Grundig 26 VLE 8200 SL User Manual

LCD TV

26 VLE 8200 SL

ENGLISH

CONTENTS

-------------------------------------------------------------------------------------------------------------------------------------

4 SETUP AND SAFETY

6 GENERAL INFORMATION

6 Special features of your television set 7 Receiving digital channels 7 Important notes on environmental

protection

7 Notes on still images

8 CONNECTION AND PREPARATION

8 Connecting the antenna and power cord 9 Inserting batteries into the remote control

10 OVERVIEW

10 Connections on the television set 11 Controls on the television set 12 The remote control – Main functions 13 The remote control – All functions

14 SETTINGS

14 Initial set-up and tuning television

channels

14 Selecting language, country and

operating mode

15 Tuning the television channels from

satellite (DVB-S)

17 Tuning terrestrial television channels

(DVB-T)

17 Tuning television channels from the cable

provider (DVB-C)

18 Changing the program table for the

digital channels 21 Picture settings 22 Sound settings

24 TELEVISION - OPERATION

24 Basic functions 25 Zoom function 25 Eco mode 26 Zapping function 26 Electronic TV guide 27 Changing the picture format

28 SMART INTER@CTIVE TV AND

HOME NETWORK

28 What is Smart Inter@ctive TV 28 Network connection 28 Wired network 34 Smart Inter@ctive TV internet applications 36 Playback the video, music and image files

with home network connection

37 vTuner internet radio

38 USB RECORDING

38 Information on recording and playing

television programmes

38 Possible limitations when using an

external data medium 39 Connecting external data media 39 Settings for USB recording 41 ″Pausing” time shift programmes 41 Recording programmes 42 Presetting programmes to be recorded 44 Playback 44 Deleting programmes in the recording list

45 USB OPERATION

45 File formats 46 Connecting external

data media 47 The file browser 47 Settings in the USB setup menu 48 Basic playback functions 49 Additional playback functions

51 TELETEXT OPERATION

51 TOP text or FLOF text mode 51 Additional functions

52 INTERACTIVE PORTAL (HBBTV)

52 What is HbbTV? 52 Additional functions for video sequences

53 CONVENIENCE FUNCTIONS

53 Opening the SETTINGS menu 53 Language settings 54 Setting the date and time 54 Timer settings 55 Parental control settings 56 Updating software (OAD) 56 Updating software (Online) 56 Restoring the television to the default

settings

ENGLISH

CONTENTS

-------------------------------------------------------------------------------------------------------------------------------------

57 OPERATION USING EXTERNAL

DEVICES

57 DIGI LINK 57 The DIGI LINK functions on your television 58 Device operation 59 High definition HD ready 59 Connection options 60 Connecting external devices 61 Using a DVD player, DVD recorder,

video recorder

or set-top box 61 Headphones 62 Hi-fi System

64 OPERATION AS A PC MONITOR

64 Connecting a PC 64 Selecting presets for the PC 64 Settings for PC mode

65 OPERATION WITH A COMMON

INTERFACE

65 What is a Common Interface? 65 Inserting the CA module 65 Access control for CI module and

smart card

66 SPECIAL SETTINGS

66 Searching for digital television channels

from a satellite automatically 67 Searching for digital television

channels from a satellite manually 67 LNB settings 68 Settings for motorised antennas

(DiSEqC 1.2) 71 Searching for digital terrestrial

TV channels automatically 72 Searching for digital terrestrial

TV channels manually 73 Tuning analogue television channels 74 Changing stored analogue channels

76 INFORMATION

76 Displaying signal information 77 Technical data 78 Service information for dealers 78 Environmental note 79 Troubleshooting

ENGLISH

SETUP AND SAFETY

------------------------------------------------------------------------------------------------------

Please note the following instructions when setting up the television set:

This television is designed to receive and display video and audio signals.

All other uses are expressly prohibited.

The ideal viewing distance is five times the diagonal screen size.

Light falling on the screen impairs picture quality.

To ensure the device is always adequately ventilated, make sure there is sufficient space between the television set and nearby furniture.

The television is designed for use in dry rooms. If you do use it outdoors, make sure it is protected from moisture such as rain or splashing water. Never expose the television set to moisture.

Do not place any vessels such as vases on the television, as they may spill liquid, thus presenting a safety risk.

Place the television on a hard, level surface.

Do not place any objects such as newspapers on the television or put cloth or similar items under it.

Do not place the television close to heating units or in direct sunlight, as this will impair cooling.

Heat build-up can be dangerous and shortens the service life of the television. For reasons of safety, have a repairman remove any dirt in the television from time to time.

Never open the television under any circumstances. Warranty claims are excluded for damage resulting from improper handling.

Make sure the power cord or the power supply unit (if provided) are not damaged.

Only operate the television with the power supply/power cord provided.

Thunderstorms are a danger to all electrical devices. Even when the television is switched off, it can be damaged by a lightning strike to the mains or the antenna. Always disconnect the mains and antenna plugs during a storm.

Use a damp, soft cloth to clean the screen. Do not use water with soap or detergent.

Only clean the housing of your television set with the cloth provided. Do not use water with soap or detergent.

When deciding where to put the device, remember that furniture is often coated with various types of varnish and plastic. Many of these contain chemicals which can corrode the feet of the device, leaving marks on the surface of the furniture which can be difficult or impossible to remove.

The screen of your LCD/LED television meets the highest quality standards and has been checked for pixel faults.

Despite the great care taken in manufacturing, technological reasons make it impossible to completely discount the possibility that some pixels may be faulty. Provided they are within the thresholds specified by the DIN norm, pixel faults of this kind cannot be regarded as a defect as defined by the warranty.

To ensure fires do not occur, always keep candles and other open flames away from the device.

ENGLISH

Do not connect any other equipment while the device is switched on. Also switch off other equipment before connecting it.

Do not plug in the power cord of the device until you have connected the external equipment and the antenna.

Make sure the mains plug is freely accessible.

Do not expose the batteries to excessive heat such as direct sunlight, fire, etc.

Do not use old and unused batteries together.

Only replace the exhausted batteries with those having the same model, value and properties.

By ensuring proper disposal of these batteries, you will have contributed in prevention of potential hazards on the environment and human health that may arise from inappropriate disposal of the batteries.

Caution:

If you plan on using a wall bracket for your

television, make sure you read the assembly manual for the wall bracket or have a specialist assemble it.

When purchasing the wall bracket, make

sure that all the fastening points on the television are also on the wall bracket and that they are all used when mounting it.

SETUP AND SAFETY

------------------------------------------------------------------------------------------------------

ENGLISH

Special features of your television set

You can receive and watch digital TV channels using your television set (via DVB-S, DVB-T and DVB-C) – including High Definition programmes (HD). However, the reception of digital TV channels in HD is currently limited to a few countries in Europe.

