Grundig GCL2900E User Manual
ǵ
DEUTSCH
ENGLISH
FRANÇAIS
COLOR TELEVISION
DAVIO 55
ST 55-854/8 Dolby
;
22
CONTENTS
________________________________________________________________________
3 Installation and safety
4 Connection and preparation
The front of the TV set
Connecting aerial and mains cable
Putting batteries into the remote control
5 At a glance
The remote control
6 Settings
Setting TV channels – automatically (with ATS searching)
Picture settings
Sound settings
10 Television mode
11 Teletext mode
TOP or FLOF text mode
Normal text mode
Additional functions
Selecting functions – from the symbol bar
14 Convenience functions
... in the »SPECIAL FUNCTIONS« menu
Setting switch-off time with the »SLEEP TIMER« menu
15 Child-proof lock
16 Operating with external appliances
Decoder or satellite receiver
Video recorder or SET-TOP box
Camcorder
Headphones
19 Special settings
Limiting channel selection
Set TV channels
Manually adjusting colour standards
21 Information
Technical data
Service notes for the authorised dealer
EURO-AV (Scart) socket contact assignment
Customer information
Rectifying malfunctions
ENGLISH
3
INSTALLATION AND SAFETY
_________________________
Please observe the following notes when setting up and connecting the TV set:
This set has been designed for the reception and reproduction of picture and
sound signals.
Any other use is explicitly forbidden.
The ideal viewing distance from the screen is 5 times the diagonal width of the
screen.
External light shining on the screen adversely affects picture quality.
Assure that there is enough space inside the cabinet.
The TV set is designated for operation in dry rooms. Should you nevertheless
operate it outside, make absolutely sure that it is protected against dampness
(rain, water splashes). Never expose the TV set to moisture of any sort.
Do not place vessels filled with fluid (vases or similar) on the TV set. The vessel
may tip over and the fluid may cause an electrical hazard.
Put the TV set on an even and hard surface. Do not place objects (for example,
newspapers) on the TV set and do not place the set on a mat or similar object.
Do not place the TV set close to the heating or in direct sunlight, as it could
overheat.
Heat buildup can be dangerous and is detrimental to the service life of the
equipment. From time to time, have a technician come to clean the inside of the set.
Keep the TV set away from magnetic fields (for example, stereo speakers).
Do not open the TV set under any circumstance. The manufacturer accepts no
liability for damage resulting from unauthorised tampering.
Make sure that the mains cable does not become damaged.
The TV set may only be operated using the mains cable supplied.
Electrical storms represent a danger for every type of electrical device. Even if
the set is switched off, it could be damaged by a lightning strike hitting the
mains and/or the aerial lead. Therefore, always disconnect the mains plug and
aerial plug when there is an electrical storm.
When cleaning the screen, use only a soft, damp cloth. Use clean water only.
10
cm
10
cm
20
cm
20 cm
Krieg am Golf
! SERVICE !! SERVICE !! SERVICE !
4
CONNECTION AND PREPARATION
_______
The front of the TV set
IO
Switches the TV set on/off
–
z + Volume
–
P +
Channel selection
Switches the TV set to standby mode (»P+« only)
Yellow socket Video input for camcorder
White and red Audio input for camcorder
sockets
y Headphone connection (3.5 mm ø jack)
Connecting aerial and mains cable
1 Insert the aerial cable of the house aerial into aerial socket »É« on the
TV set.
2 Insert the mains cable supplied into socket »
~
« on the TV set.
3 Insert the mains cable plug into the mains socket.
Putting batteries into the remote control
1 Open the battery compartment by pulling off the cover.
2 Insert batteries (UM-3 or AA, 2 x1.5 V).
Observe the polarity when inserting the batteries (marked on base of battery
compartment).
Note:
When a battery is dead, the indication »Battery« appears.
If your television does not react to the remote control commands correctly,
then the batteries could be dead. Always remove empty batteries. There is no
liability for damage caused by leaking batteries.
