Grundfos DMX 37-5, DMX 52-8, DMX 152-6, DMX 315-3, DMX 321-4 Installation And Operating Instructions Manual

...
Diaphragm Dosing Pump DMX model 226
DMX 24-8 DMX 142-8 DMX 280-8 DMX 37-5 DMX 152-6 DMX 315-3 DMX 52-8 DMX 160-5 DMX 321-4 DMX 60-3 DMX 190-8 DMX 321-6 DMX 67-10 DMX 190-10 DMX 380-3 DMX 82-5 DMX 199-8 DMX 460-3,5 DMX 95-8 DMX 224-5 DMX 460-6 DMX 100-8 DMX 249-3 DMX 525-3 DMX 130-3 DMX 255-3 DMX 765-3 DMX 132-10 DMX 280-6
Installation and Operating Instructions
EN
15.720017-V6.0
Read this manual completely and keep it! Subject to change.
DMX model 226
Denmark
GRUNDFOS DK A/S Martin Bachs Vej 3 DK-8850 Bjerringbro Tlf.: +45-87 50 50 50 Telefax: +45-87 50 51 51 E-mail: info_GDK@grundfos.com www.grundfos.com/DK
Argentina
Bombas GRUNDFOS de Argentina S.A. Ruta Panamericana km. 37.500 Lote 34A 1619 - Garin Pcia. de Buenos Aires Phone: +54-3327 414 444 Telefax: +54-3327 411 111
Australia
Grundfos Alldos Dosing & Disinfection ALLDOS Oceania Pty. Ltd. Unit 3 / 74 Murdoch Circuit Acacia Ridge QLD 4100 Phone: +61 (0)7 3712 6888 Telefax: +61 (0)7 3272 5188 E-mail: alldos.au@alldos.com
Australia
GRUNDFOS Pumps Pty. Ltd. P.O. Box 2040 Regency Park South Australia 5942 Phone: +61-8-8461-4611 Telefax: +61-8-8340 0155
Austria
GRUNDFOS Pumpen Vertrieb Ges.m.b.H. Grundfosstraße 2 A-5082 Grödig/Salzburg Tel.: +43-6246-883-0 Telefax: +43-6246-883-30
Belgium
N.V. GRUNDFOS Bellux S.A. Boomsesteenweg 81-83 B-2630 Aartselaar Tél.: +32-3-870 7300 Télécopie: +32-3-870 7301
Belorussia
Представительство ГРУНДФОС в Минске 220090 Минск ул.Олешева 14
Телеф он: (8632) 62-40-49 Факс: (8632) 62-40-49
Bosnia/Herzegovina
GRUNDFOS Sarajevo Paromlinska br. 16, BiH-71000 Sarajevo Phone: +387 33 713290 Telefax: +387 33 231795
Brazil
GRUNDFOS do Brasil Ltda. Rua Tomazina 106 CEP 83325 - 040 Pinhais - PR Phone: +55-41 668 3555 Telefax: +55-41 668 3554
Bulgaria
GRUNDFOS Pumpen Vertrieb Representative Office - Bulgaria Bulgaria, 1421 Sofia Lozenetz District 105-107 Arsenalski blvd. Phone: +359 2963 3820, 2963 5653 Telefax: +359 2963 1305
Canada
GRUNDFOS Canada Inc. 2941 Brighton Road Oakville, Ontario L6H 6C9 Phone: +1-905 829 9533 Telefax: +1-905 829 9512
China
Grundfos Alldos Dosing & Disinfection ALLDOS (Shanghai) Water Technology Co. Ltd. West Unit, 1 Floor, No. 2 Building (T 4-2) 278 Jinhu Road, Jin Qiao Export Process­ing Zone Pudong New Area Shanghai, 201206 Phone: +86 21 5055 1012 Telefax: +86 21 5032 0596 E-mail: alldos.cn@alldos.com
China
GRUNDFOS Pumps (Shanghai) Co. Ltd. 22 Floor, Xin Hua Lian Building 755-775 Huai Hai Rd, (M) Shanghai 200020 PRC Phone: +86-512-67 61 11 80 Telefax: +86-512-67 61 81 67
Croatia
GRUNDFOS predstavništvo Zagreb Cebini 37, Buzin HR-10000 Zagreb Phone: +385 1 6595 400 Telefax: +385 1 6595 499
Czech Republic
GRUNDFOS s.r.o. Čapkovského 21 779 00 Olomouc Phone: +420-585-716 111 Telefax: +420-585-716 299
Estonia
GRUNDFOS Pumps Eesti OÜ Peterburi tee 44 11415 Tallinn Tel: + 372 606 1690 Fax: + 372 606 1691
Finland
OY GRUNDFOS Pumput AB Mestarintie 11 FIN-01730 Vantaa Phone: +358-3066 5650 Telefax: +358-3066 56550
France
Grundfos Alldos Dosing & Disinfection ALLDOS S.A.R.L. 7, rue Gutenberg F-67610 La Wantzenau Tél.: +33-3 88 59 26 26 Télécopie: +33-3 88 59 26 00 E-mail : alldos.fr@alldos.com
France
Pompes GRUNDFOS Distribution S.A. Parc d’Activités de Chesnes 57, rue de Malacombe F-38290 St. Quentin Fallavier (Lyon) Tél.: +33-4 74 82 15 15 Télécopie: +33-4 74 94 10 51
Germany
Grundfos Alldos Dosing & Disinfection ALLDOS Eichler GmbH Reetzstraße 85 D-76327 Pfinztal (Söllingen) Tel.: +49 7240 61-0 Telefax: +49 7240 61-177 E-mail: alldos.de@alldos.com
Germany
GRUNDFOS GMBH Schlüterstr. 33 D-40699 Erkrath Tel.: +49-(0) 211 929 69-0 Telefax: +49-(0) 211 929 69-3799 E-mail: infoservice@grundfos.de Service in Deutschland: E-mail: kundendienst@grundfos.de
Greece
GRUNDFOS Hellas A.E.B.E. 20th km. Athinon-Markopoulou Av. P. O . Box 71 GR-19002 Peania Phone: +0030-210-66 83 400 Telefax: +0030-210-66 46 273