Although this television set complies with the current DVB-S, DVB-T and DVB-C standards (status: August 2010), the compatibility with future DVB-S satellite transmissions as well as terrestrial DVB-T and DVB-C cable programmes cannot be guaranteed.

You r television set can receive and process all analogue and non-encrypted digital TV channels. The television set is also equipped with digital and analogue receivers.

The electronic TV guide (for digital channels only) informs you about any schedule changes at short notice, and provides an overview of all the broadcasters' schedules for the next few days. Detailed information on the individual television programmes are – when provided by the broadcasting station – are also available in the electronic TV guide.

You can connect various data media, such as an external hard drive, a USB memory stick or a digital camera, to the USB socket. Using the file browser, you can then select and play the file formats of your choice (for example, MP4, MP3 or JPEG data).

Using the time shift function, you can quickly and easily pause a programme using the remote control and resume it at a later stage. The programme is recorded in an external data medium.

GENERAL INFORMATION

---------------------------------------------------------------------------------

You can record any digital TV channels you choose.

The TV channels are converted by the television and saved on an external data medium which is connected to the USB socket. The saved programmes can be called up and played from the archive on the external data medium at any time. You can also play a programme from the archive while recording another.



More information on recording and playing

TV programmes can be found from page 38.

Smart Inter@ctive TV feature provides your TV with the Internet services and pages when it is connected to the Internet. You can visit popular video and photo sharing sites as well as social networks. And you can watch TV and listen to radio on web.

DLNA feature allows you to use a wired or wireless local network to access your content that were recorded with DLNA compatible devices we use at our daily lives such as a PC, mobile phone or NAS (Network Attached Storage) which are operated as DMS (Digital Medial Server). Thanks to DMR feature, when DLNA application has been started, you can automatically start and stop media playing on devices with DMC feature.

Devices that contain and serve video, music or image files are called Server. This television receives video, music and image files from the server through home network, allowing you to access and play such media even when your television is located in a different room then the server. A DLNA compatible device such as a PC, mobile phone, NAS or a NAS-like (Network attached storage) device which operates as a DMS (Digital Media Server) is required in order to use home network.

ENGLISH

GENERAL INFORMATION

---------------------------------------------------------------------------------

Receiving digital channels

You require a satellite antenna to receive digital satellite channels (DVB-S).

Your TV supports SCR system (Satellite Chan-

nel Router). If your antenna installation is equipped with an Single Cable Distribution multiswitch, all television sets which are connected on this antenna can receive the television channels stand-alone.

You require a digital roof antenna or indoor antenna (passive or active indoor antenna with its own power supply) to receive digital television channels (DVB-T).

If you wish to receive digital television channels via your cable system (DVB-C), the antenna cable for your cable operator must be connected to the television set.

Unlike analogue broadcasting, not every channel has its own transmission frequency. Instead, several channels are grouped into what are known as bouquets on a regional or national level. You can find the current transmission information on teletext from various broadcasters, or by consulting a current TV guide or the Internet.

Various digital television channels from private broadcasters are encrypted (DVB-S, DVB-T and DVB-C). Watching these channels and the recording and playback functions are only possible with the appropriate CI module and a SmartCard. Ask your specialist dealer.

The range of channels available from the pub-

lic broadcasting institutions (ARD with EinsExtra, EinsFestival or ZDF with ZDF Info and all third party broadcasters) are not encrypted and can be received without a SmartCard.

Important notes on environmental protection

The following information will help you to save resources – and money as well.

If you are not using your television set for several days, you should pull out the mains plug for environmental and safety reasons. This way the television does not consume any electricity.

As switching off the television set does not completely disconnect it from the mains, pull out the plug to disconnect it from the mains completely.

If the device is equipped with a power switch, switching it off using this switch will be sufficient. The energy consumed by the television set is reduced to virtually 0 W.

In standby mode, the television set uses very little energy. However, it may be necessary to leave the television set in standby mode for certain functions (for example automatic switch-on and switch-off and for timer functions).

The television set uses less energy when the brightness is reduced.

Notes on still images

Watching the same image for a long time on the screen may cause a still image remains feebly on the background. Feeble image(s) on the background is originated from LCD/LED technology and does not require any action under guarantee. To avoid such cases and/or minimize the impact, you may observe the tips below.

Do not allow the same TV channel to stay on the screen for a very long time. Channel logos may cause this situation.

Do not allow the images, which are not full screen, to constantly stay on the screen; if not streamed in full screen format by the broadcaster, you can convert the images to full screen by changing picture formats.

Higher brightness and/or contrast values will lead this impact to appear faster; therefore, you are recommended to watch your TV in the lowest brightness and contrast levels.

ENGLISH

CONNECTION AND PREPARATION

-----------------------------------------------

Connecting the antenna and power cord

1 To receive digital satellite channels (DVB-S),

connect the satellite antenna cable to the antenna socket »SATELLITE« on the television set.

And/or:

To receive terrestrial digital broadcasters (DVB-T) connect the cable for the rooftop or indoor antenna (passive or active indoor antenna with its own power supply) to the antenna socket »ANT IN« on the television set;

2b To receive digital cable channels (DVB-C)

connect the cable for the rooftop antenna to the antenna socket »ANT IN« on the television set;

2c To receive analogue TV channels, connect

the cable for the rooftop antenna to the antenna socket »ANT IN« on the television set

Note:

When connecting an indoor antenna you

may have to try it out at different positions until you get the best reception.

3 Plug the power cord into a wall socket.

Note:

Do not plug in the power cord of the device

until you have connected the external equipment and the antenna.

Only use the power cord supplied to connect

the television set to a suitable earthed safety socket.

Do not use an adapter plug or extension

lead which does not meet the applicable safety standards. Do not tamper with the power cord.

ENGLISH

Inserting batteries into the remote control

CONNECTION AND PREPARATION

-----------------------------------------------

1 Open the battery compartment by removing

the lid.

Insert the batteries (2 x 1.5 V micro, for example R03 or AAA). Observe the polarity marked in the bottom of the battery compartment.

3 Close the battery compartment.

Note:

If the television no longer reacts properly

to remote control commands, the batteries may be flat. Always remove used batteries.

The manufacturer accepts no liability for

damage caused by leaking batteries.

Environmental note

This symbol on rechargeable batteries/batteries or on the packaging indicates

that the rechargeable battery/battery may not be disposed of with regular household rubbish. For certain rechargeable batteries/batteries, this symbol may be supplemented by a chemical symbol. Symbols for mercury (Hg) or lead (Pb) are provided if the rechargeable batteries/batteries contain more than 0.0005% mercury or more than 0.004% lead.

