Grundig GCT-K2326V User Guide

Owner's Manual

HD Video Cameras

EN

GCT-K2326V 2 Megapixel Full HD-TVI V-Fixed Dome Camera IR 28

GCT-K2326V.166.1.26.06.2015

© ASP AG

LED WDR

Content:

1. Important Safety Instructions
1

2. Package Contents

nstallation

3. I

1. Zoom & Focus Adjustment 3

2. 3-Axis Gimbal Adjustment 3

4. Part Names

5. Control Stick

6. OSD Menu

1. LENS 6

2. EXPOSURE 6

3. WHITE BAL (White Balance) 7

4. BACKLIGHT 7

5. DNR (Digital Noise Reduction) 8

6. DAY/NIGHT 9

7. IMAGE 10

8. MOTION 12

9. SYSTEM 12

10. EXIT 13

1. Important Safety Instructions

Be sure to use only the standard adapter that is specified in the specification sheet.
Using any other adapter could cause fire, electrical shock, or damage to the product.
Incorrectly connecting the power supply may cause explosion, fire, electric shock, or
damage to the product. Do not connect multiple products to one single adapter.
Exceeding the capacity may cause abnormal heat generation or fire.

Do not place conductive objects (e.g. screwdrivers, coins or any metal items) or
containers filled with water on top of the product. Doing so may cause personal injury
due to fire, electric shock, or falling objects.

2

2

4

5

5

English

1

If any unusual smells or smoke comes out of the unit, stop using the product. In this
case, immediately disconnect the power source and contact the service center.
Continued use in such a condition may cause fire or electric shock.

If this product fails to operate normally, contact the nearest service center. Never
disassemble or modify this product in any way. (GRUNDIG is not liable for problems
caused by unauthorised modifications or attempted repair.)

To prevent fire or electric shock, do not expose the inside of this device to rain or
moisture.

2. Package Contents

These parts are included:

3. Installation

Do not install this product in a location subject to high temperature (over 55°C), low
temperature (below -25°C), or high humidity. Doing so may cause fire or electric shock.
Keep out of direct sunlight and heat radiation sources. This may cause fire.

Do not install the unit in humid, dusty or sooty locations. Doing so may cause fire or
electric shock. Install it in a place with good ventilation.

When installing the unit, fasten it securely and firmly. A falling unit may cause personal
injury.

If you want to relocate the already installed product, be sure to turn the power off and
then move or reinstall it.

2

English

3.1. Zoom & Focus Adjustment

3.2. 3-Axis Gimbal Adjustment

3English

4. Part Names

4 English