Environmental note:
The batteries – even those free of heavy metals – cannot be disposed of in
normal household rubbish. Used batteries must be disposed of in used
battery collection containers in businesses or be taken to public waste
disposal facilities.
TV R
L AUDIO IN R
VIDEO IN
P
y
L AUDIO IN R
VIDEO IN
P
y
AV1
ENGLISH
5
AT A GLANCE
________________________________________________________________
The remote control
Ǽ Switches off the TV set (standby).
1…9 Switches the TV set on from standby mode;
AV 0 selects channels and AV channel positions directly.
i Calls up the »DIALOG CENTER« (with »i « and »OK«);
selects previous menu page.
ĭ
Sound on/off (mute).
,. Switches the TV set on from standby mode (»,« only);
selects channels step by step;
moves the cursor up/down.
FE
Changes the volume;
moves the cursor to the left/right.
OK Changes and activates various functions;
calls up the channel selection list.
AUX Selection button for various functions.
TXT Switches between teletext mode and television mode;
completes menu function.
z
Calls up the »PICTURE« menu;
turns one page back in teletext mode.
Ȅ Clock on/off;
turns to the next available page in teletext mode.
E
Selects chapter or held page desired in teletext mode.
F
Calls up the »SOUND« menu.
Selects topic desired, or fill in waiting time, in teletext mode.
–
i
+
Adjusts the colour.
– v
+
Adjusts the brightness.
SAT Switches to the operation of a GRUNDIG satellite receiver.
VIDEO Switches to the operation of a GRUNDIG video recorder.
TELEP ILOT 750C
VIDEO
VIDEO
21
3
654
987
0
P
OK
P
TXTAUX
E
Ȅ
F
SAT/TV
6
SETTINGS
____________________________________________________________________________
Setting TV channels –
automatically (with ATS searching)
The set is equipped with an automatic channel search system.
You start the ATS search and can then sort the television channels into an order
of your choice.
There are 99 channel positions available, which can be assigned to television
channels from the aerial or from the cable connection as desired.
You can also delete from the channel list television channels which are found
more than once, or which have poor reception.
1 Switching on the TV set with »IO « on the TV set.
– The »LANGUAGE SELECTION« menu will be displayed.
2 Select a language with »,«or».« and confirm with »OK«.
– The »SELECT COUNTRY« menu will be displayed.
3 Select a country with »,«or».« and confirm with »OK«.
Note:
If your country is not displayed in, select the line »others«.
The »MANUAL TUNING« menu will be displayed.
Using »,«or».«, select either »Cable (frequency sel./MHz)«or
»Cable/aerial (channel sel.)«, and confirm with »OK«.
– The »AUTOMATIC TUNING SYSTEM« menu will be displayed, and the
automatic channel search will begin.
– Depending on the number of channels received, this may take a minute or
longer.
– Following the search, the TV set will switch to channel position 1 and the
menu »SORT« will be displayed.
Deleting TV channels
1 In the »SORT« menu, select the TV channel to be deleted with »,«or
».«.
2 Delete the TV channel with »AUX «.
Note:
To delete further TV channels, repeat points 1 and 2.
AUTOMATIC TUNING SYSTEM
Please wait ...
■–
_–_–_–_–_–_–_–_–_–_–_–_–_–_–_–_–_–_
SORT
OK Sort
AUX Delete
Ǻ Return
TXT TV
ĵ
–––––––––––––––––
Ł
P 01 ARD
P 02 ZDF
P 03 RTL
P 04 SAT1
P 05 PRO7
P 06 BR 4
P 07
P 08
P 09
P 10
LANGUAGE SELECTION
OK
CZ Cestina
D Deutsch
DK Dansk
E Espanol
F Francais
FIN Suomi
GB English
H Magyar
I Italiano
N Norge
NL Nederlands
P Portugues
PL Polski
S Svenska
SI Slovenija
SK Slovensky
ĵ
–-–-––––––––––––––––––––––––––––––
Ł
SELECT COUNTRY
OK
A Österreich
B Belgique
CH Schweiz
CZ Ceska republ.