Rechargeable batteries/batteries, including

those which do not contain heavy metal, may not be disposed of with household waste. Always dispose of used batteries in accordance with local environmental regulations. Make enquiries about the applicable disposal regulations where you live.

ENGLISH

OVERVIEW

------------------------------------------------------------------------------------------------------------------------------------

Connections on the television set

AV1 / S-VHS SCART socket (CVBS signal,

RGB signal); Video and sound socket for S-Video camcorder.

COMPONENT Y Pb Pr Sockets for video input

(YUV signal).

L R Sockets for audio input

(YUV signal).

Optic Out Socket for audio output

(optical) for PCM/AC3 signals. For connecting digital AV amplifiers or AV receivers.

AUDIO OUT L R Sockets for audio output.

Audio Socket for audio

input for a PC.

PC-IN VGA socket, video input

for PC.

SATELLITE Antenna socket for the

satellite antenna (DVB-S).

ANT IN Antenna socket for a DVB-T,

DVB-C and analogue antenna.

ENGLISH

OVERVIEW

------------------------------------------------------------------------------------------------------------------------------------

HDMI2 (ARC) HDMI socket,

audio/video input.

HDMI3 HDMI socket,

audio/video input.

HDMI4 HDMI socket,

audio/video input.

USB2 (HDD) USB socket for external

data media and PVR function.

LAN Network cable connection

socket.

U Headphone jack (3.5 mm

jack plug); Sockets for audio output.

AV2

Video Video socket for

camcorder

L R Audio socket for

camcorder.

USB1 USB socket for external

data media without a power supply of their own and PVR function.

HDMI1 HDMI socket,

audio/video input.

CI Common Interface Slot.

Controls on the television set

8/I Switches the television on and

back into standby mode.

V– V+ Adjusts the volume;

selects menu functions.

MENU Opens the menu.

Select a menu option with »P+« or »P–«. Activate the function with »V+«. Confirm the function with »V+« or »V–«.. Press »MENU« to quit the menu.

SOURCE Opens the pre-selection for

AV channels. In the menu, press »P+« or »P–«

to select and press »SOURCE« to confirm.

P– P+ Switches the television on from

standby; selects channels in steps; selects function in the menu.

ENGLISH

OVERVIEW

------------------------------------------------------------------------------------------------------------------------------------

The remote control – Main functions

Switches on and off (Standby).

Opens menu for AV channels and USB input. Then select using »

«, »<«,

« or »Λ« and press

»OK«

to confirm.

Muting

Opens the »PRnP« menu.

Zapping function;

switches back one menu level in the menus.

Opens the main menu.

Opens the TOOLS menu.

Switches between teletext and TV mode; opens/closes the control menu when playing a file in DLNA menu.

Opens the electronic TV guide.

Switches on from standby; Selects channel – in steps.

Adjusts the volume.

Navigation in the menus

Moves the cursor up and down in the menus.

Moves the cursor to the left and right in the menus.

Activates various functions and

save functions/settings.

Displays information.

Opens the Smart inter@ctive menu.

Opens the channel list.

Key has no function.

Switches on from standby; Selects channel – directly.

Selects the channel list (»All«, »FAV 1« to »FAV 4«).

Record, play, pause and stop (only digital television channels) on/from an exter- nal data medium.

ENGLISH

OVERVIEW

------------------------------------------------------------------------------------------------------------------------------------

The remote control – All functions

@ Opens the Smart inter@ctive menu.

(red)

Selects pages in teletext;

(green)

Selects/activates various functions

yyy

(yellow)

in the menus.

yyyy

(blue)

5 Selects different audio settings;

Switches to double character size in teletext; Selects the next title/next picture in the file browser.

6 Selects different picture settings;

Refreshes a teletext page; Selects the previous track/previous picture in the file browser.

Stops scrolling through pages in

teletext; Starts a fast reverse search in the file browser.

Selects the channel list ( »All«,

»FAV 1« to »FAV 4«); Reveals answers in teletext; Starts a fast forward search in the file browser.

Starts the recording (

only for digi-

tal television channels

, the recording is made on an external data medium).

8 Starts playing a programme from

an external data medium; Repeats a recorded programme; Starts playing in DLNA and vTuner menu.

! Freeze frame, if no external data

medium is connected; Playback pause; Time shift mode (only for digital television channels and when an external data medium is connected); Pauses the file being played in DLNA and vTuner menu.

7 Ends playback of a programme

from an external data medium; Ends a recording or playback in time shift mode; Splits the screen in teletext; Ends playing in DLNA and vTuner menu.

Selects different audio languages (only for digital television channels)

Selects different subtitles

(only for digital television channels)

Note:

Your TV supports remote control feature

for Apple iPhones and Android phones. Depending on the features of your TV, you may control your TV by your phone after downloading the free »GRUNDIG TV Remote« application from Apple App. Store or Android Market and install it on the Apple iPhone/Android phone.

ENGLISH

SETTINGS

-----------------------------------------------------------------------------------------------------------------------------------------

Initial set-up and tuning television channels

The television set is equipped with automatic channel search, which searches for satellite channels (DVB-S), terrestrial channels (DVB-T), cable channels (DVB-C) and analogue channels.

You start the search and the television channels will be stored into the Program Table. Following, you can sort the television channels in the Program Table.

For DVB-S channels there are 6000 presets available, for DVB-T and DVB-C channels 100 0 presets, and 99 presets for analogue channels.

The various settings

Depending on the type of antenna connected, you can decide which channels you would like the television to search for.

Tunes digital television channels from the satellite, from page 15.

You have two options for this search:

–

the basic installation which presets a standard selection, e.g. the satellite Astra 19 .2° East; you need only start the search;

–

the professional installation, which allows you to make all required settings and set parameters for your receiver system.

Tunes digital terrestrial television channels, on page 17 .

Tunes digital television channels from the cable provider, on page 17 .

Tunes analogue television channels, in the chapter “Special functions”, starting on page 73.

Further settings for digital television channels after the initial set-up can also be found in the chapter “Special Settings”, starting on page 66.

Note:

Make the language and country selection for all types, then continue reading the respective chapter.

Selecting language, country and operating mode

1 Switch on the television set from standby with

8«, »1…0« or »P+« or »P-«.

–

During initial set-up, the »Installation Guide« will be displayed.

Help:

If this menu is not displayed, restore the

television set to its default settings (see page 56).

2 Select the menu language with »

«, »>«,

« or »Λ« and press

»OK«

to confirm.

3 Select the mode with »

« or »>« and press

»OK«

to confirm.

– The settings used in »Home Mode« help to

save energy.

–

Alternatively, the menu item »Shop Mode« can be selected which the retailer can use for demonstrating the device functions.