Hong Kong
GRUNDFOS Pumps (Hong Kong) Ltd. Unit 1, Ground floor Siu Wai Industrial Centre 29-33 Wing Hong Street & 68 King Lam Street, Cheung Sha Wan Kowloon Phone: +852-27861706 / 27861741 Telefax: +852-27858664
Hungary
GRUNDFOS Hungária Kft. Park u. 8 H-2045 Törökbálint, Phone: +36-23 511 110 Telefax: +36-23 511 111
India
GRUNDFOS Pumps India Private Limited 118 Old Mahabalipuram Road Thoraipakkam Chamiers Road Chennai 600 096 Phone: +91-44 2496 6800
Indonesia
PT GRUNDFOS Pompa Jl. Rawa Sumur III, Blok III / C C-1 Kawasan Industri, Pulogadung Jakarta 13930 Phone: +62-21-460 6909 Telefax: +62-21-460 6910 / 460 6901
Ireland
GRUNDFOS (Ireland) Ltd. Unit A, Merrywell Business Park Ballymount Road Lower Dublin 12 Phone: +353-1-4089 800 Telefax: +353-1-4089 830
Italy
GRUNDFOS Pompe Italia S.r.l. Via Gran Sasso 4 I-20060 Truccazzano (Milano) Tel.: +39-02-95838112 Telefax: +39-02-95309290 / 95838461
Japan
GRUNDFOS Pumps K.K. 1-2-3, Shin Miyakoda Hamamatsu City Shizuoka pref. 431-21 Phone: +81-53-428 4760 Telefax: +81-53-484 1014
2
15.720017-V6.0
DMX model 226
Korea
GRUNDFOS Pumps Korea Ltd. 6th Floor, Aju Building 679-5 Yeoksam-dong, Kangnam-ku, 135-916 Seoul, Korea Phone: +82-2-5317 600 Telefax: +82-2-5633 725
Latvia
SIA GRUNDFOS Pumps Latvia Deglava biznesa centrs Augusta Deglava ielā 60, LV-1035, Rīga, Tālr.: + 371 714 9640, 7 149 641 Fakss: + 371 914 9646
Lithuania
GRUNDFOS Pumps UAB Smolensko g. 6 LT-03201 Vilnius Tel: + 370 52 395 430 Fax: + 370 52 395 431
Malaysia
GRUNDFOS Pumps Sdn. Bhd. 7 Jalan Peguam U1/25 Glenmarie Industrial Park 40150 Shah Alam Selangor Phone: +60-3-5569 2922 Telefax: +60-3-5569 2866
México
Bombas GRUNDFOS de México S.A. de C.V. Boulevard TLC No. 15 Parque Industrial Stiva Aeropuerto Apodaca, N.L. 66600 Phone: +52-81-8144 4000 Telefax: +52-81-8144 4010
Netherlands
Grundfos Alldos Dosing & Disinfection ALLDOS BV Leerlooiersstraat 6 NL-8601 WK Sneek Tel.: +31-51 54 25 789 Telefax: +31-51 54 30 550 E-mail: alldos.nl@alldos.com
Netherlands
GRUNDFOS Nederland B.V. Postbus 104 NL-1380 AC Weesp Tel.: +31-294-492 211 Telefax: +31-294-492244/492299
New Zealand
GRUNDFOS Pumps NZ Ltd. 17 Beatrice Tinsley Crescent North Harbour Industrial Estate Albany, Auckland Phone: +64-9-415 3240 Telefax: +64-9-415 3250
Norway
GRUNDFOS Pumper A/S Strømsveien 344 Postboks 235, Leirdal N-1011 Oslo Tlf.: +47-22 90 47 00 Telefax: +47-22 32 21 50
Poland
GRUNDFOS Pompy Sp. z o.o. ul. Klonowa 23 Baranowo k. Poznania PL-62-081 Przeźmierowo Phone: (+48-61) 650 13 00 Telefax: (+48-61) 650 13 50
Portugal
Bombas GRUNDFOS Portugal, S.A. Rua Calvet de Magalhães, 241 Apartado 1079 P-2770-153 Paço de Arcos Tel.: +351-21-440 76 00 Telefax: +351-21-440 76 90
România
GRUNDFOS Pompe România SRL Bd. Biruintei, nr 103 Pantelimon county Ilfov Phone: +40 21 200 4100 Telefax: +40 21 200 4101 E-mail: romania@grundfos.ro
Russia
ООО Грундф ос Росси я, 109544 Москва, Школьная 39 Тел. (+7) 095 737 30 00, 564 88 00 Факс (+7) 095 737 75 36, 564 88 11
E-mail grundfos.moscow@grundfos.com
Serbia
GRUNDFOS Predstavništvo Beograd Dr. Milutina Ivkovića 2a/29 YU-11000 Beograd Phone: +381 11 26 47 877 / 11 26 47 496 Telefax: +381 11 26 48 340
Singapore
GRUNDFOS (Singapore) Pte. Ltd. 24 Tuas West Road Jurong Town Singapore 638381 Phone: +65-6865 1222 Telefax: +65-6861 8402
Slovenia
GRUNDFOS PUMPEN VERTRIEB Ges.m.b.H., Podružnica Ljubljana Blatnica 1, SI-1236 Trzin Phone: +386 1 563 5338 Telefax: +386 1 563 2098 E-mail: slovenia@grundfos.si
South Africa
Grundfos Alldos Dosing & Disinfection ALLDOS (Pty) LTD 98 Matroosberg Road, Waterkloof Park P.O. Box 36505, Menlo Park 0102 0181 ZA Pretoria E-mail: alldos.za@alldos.com
Spain
Bombas GRUNDFOS España S.A. Camino de la Fuentecilla, s/n E-28110 Algete (Madrid) Tel.: +34-91-848 8800 Telefax: +34-91-628 0465
Sweden
GRUNDFOS AB Lunnagårdsgatan 6 431 90 Mölndal Tel.: +46-0771-32 23 00 Telefax: +46-31 331 94 60
Switzerland
