Flash timing
If you connect your telephone to a private automatic branch exchange or use it in a foreign country,
you may need to modify the flash duration in order to use your telephone correctly with regard to the
following functionalities: outgoing 2nd call, incoming 2nd call, conference call.
Contact your administrator, who will supply the appropriate time period, and proceed to the new
settings.
1. Go to the menu "Bs settings" "Flash time".
2. Select the appropriate time period, press .
Page 23
22
SEEN - SEEN A
SHORT
Spain, United Kingdom, Italy, Switzerland, Austria, Netherlands, Poland, Belgium,
Ireland, Hungary, Slovenia, Romania, Slovakia, Czech Republic and Sweden
MEDIUM
Germany, France, Greece, Portugal, Croatia, Serbia, Montenegro, Bosnia and
Macedonia
LONG Bulgaria
Modifying Base master PIN code
Your base station code (default setting 0000) is required to access certain security functions.
This must contain 4 digits.
1. Go to the menu "Bs settings" "change pin".
2. Enter your old code first, press
.
3. Enter your new PIN code.
Each time a digit is entered the «--» is replaced by a «*». Press
.
4. Enter the new base code again, using the keypad. Press
.
5. Press
key to confirm. You will hear a confirmation tone.
Carefully note your base station code. You will need it to change certain settings.
Page 24
Seen – Seen A
23
SEEN - SEEN A
ANSWERING MACHINE (MODEL SEEN A ONLY)
The answering machine function of your telephone has two operating modes:
- Basic answering machine: a message indicates that you are not available. Your caller cannot
leave any messages.
- Recording answering machine: a message tells your correspondents that they can leave you a
message.
Enabling / Disabling the answering machine
1. Go to the menu "ANS. MACHINE" "tam ON/OFF".
2. Select "on" or "off" using or to activate /deactivate your answering machine. Press
.
Each time you power on your base, the answering machine goes to its previous
state.
Playing messages
If you have received new messages, the indicator light on the base will flash and the icon flashes
on the handset.
1. Go to the menu "ANS. MACHINE" "msg playback ".
2. Press
to play the messages. New messages are read first.
3. Press
to access the various message options. The list of options is displayed on the screen:
- STOP: stop reading the messages.
- Next: play the following message.
- Previous: return to previous message.
- Delete: delete the current message.
4. Press the key
to quit the menu.
5. If there are no messages, the handset indicates " 00--00 00--00".
While playing you can use the handset keys:
Key Action Key Action
delete the current message
- start playback of the messages.
- stop playback of the messages.
- 1 press: return to beginning of
the message.
- 2 presses: return to previous
message.
play the following message
Page 25
24
SEEN - SEEN A
Delete all old messages
1. Go to the menu "ANS. MACHINE" "del all OLD".
2. Press
, the massage "confirm? " is displayed.
3. Press
to confirm the deletion of all old messages.
Record a memo
With this function you can leave a personal message on your answer machine. Until it has been
listened to, it will be considered as a new message by the answer machine.
1. Go to the menu "ANS. MACHINE" "memo".
2. Press
to record the memo.
The message "recording" is displayed. You can now record your memo.
3. Press
to stop the recording of the memo.
4. The massage "playing" is displayed and the memo you have just recorded is played.
Listening to a message while it is being recorded
While a caller is recording a message, "screening ?" is displayed on your handset screen.
Press the key
to listen to the message.
Page 26
Seen – Seen A
25
SEEN - SEEN A
ANSWERING MACHINE SETUP (MODELS SEEN A ONLY)
Modify the answering machine mode
1. Go to the menu "ANS. MACHINE" "tam settings" "ANSWER MODE".
2. Select "ANS & REC" or "Answer only" using the or key to activate or deactivate your
answering machine, press
. A confirmation beep is issued.
Modifying the outgoing message (OGM)
Recording a personal outgoing message
1. Go to the menu "ANS. MACHINE""tam settings" "Ogm settings" "ANS & REC" (or "ANSWER ONLY").
2. Select "RECORD Mess" using the or key, press
.
3. Record your message.
4. At the end of your message, press
.
A beep will confirm that your message is now being used.
If you make a mistake while recording the message, repeat the operations described above until you
are satisfied with your message.
The recording of a new message will automatically replace the previous message
.
The maximum recording duration for a message is 180 seconds.
The recording start and end beeps are not part of your message
.
Listening to your answer machine message
1. Go to the menu "ANS. MACHINE" "tam settings" "Ogm settings" "ANS & REC" (or "ANSWER ONLY").
2. Select "playback" using the or key, press
.
3. Your current answer machine message will be played. Your handset will automatically return to
the previous menu.
If you have not saved a personal message, the answering machine will automatically
use the pre-recorded message.
Page 27
26
SEEN - SEEN A
Number of rings
This parameter enables you to set the number of times your telephone rings before the answering
machine answers a call. The number of rings can be set between 2 and 8.
You can also select the "time saver" mode. The "time saver" mode automatically determines the
number of rings: If there are no new messages on the answering machine, the number of rings will
be 4, otherwise the number of rings will be 2.
1. Go to the menu "ANS. MACHINE" "tam settings" "answer delay".
2. In the list, select the desired number of rings (between 2 and 8) using the or key
or the
"time saver" mode, press .