Note:

End the »Shop Mode« by restoring the televi-

sion set to its default settings (see page 56).

4 Select the country in which the television set

is operated with »

«, »>«, »V« or »Λ« and

press

»OK«

to confirm.

– The »Source Setup« menu appears with the

»Connection Type« line marked.

Note:

You can find a description of how to tune

the television channel of your choice – depending on the antenna connected – in the following chapters.

ENGLISH

Tuning the television channels from satellite (DVB-S)

You have two options for tuning digital satellite channels.

A The easy installation,

which pre-configures all antenna settings for

the satellite channels on Astra 19.2° East.

B The advanced installation

can be used if you wish to receive satellite

channels from various satellites. To do so, you must make the antenna settings (Satel- lite, LNB Power, LNB Type, DISEqC Mode, LNB Selection) for the satellites chosen.

Easy installation

1 In the »Source Setup« menu, in the »Connec-

tion Type« line, select the option »Satellite« with »

« or »>«.

2 Select the line »Easy Installation« with »

or »

« and press

»OK«

to confirm.

– Other menu options will be displayed,

the satellite Astra 19.2° East is preset.

3 Start the scan with »yy« (green).

– The »Search results« menu appears, and

the scan for TV channels begins.

– Depending on the number of television

channels received, this can easily take a few minutes.

– The scan is complete as soon as the »PRO-

GRAM TABLE« appears.

Note:

You can abort the scan by pressing

»MENU«.

Advanced installation

1 In the »Source Setup« menu, in the »Connec-

tion Type« line, select the option »Satellite« with »

« or »>«.

2 Select the line »Advanced Installation« with

« or »Λ« and press

»OK«

to confirm.

– The menu appears.

Satellite

ASTRA*2A°,E

Transponder

10714

LNB*Type

Universal

DISEqC*Mode

Off

LNB*Power*

Off

LNB*Selection

Off

Auto*Tuning

Quality

Signal*strength

Low************Normal*************Good

Exit

Back

INSTALLATION

ANTENNA*SETTINGS

Manual*Tuning

20.07.2011 15:46

3 Select the line »Satellite« with »V« or »Λ«

and press

»OK«

to confirm. – The »SELECT SATELLITE« menu appears. Select the satellites with »

«, »Λ«, »<« or

« and press

»OK«

to confirm.

Note:

The setting in the line »Transponder« is not

required for this automatic scan.

4 Select the line »LNB Power« with »

« or

«.

Depending on the type of LNB, set the LNB

power supply to »13/18 V« or »14/19 V« with »

« or »>«.

5 Select the line »LNB Type« with »

« or »Λ«.

Select the type of LNB installed with »

or »

«.

SETTINGS

-----------------------------------------------------------------------------------------------------------------------------------------

ENGLISH

6 Select the line »DISEqC Mode« with »V«

or »

«.

Select »DiSEqC 1.0« or »DiSEqC 1.1« in

accordance with the existing antenna system with »

« or »>«.

– DiSEqC 1.0 allows up to four satellites to

be received simultaneously.

– DiSEqC 1.1 allows up to 16 satellites to be

received simultaneously.

7 Select the line »LNB Selection« with »

« or

«.

Select the setting for the respective satellites

with »

« or »>«.

8 Once the settings for the satellite have been

made, switch to the »AUTOMATIC CHAN- NEL SEARCH« menu with »y« (red).

Select&Satellite

ASTRA&2A&,&E

Service&Type

All

Scan&Mode

Free&+&Scramble

Network&Search&

Off

Connection&Type

Satellite

Exit Back

SOURCE&SETUP

AUTOMATIC&CHANNEL&SEARCH

Start&Search

20.09.2010 15:46

9 Select the line »Scan Mode« with »V«

or »

«.

Select the scan mode with »

« or »>« (for unencrypted channels, for encrypted channels only, or for both).

10 Select the line »Service Type« with »

or »

«.

Use »

« or »>« to select whether you want to search for television channels only (TV), radio stations only (Radio) or both (Radio + TV).

11 Start the scan with »y« (red).

– The »Results« menu appears, and the scan

for TV channels begins.

– Depending on the number of television

channels received, this can easily take a few minutes.

– The scan is complete as soon as the »PRO-

GRAM TABLE« appears.

Note:

You can abort the scan by pressing

»MENU«.

12 Press »MENU« to end the setting.

Note:

If other television channels are to be tuned

from a second satellite, proceed as follows:

Open the menu with »MENU«, select the

line »SOURCE SETUP« with »

« or »Λ«

and press

»OK«

to confirm. Then select the

»Automatic Channel Search« with »

« or

« and press

»OK«

to confirm. Confirm

the line »Select Satellite« with

»OK«

and

select the preferred satellite with »

«, »Λ«,

« or »>«. Start the scan with »y« (red). Continue the adjustment by step 7 of the chapter.

Note:

Before recording HD channels, please

check signal quality and Strength, see chapter "Displaying signal information" on page 76 . If the level is displayed in green, you can record HD channels without any problems.

SETTINGS

-----------------------------------------------------------------------------------------------------------------------------------------

ENGLISH

SETTINGS

-----------------------------------------------------------------------------------------------------------------------------------------

Tuning terrestrial television channels (DVB-T)

1 In the »Source Setup« menu, in the »Connec-

tion Type« line, select the option »Air« with »

« or »>«.

2 Select the line »Scan Type« with »

« or

«.

Use »<« or »>« to set the required scan

type: – »DTV«, scan for digital television channels; – »ATV«, scan for analogue television

channels;

–

»ATV & DTV«, scan for analogue and digital television channels.

Caution:

The antenna power supply (5V ) may only

be switched on if the antenna is an active indoor antenna with a signal amplifier and it is not already supplied with a voltage via a mains plug (or similar supply). Otherwise you may cause a short circuit and irreparably damage your antenna.

Select the line »Active Antenna Power« with

or »Λ«.

Switch on the antenna power supply for the

antenna with »<« or »>« (»On«).

4 Start the scan with »yy« (green).

– The »Search Results« menu appears, and

the search for TV channels begins.

– Depending on the number of television

channels received, this can easily take a few minutes.

– The scan is complete as soon as the »PRO-

GRAM TABLE« appears.

Note:

You can abort the scan by pressing

»MENU«.

5 Press »MENU« to end the setting.

Note:

Before recording HD channels, please

check signal quality and Strength, see chapter "Displaying signal information" on page 76 . If the level is displayed in green, you can record HD channels without any problems.

Tuning television channels from the cable provider (DVB-C)

1 In the »Source Setup« menu, in the »Connec-

tion Type« line, select the option »Cable« with »

« or »>«.