Grundfos Alldos Dosing & Disinfection ALLDOS International AG Schönmattstraße 4 CH-4153 Reinach Tel.: +41-61-717 5555 Telefax: +41-61-717 5500 E-mail: alldos.ch@alldos.com
Switzerland
GRUNDFOS Pumpen AG Bruggacherstrasse 10 CH-8117 Fällanden/ZH Tel.: +41-1-806 8111 Telefax: +41-1-806 8115
Taiwan
GRUNDFOS Pumps (Taiwan) Ltd. 7 Floor, 219 Min-Chuan Road Taichung, Taiwan, R.O.C. Phone: +886-4-2305 0868 Telefax: +886-4-2305 0878
Thailand
GRUNDFOS (Thailand) Ltd. 947/168 Moo 12, Bangna-Trad Rd., K.M. 3, Bangna, Phrakanong Bangkok 10260 Phone: +66-2-744 1785 ... 91 Telefax: +66-2-744 1775 ... 6
Turkey
GRUNDFOS POMPA San. ve Tic. Ltd. Sti. Gebze Organize Sanayi Bölgesi Ihsan dede Caddesi,
2. yol 200. Sokak No. 204 41490 Gebze/ Kocaeli Phone: +90 - 262-679 7979 Telefax: +90 - 262-679 7905 E-mail: satis@grundfos.com
Ukraine
ТОВ ГРУНДФОС Украина ул. Владимирская, 71, оф. 45 г. Киев, 01033, Украи на, Тел. +380 44 289 4050 Факс +380 44 289 4139
United Arab Emirates
GRUNDFOS Gulf Distribution P.O. Box 16768 Jebel Ali Free Zone Dubai Phone: +971-4- 8815 166 Telefax: +971-4-8815 136
United Kingdom
Grundfos Alldos Dosing & Disinfection ALLDOS Ltd. 39 Gravelly Industrial Park, Tyburn Road Birmingham B24 8TG Phone: +44-121-3283336 Telefax: +44-121-3284332 E-mail: alldos.uk@alldos.c om
United Kingdom
GRUNDFOS Pumps Ltd. Grovebury Road Leighton Buzzard/Beds. LU7 8TL Phone: +44-1525-850000 Telefax: +44-1525-850011
U.S.A.
GRUNDFOS Pumps Corporation 17100 West 118th Terrace Olathe, Kansas 66061 Phone: +1-913-227-3400 Telefax: +1-913-227-3500
Usbekistan
Представительство ГРУНДФОС в Ташкенте 700000 Ташке нт ул.Усма на Носира 1-й тупик 5 Телефон: (3712) 55-68-15
Факс: (3712) 53-36-35
Addresses revised 15.01.2007
Adresses revised 7.04.2005
V6.0
3
Contents
DMX model 226 en
Installation Data ............................................................................................. 48
Installation Diagram ...................................................................................... 48
Type key ......................................................................................................... 49
1 Of General Interest .............................................................................. 50
1.1 In General .................................................................................................50
1.2 Using this Paper ....................................................................................... 50
1.3 Warranty ...................................................................................................50
2 Safety Instructions .............................................................................. 51
2.1 Application of the Product ......................................................................... 51
2.2 Obligations of the Operating Authority ......................................................51
2.3 Averting Dangers ...................................................................................... 51
3 Technical Data ..................................................................................... 52
3.1 Pump Types .............................................................................................. 52
3.2 Pump Performance ...................................................................................52
3.2.1 Accuracy ..........................................................................................52
3.2.2 Performance ..................................................................................53
3.3 Suction heights .........................................................................................54
3.3.1 Media with a viscosity similar to water ..........................................54
3.3.2 Suction heights for media with maximum permissible viscosity ....54
3.4 Dosing Curves ..........................................................................................55
3.5 Materials ...................................................................................................55