Recording time of incoming messages
Define the maximum time a caller has to leave their message.
1. Go to the menu "ANS. MACHINE" "tam settings" "record time".
2. Choose the desired recording time (60 s, 120 s, 180 s or unlimited)
by using keys or , then press
.
Remote access control
This function allows you to check your voice messages and change your answer machine settings
even when you are not at home.
Activate / Deactivate remote access
1. Go to the menu "ANS. MACHINE" "tam settings" "remote acc.".
2. Use or to select "on" or "off" setting.
3. Press
key to confirm your selection. You will hear a confirmation tone.
By default, the remote enquiry function is activated. You should modify the remote
enquiry code (0000 by default).
It can be modified from the "ANS. MACHINE" "tam settings" "change pin" menu
(refer to the paragraph “Modify the remote enquiry code” page 27).
Remote access control
To remotely access your answering machine: dial your telephone number and wait for the answering
machine to come on. When your outgoing message is played, press
and enter your remote access
code (0000 by default).
If no key is pressed for 5 seconds, the answer machine will stop automatically.
Page 28
Seen – Seen A
27
SEEN - SEEN A
A beep will indicate access to the answering machine. You can carry out the following operations:
Key Action Key Action
4
- 1 press: return to beginning of the
message.
- 2 presses: return to previous message.
2 Delete the current message.
5
Start playback of the messages.
9
Switch OFF the answering machine.
6 Go to the next message. 7
Activate the answer machine.
8
Stop playing the messages.
Modify the remote enquiry code
With the enquiry code you can make remote access to your answer machine messages secure from
another telephone.
By default, the remote enquiry function is activated. You should modify the remote
enquiry code (0000 by default).
1. Go to the menu "ANS. MACHINE" "tam settings" "change pin".
2. Enter the remote enquiry code (0000 by default) using the keys on the keypad. Press
.
3. Enter the new remote enquiry code, press
.
4. Enter the new remote enquiry code a second time, press
to confirm deletion.
A confirmation beep is issued.
Message compression
With this function, you can choose the compression level of messages recorded by your answer
machine.
- A low compression level will reduce the answer machine capacity but will give better sound
quality to recorded messages.
- A high compression level will increase the answer machine capacity but will give a poorer sound
quality to recorded messages.
1. Go to the menu "ANS. MACHINE" "tam settings" "compression".
2. Choose the desired compression level ("high", "Mid" or "Low") using keys
or .
3. Press
key to confirm your selection. You will hear a confirmation tone.
Page 29
28
SEEN - SEEN A
Answer machine memory capacity
Compression Capacity Recording quality
High
16 min Standard quality
MId
14 min Medium quality
Low
7 min High quality
When your answering machine reaches its maximum recording capacity, the
answering machine switches to Answer only mode automatically.
When your answer machine reaches its maximum recording capacity, you cannot receive any new
messages. The handset displays "tam full".
Page 30
Seen – Seen A
29
SEEN - SEEN A
BATTERIES SAFETY PRECAUTIONS
To avoid any risk of explosion:
Make sure you have inserted the batteries correctly.
Use only with 2.4 V 400mAh type or equivalent rechargeable battery.
Do not dispose of the battery in a fire. The cell may explode.
Check with local code for possible special disposal instructions.
Do not burn, disassemble, mutilate or puncture. Like other battery of this type, toxic materials
could be released which can cause injury.
To reduce the risk of fire or personal injury, use only the battery listed in the user’s guide.
Keep battery out of the reach of children.
Remove battery if storing over 30 days.
GENERAL PRODUCT CARE
To keep your telephone working and looking good, follow these guidelines:
Avoid putting the phone near heating appliances and devices that generate electrical noise (for
example, motors or fluorescent lamps).
DO NOT expose to direct sunlight or moisture.
Avoid dropping and other rough treatment to the phone.
Clean with a soft cloth.
Never use a strong cleaning agent or abrasive powder because this will damage the finish.
Retain the original packaging in case you need to ship the phone at a later date.
Changing the battery
Make sure the telephone is OFF before you replace battery.
1. Remove the battery compartment door.
2. Remove old battery.
3. Insert the new battery.
4. Put the battery compartment door back on.
5. Place handset in the base to charge.
Page 31
30
SEEN - SEEN A
TROUBLESHOOTING
Causes of poor reception:
Aluminium siding.
Foil backing on insulation.
Heating ducts and other metal construction can shield radio signals.
You are too close to appliances such as microwaves, stoves, computers, etc.
Atmospheric conditions, such as strong storms.
Base installed in the basement or lower floor of the house.
Handset battery is low.
You are out of range of the base.
Troubleshooting
Problem Solution
No display
Make sure the battery is properly installed and connected.
Place the handset on the charger and fully charge the battery (at least 15 hours).
Handset does
not ring
Make sure the RINGER setting on the handset is programmed to ON.
You may have added too many handsets to your phone line. Try disconnecting
some of your phones and try again.
Not possible
to make a call
despite dial
tone
Check that your handset is within range and move close to the base unit
(approximately 50 meters indoors and up to 300 meters in open space).
Check if the base unit is plugged into a wall socket that is shared with other
household appliances. Unplug other device and try again.
Page 32
http://www.grundig-dect.com
253645957 A-05/2015
Loading...