2 Select the line »Scan Type« with »V« or »Λ«.

Use »

« or »>« to set the required scan type: – »DTV«, scan for digital television channels; – »ATV«, scan for analogue television channels; –

»ATV & DTV«, scan for analogue and digital television channels.

3 Select the line »Cabel Scan Type« with »V«

or »

«. Select the preferred option (»Quick«

or »Full«) with »

« or »>«.

– The search function »

Quick

« sets up the channels according to the information provided by your cable provider in the transmission signal.

– If the option »Full« is selected, the entire

frequency range will be scanned. The search can take a long time with this option. This option is recommended if your cable provider does not support the scan type

Quick«.

Note:

You can accelerate the search. To do this,

you need information about the frequency and

network ID. You are usually able to get this data from your cable operator or find it in forums on the Internet.

4 Start the scan with »yy« (green).

–

The »Search Results« menu appears, and the search for TV channels begins.

– Depending on the number of television

channels received, this can easily take a few minutes.

– The scan is complete as soon as the »PRO-

GRAM TABLE« appears.

Note:

You can abort the scan by pressing

»MENU«.

5 Press »MENU« to end the setting.

Note:

Before recording HD channels, please check

signal quality and Strength, see chapter "Displaying signal information" on page 76 . If the level is displayed in green, you can record HD channels without any problems.

ENGLISH

Changing the program table for the digital channels

Channels which are found using the scan are saved in the »PROGRAM TABLE«.

You can delete channels which are not required from the programe table, you can change the order of channels within the programe table and lock individual channels (Parental control).

You can also add channels to the favourites list; in addition, you can change the order of chan- nels within the favourites list.

With »yy« (green) you can display the channels which belong to one network.

Switch to the next page in the programe table with »P+« and to the previous page with »P-«.

With »

yyy

« (yellow) you can open the »LIST MANAGEMENT« within the programe table. In this List Management you can create your own favourites lists.

With »

yyyy

« (blue) you can sort the channels ac- cording different criteria.

Selecting channel lists

1 Open the menu with »MENU«.

2 Select the »SOURCE SETUP« menu with »

or »

« and press

»OK«

to confirm.

– The »SOURCE SETUP« menu appears.

3 Select the line »Programe Table« with »

or »

« and press

»OK«

to confirm.

– The menu »PROGRAM TABLE« appears.

Important:

Programe table and favourites lists are

saved separately according to the different input sources (satellite, cable, air).

When opening the programme table, the

respective channel list for the current input signal appears.

Note:

If in the Program Table appears added

to the name of the channel, you need a CI module and a Smart-Card for watching these channels.

SETTINGS

-----------------------------------------------------------------------------------------------------------------------------------------

!""#$%"&'%()"*#

#+,

"-""&./%012%

#+,

!!""*#"!

"""#+,

!-""+,"345'(

"""#+,

6""7#8"*#

#+,

9""$'()

#+,

!6"":.;)

"""#+,

!9""3$(<=

"""#+,

>""$'()"*#

#+,

=""0?5)/.@

#+,

!>""8.1A

"""#+,

!=""3BC

"""#+,

D""E6D

#+,

F""+)%(GH

#+,

!D""0'5A5

"""#+,

!F""+,-

"""#+,

I""&./%;)%(.J$1

#+,

!K""LEMN&"*#

"""#+,

!I""345'(!

"""#+,

6K""+,I

"""#+,

!"""#$%"&'%()"*#

ME3+L::L+MOE

0HOPHLQ"+LR:&

&S.( LSS"+5"8$J<E)(T5'U 35'(

&@.( R$VU

E)(T5'U"L::

3)1)V("8$J5'.()

3)'J.V) L::

ENGLISH

SETTINGS

-----------------------------------------------------------------------------------------------------------------------------------------

Deleting channels

In the

»PROGRAM TABLE«

menu, select the

Edit mode by pressing

»y« (red)

Select the television channel to be deleted with

»V«, »Λ«, »<« or »>«

and press

yyy

(

yellow

) to delete.

Note:

You can delete all channels with »

yyyy

(blue).

3 Confirm the deletion process with »yy«

(green); or cancel the deletion process with »y« (red);

4 Quit the program table with »MENU«.

Change the order of the channels in the program table

In the

»PROGRAM TABLE«

menu, select the

Edit mode by pressing

»y« (red)

2 Select the channel which should be moved

with »

«, »Λ«, »<« or »>« and mark it with

»y« (red).

3 Move the channel to its new position with

«, »Λ«, »<« or »>« and press

»OK«

confirm.

Note:

Repeat steps 2 and 3 if you would like to

change other channels.

4 Quit the program table with »MENU«.

Sorting channels in the program table

You can sort the order of the channels in the program table according different criteria: in order of Satellite, alphabetical or in order of encryptied/free channels.

In the

»PROGRAM TABLE«

menu, select the

Sort mode by pressing

yyyy

« (blue)

2 Select the sort criteria with »y« (red), »yy«

(green)

yyy

« (yellow).

3 Quit the program table with »MENU«.

Skipping channels

You can mark television channels which should be skipped when selecting with »

« or »V«. It is still possible to select them using the number buttons.

1 In the »PROGRAM TABLE« menu, switch

over to the list view with »

yyy

« (yellow).

2 Select the preferred channel with »

or »

«.

3 Select the column »Skip« with »

« or »>«

and use

»OK«

to mark the channel.

– The channel is marked by »«.

4 Quit the program table with »MENU«.

Note:

Channels can also be reactivated. Select the

channel with »

« or »Λ«, then select the

column »Skip« and reactivate the channel with

»OK«

Creating lists of favourites

You can save your favourite channels in up to four favourites lists (FAV 1 to FAV 4).

Notes:

Favourites lists must be created separately

for all input sources (satellite, cable, air).

You can select the favourites list by pressing

FAV

«.

1 In the »PROGRAM TABLE« menu, switch

over to the list view with »

yyy

« (yellow).

2 Select the channel of your choice with »

or »

«.

3 “Push” the channel into the favourites

lists 1 to 4 with »

« or »>« and press

»OK«

to confirm.

– The position in the favourites list is marked

with »«.

– You can enter the same channel in more

than one favourite list.

–

Each favourite list can store up to 255 channels.

ENGLISH

Note:

Channels can also be deleted from the

favourites lists. Select

the

channel to be

deleted with »

«, »Λ«, »<« or »>«

and

press

»OK«

to delete it.



When deleting a channel from the favourites

list, the order within the favourites list will be updated.

4 Quit the program table with »MENU«.

Sorting channels in the favourite list

You can change the order of channels in the favourites list.

1 In the »PROGRAM TABLE« menu, select the

favourites list »1« to »4«.

2 Select the channel which should be moved

with »

«, »Λ«, »<« or »>« and mark it with

»y« (red).