3.6 Ambient and Operating Conditions ........................................................... 55
3.7 Weight.......................................................................................................56
3.8 Dimensional Drawing ................................................................................ 57
4 Installation............................................................................................ 59
4.1 Installation Information.............................................................................. 59
4.2 Transport and Storage ..............................................................................61
4.3 Mounting ...................................................................................................61
4.4 Connecting the Suction and Pressure Lines.............................................61
4.5 Electrical Connections ..............................................................................62
4.5.1 Versions with mains plug............................................................... 62
4.5.2 Versions without mains plug.......................................................... 62
5 Commissioning.................................................................................... 63
5.1 Inspections before Commissioning ........................................................... 63
5.2 Commissioning .........................................................................................63
4
15.720017-V6.0
DMX model 226 en
6 Operation ............................................................................................. 64
6.1 Description of the Device..........................................................................64
6.2 Switching on / off ...................................................................................... 64
6.2.1 Switching on ..................................................................................64
6.2.2 Switching off ..................................................................................64
6.3 Adjusting the Dosing Flow by Means of the Stroke length........................65
6.4 Adjusting the Stroke Length Adjustment...................................................65
6.5 Possible Failures ....................................................................................... 66
7 Operation with Other Electronics....................................................... 67
7.1 Electronics Version Stroke sensor ............................................................67
7.2 Electronics Diaphragm Breakage Sensor ................................................. 67
7.2.1 Technical Data of the Electronics ..................................................67
7.2.2 Dimensional Drawing (Electronics Enclosure)...............................67
7.2.3 Function.........................................................................................68
7.2.4 Electrical Connections of the Electronics ......................................68
7.2.5 Relay Outputs ................................................................................ 69
7.2.6 Screwing the Sensor into the Dosing Head...................................69
7.2.7 Commissioning ..............................................................................70
7.2.8 Using the Contacts ........................................................................70
7.2.9 Description of the Device .............................................................. 70
7.2.10 Maintenance..................................................................................71
8 Integral Overflow Valve ....................................................................... 72
8.1 Function ....................................................................................................72
8.2 Permissible Media ....................................................................................72