D Deutschland
DK Danmark
E Espana
F France
FIN Suomi
GB Great Britain
1/2
ĵ
––––––––––––––––––––––
Ł
ENGLISH
7
SETTINGS
___________________________________________________________________________________
Sorting TV channels
1 In the »SORT« menu, select the TV channel to be moved with »,«or
».«.
2 Mark the TV channel with »OK«.
3 Select a new channel position with »,«or».«.
4 Save the setting with »OK«.
Note:
To sort further TV channels, repeat points 1 to 4.
Completing the settings
1 Complete the settings with »TXT«.
Picture settings
Setting brightness, colour, contrast, definition and tint
1 Call up the »PICTURE« menu with »z «.
– The »PICTURE« menu appears.
2 Select the line »Brightness«, »Color«, »Contrast«, »Sharpness« or »Tint«
(color tone) with »,«or».« and set the required value with »F«or
»E« (»Tint« indication only for NTSC reception).
Note:
The set has been tested with maximum contrast in order to control the reliability of all modules. Depending on the location of the set and the light level in
the room (ambient light) it is nevertheless a good idea to reduce the contrast
slightly for optimum picture quality.
3 Complete the setting with »TXT«.
Perfect Clear
Perfect Clear increases contrast in dark areas of the picture. This gives the
picture depth.
1 Call up the »PICTURE« menu with »z «.
– The »PICTURE« menu appears.
2 Select the line »Perfect Clear« with »,«or».« and switch the function
on or off with »F«or»E«.
3 Complete the setting with »TXT«.
SORT
OK Sort
AUX Delete
Ǻ Return
TXT TV
ĵ
–––––––––––––––––
Ł
P 01 ARD
P 02 ZDF
P 03 RTL
P 04 SAT1
P 05 PRO7
P 06 BR 3
P 07
P 08
P 09
P 10
PICTURE
TXT
Brightness ľ ■■■■■■■■■–
_–_–_
ı
Color ■■■■■■■–
_–_–_–_–_
Contrast ■■■■■■■–
_–_–_–_–_
Sharpness ■■■■■■■–
_–_–_–_–_
n
Perfect Clear on
ĵ
–––––––––––
Ł
PICTURE
TXT
Brigthness ■■■■■■■■■ –
_–_–_
Color ■■■■■■■–
_–_–_–_–_
Contrast ■■■■■■■–
_–_–_–_–_
Sharpness ■■■■■■■–
_–_–_–_–_
n
Perfect Clear ľ on ı
ĵ
––––––––––
Ł
8
SETTINGS
___________________________________________________________________________________
Sound settings
Stereo depth
Widens the acoustic pattern for stereo programmes and improves it for mono
programmes.
1 Call up the »SOUND« menu with »
F
«.
2 Select the »
ʀ. ǁ
» lines with »,«or».«.
3 Select »
ʀ
.......
ǁ
« with »F«or»E«.
4 Complete the setting with »TXT«.
Dolby Surround*
Dolby Surround is an electronic solution which is fully integrated in the TV and
requires only 2 additional speakers to create Dolby Surround effects.
1 Call up the »SOUND« menu with »
F
«.
2 Select the »
ʀ. ǁ
» lines with »,«or».«.
3 Select »Dolby Surround« with »F«or»E«.
4 Complete the setting with »TXT«.
SOUND
TXT
ʀ. ǁ
ľ
ʀ
. . . . . .
ǁ
ı
ʀ P01 Stereo
y Stereo
u
ɼ
ɦ
ĵ
––––––––––––––––--–––
Ł
SOUND
TXT
ʀ. ǁ
ľ Dolby Surround ı
ʀ P01 Stereo
y Stereo
u
ɼ
ɦ
ĵ
––––––––––––––––--–––
Ł
* Under license from the Dolby Laboratories Licensing Corporation.
DOLBY and the double D symbol ij are trademarks of the Dolby Laboratories Licensing
Corporation.
Loading...