3 Move the channel to its new position with

«, »Λ«, »<« or »>« and press

»OK«

confirm.

Notes:

Repeat steps 2 and 3 if you would like to

change other channels within the same favourites list.

Repeat steps 1 to 3 if you would like to

change channels in a different favourites list.

4 Exit the current favourites list with »

yyyy

(blue).

– The entire programe table will appear

again.

5 Quit the program table with »MENU«.

SETTINGS

-----------------------------------------------------------------------------------------------------------------------------------------

Enter own names for the favourites lists (max. 6 characters)

You can enter own names for all favourites lists.

1 In the »PROGRAM TABLE « menu, switch over

to the list view with »

OOO

« (yellow).

2 Select the desired favourites list with »1« till

»4«.

– The Favorite Name screen is displayed.

3 Delete the „old“ name (FAV1), for this

purpose select with »

«, »Λ«, »<« and

»>« the push button »x« and delete the character with »OK«.

4 Select the required character/numeric with

«, »Λ«, »<« and »>« and confirm with

»OK«.

Repeat the procedure for further characters/

numerics.

– Select »ABC« for uppercase and »abc«

for lower case and confirm with »OK«.

– Select »?@123« for numbers and

symbols and confirm with »OK«.

5 Confirm the new name, select the push

button »Submit« with »

«, »Λ«, »<« or

« and confirm with »OK«.

6 Press »MENU« to end the seting.

ENGLISH

SETTINGS

-----------------------------------------------------------------------------------------------------------------------------------------

Picture settings

1 Open the menu with »MENU«.

2 Select the menu item »PICTURE SETTINGS«

with »

« or »Λ« and press

»OK«

to confirm.

– The »PICTURE SETTINGS« menu appears.

Picture(Mode

User

Brightness

Sharpness

Colour(Temperature

DNR

Normal

Off

Contrast

100

Colour

MPEG(NR

Off

Exit Back

PICTURE(SETTINGS

Advanced(Tuning

20.09.2010 15:46

3 Select the line »Picture Mode«, »Bright-

ness«, »Contrast«, »Sharpness«, »Colour«, or »Colour Temperature« with »

« or »Λ«.

Select the value with »

« or »>« and press

»OK«

to confirm.

Notes:

When changing the values with »<« or »>«,

the screen will be split. You can see the current picture value on the left side, the new setting on the right side.

In the »PICTURE SETTINGS« menu you can

also find other additional settings.

4 Select the line »DNR«, »Mpeg NR«, »Vibrant

Colour«, »Perfect Clear«, »Film Mode«, »Gamma«, »Dynamic Contrast«, »Dynamic Backlight«, »Backlight« or »MEMC« with »

« or »Λ«.

Select the value with »

« or »>« and press

»OK«

to confirm.

Notes:

You can only select the »Mpeg NR« function

on digital and AV presets. »Mpeg NR« reduces any interference

from artefacts (pixel blocks) from digital programmes due to MPEG compression (such as from DVB-T receivers or DVD players).

The »Film Mode« detects and processes

feature films automatically for all channel sources. This means you will always receive an optimal picture.

This functions in the modi 480i, 576i and

1080i in TV playback and for other channel sources.

If the »Film mode« is switched on for

programmes without a feature film signal, minor problems such as picture freeze, defective subtitles or fine lines in the picture could occur.

The function »Dynamic Contrast« adapts the

contrast dynamically and optimally for the respective picture content.

With »Dynamic Backlight«, the device

optimally adapts the background lighting to the picture content.

The »Backlight« can only be set manually

when the function »Dynamic Backlight« is deactivated.

»MEMC« will only appear in menus of LCD

products with 200 Hz PPR Feature and LED products with 400 Hz PPR feature..

5 Press »MENU« to end the setting.

ENGLISH

SETTINGS

-----------------------------------------------------------------------------------------------------------------------------------------

Sound settings

1 Open the menu with »MENU«.

2 Select the menu item »SOUND SETTINGS«

with »

« or »Λ« and press

»OK«

to confirm.

– The »SOUND SETTINGS« menu appears.

Volume

Balance

Sound/Type/

Stereo

SRS/Sound/Preset

Headphone

Audio/Output/Setup

Sound/Mode

SRS/TS/HD

Speech

End Back

SOUND/SETTINGS

External

Accessibility/Settings

20.09.2010

15:46

Note:

Additional operations are explained in the

following sections.

Volume

1 Select the line »Volume« with »V« or »Λ«

and change the setting with »

« or »>«.

Balance

1 Select the line »Balance« with »V« or »Λ«

and change the setting with »

« or »>«.

Automatic volume

Television stations broadcast at different volumes. The automatic volume limiting (AVL) function means the volume is kept the same when you switch between channels.

1 Select the line »AVL« with »

« or »Λ« and

select the option »On« with »

« or »>«.

Note:

If the »SRS TS HD« setting has been selected

in the »Audio Mode« line, the AVL line cannot be selected.

Stereo/two channel sound, mono

If the device receives two-channel-sound programmes, e.g. a film with the original soundtrack on audio channel B (display: »Dual II«) and the dubbed version on sound channel A (display: »Dual I«), you can select the audio channel you prefer.

If the device receives stereo or Nicam programmes, it switches automatically to stereo sound (display: »Stereo«).

You can switch the sound to »Mono« if the stereo sound quality is poor.

1 Select the line »Audio Type« with »

« or

« and adjust the setting with »<« or »>«.

Stereo width

This broadens the sound output for stereo programmes and improves the sound with mono reception.

1 Select the line »Audio Mode« with »

or »

«.

2 Select the option »Spatial« with »

« or »>«.

ENGLISH

Soundeffects

This menu offers three preset sound effects (Music, Natural and Speech) and one setting to be created by you (User).

1 Select the line »Sound Preset« with »

« or

«.

2 Select the sound effect »Music«, »Natural«

or »Speech« by pressing »

« or »>«.

Note:

»User« option is active when »Sound mode«

setting is selected as »Normal or »Spatial«.

SRS TruSurround HD

SRS TruSurround HD is a patented audio technology which is integrated into the television set and only requires the built-in speakers to generate a Surround Sound effect.

1 Select the line »Sound Mode« with »

or »

«.

2 Select the option »SRS TS HD« with »

« or

«.

3 Select the line »SRS Sound Preset« with »

or »

«.

4 Select the sound effect »Music«, »Natural«

or »Speech« with »

« or »>«.

SETTINGS

-----------------------------------------------------------------------------------------------------------------------------------------

Equalizer

Equalizer offers a sound setting ”User” that you can create.

Equaliser appears in the menu when »Sound mode« is selected as »Spatial« or »Normal«, and »Sound Medium« as »User«.