8.3 Connections .............................................................................................. 72
8.4 Setting of Opening Pressure.....................................................................73
8.4.1 General .......................................................................................... 73
8.4.2 Setting Instructions for Opening Pressure.....................................73
8.5 Venting ......................................................................................................74
8.6 Possible Faults .......................................................................................... 74
8.7 Maintenance .............................................................................................74
8.7.1 Intervals for Cleaning and Maintenance ........................................ 74
8.7.2 Replacing the Diaphragm ..............................................................74
9 Maintenance ......................................................................................... 75
9.1 Replacing the Gear Grease ......................................................................75
9.2 Rates for cleaning and maintenance ........................................................75
9.3 Cleaning the Suction and Pressure Valves ............................................... 75
9.4 Exchanging the Diaphragm ...................................................................... 76
A. Appendix Dosing Curves .................................................................. 198
V6.0
5
Installation Data
Grundfos customer No.:
Order No. of device:
Serial number of device:
Put into service on:
Location of device:
DMX model 226 en
NOTE Please fill in this form following commissioning. It will
help you and your Grundfos servicing partner to adjust the device during subsequent corrections.
Owner:
Contract No.:
Used for:
Installation Diagram
6
15.720017-V6.0
DMX model 226 en
Type key
(Cannot be used for pump configuration.)
Example: DME 2-18 A-PP/E/C-F-3 1 1E F
Pump range D ME...
Maximum pressure [bar] Control variant Code
Standard A Standard + alarm relay AR Standard + ProfIbus AP Standard + GENIbus AG
Dosing head material Code
Polypropylene PP PVDF PV Stainless steel 1.4401 SS
Gasket material Code
EPDM E FKM V
Valve ball material Code
Ceramics C Stainless steel 1.4401 SS
Control panel Code
Front-fitted F Side-fitted S
Voltage Code
1 x 100-240 V, 50-60 Hz 3
Code Mains plug
F EU (Schuko) B USA, CAN GUK IAU ECH JJP
Code Connection,
suction/ discharge
1 Tubing 6/9
Tubing 4/6 supplied with the pump
2 Tubing 6/9
Tubing 6/12+ 9/12
supplied with the pum 3 Tubing 4/6 4 Tubing 6/9 5 Tubing 6/12 6 Tubing 9/12 A Threaded Rp 1/4 B Threaded Rp 3/8 E Cementing d.10 F Cem enting d. 12
Code Valves
1 Standard valve 2 Spring- loaded valve
V6.0
7
1 Of General Interest
1.1 In General
1.2 Using this Paper
DMX model 226 en
This operation manual contains all information for safe operation of the described product.
If you require further information or if any problems arise which are not reflected in detail in this manual, contact Grundfos directly for the information needed.
Descriptions are written as plain text.Lists are indicated by squares (), sublists by dashes (-).Operation steps are indicated by bullets (), substeps by small bullets (•).Cross-references are indicated by The headings
WARNING Danger of injuries and accidents!
WARNING, CAUTION
italic letters
and
NOTE
and an arrow ().
have the following meaning:
!
1.3 Warranty
CAUTION Danger of incorrect operation or damage to the product!
NOTE There is an exceptional feature.
Warranty in accordance with our general terms of sale and delivery shall only be valid, if
the product is used according to the information within this paper,the product is not being opened or used improperly,maintenance and repair is implemented exclusively by authorized and
qualified personnel,
original spare parts are used for repairs.
