P
ositionQty.Description
1 Price
Product No.: 96550066
Multistage, immersible, self-priming, centrifugal pump for vertical installation in tanks etc.
The pump has the following characteristics:
- Installation length according to DIN 5440.
- Impellers, intermediate chambers and shaft are made of Edelstahl.
- Mechanical shaft seal according to EN 12756.
- Power transmission via cast iron split coupling.
Note!
Product picture may differ from actual product
Single
on requestMTRE 64-2/2 A-F-A-HUUV
Price
The pump is fitted with an three-phase motor with frequency converter and PI-controller
integrated in the motor terminal box.
No additional motor protection is required as both motor and electronics are protected by
integrated overload and temperature protection.
External sensor can be connected if controlled pump operation based on for example flow,
pressure or temperature is required.
A control panel enables setting of required setpoint as well as setting of pump to MIN or
MAX operation or to STOP.
The control panel has indicator lights for "Operation" and "Fault".
Communication with the pump is possible by means of Grundfos R100 Remote Control
enabling further settings as well as reading out of a number of parameters such as "Actual
value", "Speed", "Power input" and total "Power consumption".
The terminal box holds terminals for the connection of:
- Pump start/stop (potential-free contact),
- external remote setpoint setting via analog signal, 0 - 5 V, 0 - 10 V, 0(4) - 20 mA,
- 5 V voltage supply for setpoint potentiometer, Imax = 5 mA,
- sensor, 0 - 5 V, 0 - 10 V, 0(4) - 20 mA,
- 24 V voltage supply for sensor, Imax = 40 mA,
- input for forced control to MIN, MAX, External fault or Flowswitch (potential-free
contact),
- potential-free fault signal relay with changeover contact, reporting Fault, Operation
or Ready,
- RS485 GENIbus.
Printed
from Grundfos CAPS
Immersion depth: 249 mmmm
Liquid:
Liquid temperature range: -10 .. 90 °C
Density: 1000 kg/m³
1/5
P
ositionQty.Description
Te
chnical:
Speed for pump data: 3000 rpm
Rated flow: 64 m³/h
Rated head: 29.2 m
Shaft seal: HUUV
Maximum operating pressure: 25 bar
Materials:
Pump head: Grauguss
Impeller: Edelstahl
Installation:
Maximum ambient temperature: 40 °C
Maximum operating pressure: 25 bar
Max pressure at stated temp: 25 bar / 90 °C
Flange standard: DIN
Pipe connection: DN 80
Pressure stage: PN 16
Flange size for motor: FF265
Electrical data:
Motor type: 132SB
Number of poles: 2
Rated power - P2: 7.5 kW
Power (P2) required by pump: 7.5 kW
Mains frequency: 50 Hz
Rated voltage: 3 x 380-480 V
Rated current: 14,8-11,6 A
Cos phi - power factor: 0,94-0,95
Rated speed: 480-3500 rpm
Enclosure class (IEC 34-5): 55
Insulation class (IEC 85): F
EN-GJL-200
ASTM 25B
DIN W.-Nr. 1.4301
AISI 304
Single
Price
Printed
from Grundfos CAPS
Others:
Label: Grundfos Blueflux
Net weight: 144 kg
Gross weight: 174 kg
Shipping volume: 0.34 m³
2/5
Loading...