1 Select »Equalizer« with »

« or »Λ« and

press

»OK«

to confirm.

The »EQUALIZER« menu appears.

Note:

If the »SRS TS HD« setting has been selected

in the »Sound Mode« line, the »Equalizer« line will not indicate.

2 Select the frequency bandwidth »120Hz«

with »

« or »Λ«.

Set the preferred value with »

« or »>«.

3 Set the next frequency bandwidth with »

or »

« and repeat the setting.

4 Press »<« to save the setting.

Audio description (Audio subtitles)

Audio description is an additional audio channel for visually-impaired persons. Descriptions are provided of activities, surroundings, changes of scene, gestures and actors' facial expressions.

This audio channel is transmitted simultaneously with the normal sound on digital channels. Availability depends on the respective channel and broadcaster.

1 Select the line »Audio Description« with »

or »

« and select the option »On« with »<«

or »

«.

2 Select the line »Volume« with »

« or »Λ«

and change the volume with »

« or »>«.

Exiting the setting

1 Press »MENU« to end the setting.

* Under licence from SRS Labs, Inc. TruSurround HD,

SRS and the

symbol are trademarks of

SRS Labs, Inc.

ENGLISH

TELEVISION - OPERATION

--------------------------------------------------------------------------------

Basic functions

Switching on and off

1 Press »8«, »1…0« or »P+« or »P-« to switch

on the television from standby mode.

2 Press »

8« to switch the television to standby.

Selecting channels

1 Press »1…0« to select presets directly.

2 Select channels step by step with »P+« or

»P-«.

3 Open the channel list with

»OK«

, select the

preferred television channel with »

«, »Λ«,

« or »>« and press

»OK«

to confirm.

Exit the channel list with »MENU«.

Selecting channels from lists

You can select channels from various lists (e.g. all channels, FAV 1 to FAV 4).

1 Press »

FAV

« to open an overview of pro-

grame tables.

– The overview is displayed.

2 Select a channel list with »

« or »V« and

open it with

»OK«

3 Select a television channel with »

«, »Λ«,

« or »>« and press

»OK«

to confirm.

4 Press »MENU« to exit the channel list.

Selecting a preset AV channel

1 Open the »Select Source« menu with » «.

2 Select an AV preset with »

«, »Λ«, »<« or

« and press

»OK«

to confirm.

3 Use »1…0« to switch back to the television

channel.

Adjusting the volume

1 Adjust the volume with »

–

«.

Switching sound on/off

Press »p« to mute the sound or switch it on again.

Displaying information

1 Display information, press »?« repeatedly.

– The display disappears automatically after

a short while.

Freeze-frame

If you wish to view a particular scene for longer, you can “freeze” the frame of the current programme.

1 Activate the freeze-frame function with »

$«.

2 End the freeze-frame function with »

$«.

Note:

If an external data medium is connected

to the television, the time shift function is activated with »

$«. The time shift function is

described on page 41 .

Picture settings

Various picture settings are available.

1 Open the Tools menu with »TOOLS«.

2 Select the menu item »Picture Mode« with

« or »Λ«.

3 Select »User«, »Eco TV«, »Vivid«, »Natural«,

»Movie«, »Sports« or »Game« by pressing »

« or »>«.

– You can change the »User« picture setting;

see “Picture settings” on page 21.

Note:

Picture setting »Game« can only be selected

in »HDMI«, »Component« and »PC« modes.

ENGLISH

Audio settings

Various audio settings are available.

1 Open the Tools menu with »TOOLS«.

2 Select the menu item »Sound Preset« with

« or »Λ«.

3 Select the audio setting »User«, »Music«,

»Natural« or »Speech« by pressing »

« or

«.

– You can change the »User« audio setting

– see the “Soundeffects” chapter on page

23.

Note:

»User« option is active when »Sound mode«

setting is selected as »Normal or »Spatial«.

Audio language

Various languages are available on digital television channels. This depends on the programme being broadcast.

1 Open the selection menu with »

«.

2 Select the language by pressing »

« or »Λ«

and press

»OK«

to confirm.

Subtitles

Various subtitles are available on digital television channels. This depends on the programme being broadcast.

1 Open the selection menu with »

«.

2 Select the subtitles with »

« or »Λ« and

press

»OK«

to confirm.

TELEVISION - OPERATION

--------------------------------------------------------------------------------

Zoom function

This function allows you to enlarge the picture as required.

1 Open the Tools menu with »TOOLS«.

2 Select the menu item »Zoom« with »

« or

«.

3 Press »OK« repeatedly to enlarge the

display in three steps.

Eco mode

This function allows you to reduce the power consumption.

1 Open the Tools menu with »TOOLS«.

2 Select the menu item »Eco TV« with »

« or

«.

3 Switch on the Eco mode with »

« or »>«.

4 Switch the Eco mode off again with »

« or

«.

ENGLISH

TELEVISION - OPERATION

--------------------------------------------------------------------------------

Zapping function

This function remembers the channel you are currently watching while you switch over to other ones (zapping).

1 Press »1…0« or »P+«, »P–« to select the

channel to be stored in the zapping memory and press »<« to confirm.

2 Press »1…0« or »

«, »V« to switch to

another television channel.

3 Press »<« to switch between the saved tel-

evision channel and the last television channel viewed.

4 End the function with »MENU«.

Electronic TV guide

The electronic TV guide provides an overview of all programmes that will be broadcast in the next week (for digital channels only).

Press

»GUIDE«

to display channel informa-

tion.

Notes:

Not all channels supply provide a detailed

TV guide.

Many broadcasters transmit the current schedule, but do not offer detailed descriptions.

There are broadcasters which do not pro-

vide any information at all.

2 Press »

« or »Λ« to select a television

channel.

– Today's programmes on the television

channel selected are displayed.

3 Switch to the information about the current

programme with »

«.

Notes:

You can open and switch off the extensive

programme information with »?«.

You can can added the selected broadcast

to the memory timer by pressing

»OK«

4 Press »

« to select information on the next

programme and, »

« to return to the infor-

mation for the current programme.

5 Select programmes on over the coming days

with »yy« (green), and switch back to the current day with »y« (red).

6 Switch back to the channel selection with

«.

Note:

Filter for certain programmes with »

yyyy

(blue), select the channel type with »

«,

«, »V« or »Λ« and press

»OK«

to confirm. Programmes which match the selected channel type are displayed.

7 Quit the electronic TV guide with »MENU«.

ENGLISH

TELEVISION - OPERATION

--------------------------------------------------------------------------------

Changing the picture format

The television automatically switches to the 16:9 format if this format is detected via the SCART socket.