8
15.720017-V6.0
DMX model 226 en
2 Safety Instructions
2.1 Application of the Product
!
!
The dosing pump described here is suitable for dosing liquid, non-abrasive and non­inflammable media strictly complying with the instructions of this manual.
WARNING Other applications are not intended and are not
permitted. Grundfos accept no responsibility for damages caused by unintended use.
NOTE Explosion-proof pumps are indicated on the pump type
identification label as well as on the motor type identification label. The enclosed declaration of conformity with the 94/9/EC guideline will replace the declaration of EC conformity incorporated in this instructions manual.
WARNING For the use of a pump indicated as explosion-proof for
operation in potentially explosive operating places according to guideline 94/9/EC, please follow the enclosed instructions "Operating an explosion-proof pump" in addition to this instructions manual.
2.2 Obligations of the Operating Authority
The operating authority of the plant is responsible for
instructing the operation personnelarranging regular maintenance
2.3 Averting Dangers
WARNING When dosing dangerous media, observe the
!
CAUTION Adjust the stroke length only while the pump is
corresponding safety precautions!
Wear protective gloves and glasses when executing work at the dosing head, connections or lines!
Only use the prescribed line types!
Do not open the pump! Repair only by authorized personnel!
running! Danger of damages.
V6.0
9
3 Technical Data
p
p
3.1 Pump Types
DMX model 226 en
Order No.
Simple pum
Double pum DMX 24-8 DMX 24-8/24-8 DMX 52-8 DMX 52-8/25-8
DMX 100-8 DMX 100-8/ 100-8 DMX 142-8 DMX 142-8/ 142-8
DMX 37-5 DMX 37-5/37-5 DMX 82-5 DMX 82-5/82-5
DMX 160-5 DMX 160-5/ 160-5 DMX 224-5 DMX 224-5/ 224-5
DMX 60-3 DMX 60-3/60-3
DMX 130-3 DMX 130-3/ 130-3 DMX 255-3 DMX 255-3/ 255-3 DMX 380-3 DMX 380-3/ 380-3
DMX 67-10 DMX 67-10/67-10 DMX 132-10 DMX 132-10/132-10 DMX 190-10 DMX 190-10/190-10
DMX 190-8 DMX 190-8/ 190-8
DMX 95-8 DMX 95-8/95-8 DMX 199-8 DMX 199-8/ 199-8 DMX 280-8 DMX 280-8/ 280-8 DMX 280-6 DMX 280-6/ 260-6 DMX 152-6 DMX 152-6/ 152-6 DMX 321-6 DMX 321-6/ 321-6 DMX 321-4 DMX 321-4/ 321-4 DMX 460-6 DMX 460-6/ 460-6
DMX 460-3,5 D M X 460 -3 , 5 / 46 0-3,5
DMX 249-3 DMX 249-3/ 249-3 DMX 315-3 DMX 315-3/ 315-3 DMX 525-3 DMX 525-3/ 525-3 DMX 765-3 DMX 765-3/ 765-3
Dosing
head size
Motor
1
222
0,18kW
Stroke
volume
[ml]
13,8
336
1
18,5
227,8
0,37kW *
344,6
473
* with PTC thermistor: 0,55 kW
3.2 Pump Performance
3.2.1 Accuracy
Dosing flow fluctuation
Linearity deviation
10
< ± 1.5 % within the control range 1:10 ± 4 % of full-scale value within control range 1:5, direction of adjustment from maximum to minimum stroke length These data refer to:
- dosing medium water
- fully deaerated dosing head
- measurement according to ALLDOS factory standard No. 0010/0011
- standard version of pump
15.720017-V6.0
DMX model 226 en
3.2.2 Performance
The data in the following table refer to:
- maximum counterpressure
- dosing medium water
- flooded suction 0.5 m w. c.