1 Open the Tools menu with »TOOLS«.

2 Select the menu item »Picture Format« with

« or »Λ« and press

»OK«

to confirm.

3 Select the picture format with »

« or »>« and

press

»OK«

to confirm.

– You can choose between the following

picture formats:

»Auto« format

The picture format is automatically switched to »16:9« for 16:9 programmes.

The picture format is automatically switched to »4:3« for 4:3 programmes.

»16:9« and »14:9« formats

For programmes in 4:3 format, the picture is stretched horizontally if the »16:9« format or »14:9« format is selected.

The picture geometry is stretched horizontally.

With actual 16:9 input sources (from a settop box on the SCART socket) the picture fills the screen completely and with the correct geometry.

»4:3« format

The picture is shown in 4:3 format.

»LetterBox« format

The letterbox format is especially suitable for programmes in 16:9 format.

The black borders which are usually at the top and bottom of the screen are eliminated, 4:3 pictures fill the screen.

The transmitted pictures are enlarged, but are slightly cropped at the top and bottom. The picture geometry remains unchanged.

»Subtitle« format

If you cannot see the subtitles at the bottom of the screen, select »Subtitle«.

»Panorama« format

This setting is suitable for films in an especially wide format.

During programmes in 4:3 format, the picture is stretched horizontally if the »Panorama« function is selected. The picture geometry is stretched horizontally.

»Overscan off« format

In this mode, HD pictures are not cropped by the HDMI sockets or component sockets, and are displayed in their original size. This only applies in HDMI mode and for resolutions of 720p or above.

ENGLISH

SMART INTER@CTIVE TV AND HOME NETWORK

What is Smart Inter@ctive TV

Smart Inter@ctive TV provides your television with internet services and pages when con- nected to internet.

Through Interactive TV feature you can run many local and global internet applications. These applications include video, picture and music applications, social networks, news and sports, weather applications and doctor or pharmacy search, recipes and viewing traffic congestions depending on your local city.

Also, you can listen to online radio.

You r TV supports remote control feature for Apple iPhones and Android phones. Depending on the features of your TV, you may control your TV by your phone after downloading the free »GRUNDIG TV Remote« application from Apple App. Store or Android Market and install it on the Apple iPhone/Android phone.

The availability of the applications and the con- tent is dependent on the content provider.

Network connection

You can establish a wired or wireless connection between your television and the local network.

If you want use a wired network connection, start with the instructions on this page;

if you use a wireless network connection, follow the instructions in section "Wireless network", on page 32.

Wired network

Wired network connection

1 Connect the output of external modem to the

»LAN« socket with Cat 5 cable.

Note:

Connection cables are not supplied.

ENGLISH

Wired network settings

There are two ways of making the wired network settings.

A Automatic wired network connection,

all connection settings (»IP Address«, »Net-

mask«, »Gateway« and »DNS«) are ob- tained from modem automatically.

B Manual wired network connection,

all connection settings (»IP Address«, »Net-

mask«, »Gateway« and »DNS«) must be configured manually.

Automatic wired network connection

Most of the home networks are Dynamic. If you have a dynamic network, you must use a DSL modem that supports DHCP. A Television connected to the same network with a Modem or IP sharer that support DHCP obtains the »DNS« values that are required for »IP Address«, »Netmask«, »Gateway« and internet access automatically, and thus you are not required to enter those values manually.

1 Open the menu with »MENU«.

2 Select the line »INTER@CTIVE TV« with »V«

or »

« and press

»OK«

to confirm.

– The »INTER@CTIVE TV« menu appears.

inter@ctive)Applications

Connection)Type

Wired

DNS

Netmask

Gateway

MAC)Address

10.134.150.8

255.255.255.0

10.134.151.254

E1:DF:BF:92:00:11

IP)Address

10.134.151.15

Exit

Back

INTER@CTIVE)TV

Network)Settings

dd.mm.yyyy

hh:mm

Connect

Test)Connection

Network)Configuration

AUTO

3 Select »Connection Type« with »V« or »Λ«

and then select »Wired« with »

« or »>«.

4 Select »Network Configuration« with »

« or

« and then select »AUTO« with »<« or »>«.

5 Start the registration to the home network by

pressing »y« (red).

– The mesage »Connecting ... Please Wait«

appears.

6 Press »yy« (green) to make sure that the

network connection is established with the current settings.

– The messages »Testing ... Please Wait«

appears, after successfull announcement the messages »Connecting To Gateway: Success« and »Internet Connection: Success«.

7 Press »MENU« to end the setting.

Note:

If you do not have a dynamic network, follow the instructions in manual connection section.

SMART INTER@CTIVE TV AND HOME NETWORK

ENGLISH

Manual connection

Certain networks require Static IP address. If your network requires a Static IP address, you must enter the »IP Address«, »Netmask«, »Gateway« and »DNS« values manually. You can obtain your »IP Address«, »Netmask«, »Gateway« and »DNS« values from your Internet Service Provider (ISP).

1 Open the menu with »MENU«.

2 Select the line »INTER@CTIVE TV« with »

or »

« and press

»OK«

to confirm.

– The »INTER@CTIVE TV« menu appears.

3 Select »Connection Type« with »

« or »Λ«

and then select »Wired« with »

« or »>«.

4 Select »Network Configuration« with »

« or

« and then select »Manual« with »<« or

«.

– »IP Address«, »Netmask«, »Gateway« and

»DNS« options are active.

inter@ctive)Applications

Connection)Type

Wired

DNS

Netmask

Gateway

MAC)Address

10.134.150.8

255.255.255.0

10.134.151.254

E1:DF:BF:92:00:11

IP)Address

10.134.151.15

Exit Back

INTER@CTIVE)TV

Network)Settings

dd.mm.yyyy

hh:mm

Connect

Test)Connection

Network)Configuration

Manual

5 Select »IP Address« with »V« and press

»OK«

. Enter the IP address with »1…0« and press »yy« (green) to save the value.

6 Select »DNS« with »

« and press

»OK«

. Enter the DNS address with »1…0« and press »yy« (green) to save the value.

SMART INTER@CTIVE TV AND HOME NETWORK

7 Select »Netmask« with »V« and press

»OK«

. Enter the Netmask with »1…0« and press »yy« (green) to save the value.

8 Select »Gateway« with »

« and press

»OK«

. Enter the Gateway with »1…0« and press »yy« (green) to save the value.

9 Start the registration to the home network by

pressing »y« (red).

– The mesage »Connecting ... Please Wait«

appears.

10 Press »yy« (green) to make sure that the

network connection is established with the current settings.

– The messages »Testing ... Please Wait«

appears, after successfull announcement the messages »Connecting To Gateway: Success« and »Internet Connection: Success«.

11 Press »MENU« to end the setting.

+ 134 hidden pages