- fully deaerated dosing head
- three-phase 400 V motor
50 Hz 60 Hz 100 Hz
Stroke
value [H/min]
3 AC 1 AC 3 AC 1 AC
Q [l/h]
Stroke
value [H/min]
p max * [bar]p max * [bar]
Q [l/h]
Stroke
value [H/min]
p max * [bar]
Simple pump
Dosing head
size
Q [l/h]
DMX 24-8 24 29 28 34,8 48 58
-
88
-
-
DMX 52-8 DMX 100-8 DMX 142-8
188
52 63 62 75,6 104 126 100 120 120 144 142 168
DMX 37-5 37 29 45 34,8 75 58
5
DMX 82-5
DMX 160-5
255
DMX 224-5 224 168
DMX 60-3 DMX 130-3 DMX 255-3
333
DMX 380-3 380 168 DMX 67-10
DMX 132-10 DMX 190-10 190 175 -
1
DMX 190-8
DMX 95-8 DMX 199-8 199 120 239 144 DMX 280-8
2
DMX 280-6 DMX 152-6 DMX 321-6 321 120 - 385 144 - DMX 321-4
3
DMX 460-6
DMX 460-3,5 460 175 - 3,5
DMX 249-3 DMX 315-3 DMX 525-3
43
DMX 765-3 765 175 -
Double pump
Dosing head
size
DMX 24-8/24-8 DMX 52-8/25-8
DMX 100-8/100-8 200 120 240 144
188
DMX 142-8/142-8 284 168
DMX 37-5/37-5 DMX 82-5/82-5
DMX 160-5/160-5 320 120 384 144
255
DMX 224-5/224-5
DMX 60-3/60-3
DMX 130-3/130-3 260 63 312 75,6 520 126 DMX 255-3/255-3 510 120 612 144
333
DMX 380-3/380-3 DMX 67-10/67-10 134 57 161 68,4 268 114 10
DMX 132-10/132-10 264 120 317 144 DMX 190-10/190-10
1
DMX 190-8/190-8
DMX 95-8/95-8 190 57 228 68,4 380 114 8
DMX 199-8/199-8 DMX 280-8/280-8
2
DMX 280-6/260-6 560 175 - 6 DMX 152-6/152-6 304 57 6 365 68,4 6 608 114 6 DMX 321-6/321-6 DMX 321-4/321-4
3
DMX 460-6/460-6 920 175 6 -
DMX 460-3,5/460-3,5
DMX 249-3/249-3 DMX 315-3/315-3 630 72 756 86,4 1260 144 DMX 525-3/525-3 1050 120 1260 144
4
DMX 765-3/765-3
82 63 98 75,6 164 126
160 120 192 144
--
60 29 72 34,8 120 58 130 63 156 75,6 260 126 255 120 306 144
--
67 57 80 68,4 134 114 10 132 120 158 144
10 10 10
10
--
190 175 - 8
95 57 114 68,4 190 114 8
888
8 280 175 ­280 175 - 6 152 57 6 182 68,4 6 304 114 6
66
-
-
-
321 120 - 4 385 144 - 4 460 175 6 -
--
-
249 57 299 68,4 498 114 315 72 378 86,4 630 144
333
525 120 630 144
--
60 Hz
Stroke
value [H/min]
Q [l/h]
50 Hz
Stroke
value [H/min]
p max * [bar]
3 AC 1 AC 3 AC 1 AC
Q [l/h]
48 29 56 34,8 96 58
104 63 125 75,6 208 126
--
74 29 90 34,8 148 58
164 63 197 75,6 328 126
448 168
-
120 29 144 34,8 240 58
760 168
10 10 10
10 380 175 ­380 175 - 8
88
398 120 478 144
8
560 175 -
--
--
-
--
-
304 120 - 365 144 -
6
642 120 - 4 770 144 - 4
--
920 175 - 3,5
--
498 57 598 68,4 996 114
333
3
1530 175 -
--
5
33
p max * [bar]
88
55
33
8
6
Q [l/h]
100 Hz
Stroke
value [H/min]
-
-
-
-
-
-
-
-
-
-
-
p max * [bar]
-
-
-
-
-
-
-
-
-
-
-
8
5
3
3
8
5
3
3
*) maximum counterpressure
V6.0
11
3.3 Suction heights
5
5
3.3.1 Media with a viscosity similar to water
Simple
pump
DMX 24-8 DMX 24-8/24-8
DMX 52-8 DMX 52-8/25-8 DMX 100-8 DMX 100-8/100-8 DMX 142-8 DMX 142-8/142-8
DMX 37-5 DMX 37-5/37-
DMX 82-5 DMX 82-5/82­DMX 160-5 DMX 160-5/160-5 DMX 224-5 DMX 224-5/224-5
DMX 60-3 DMX 60-3/60-3 DMX 130-3 DMX 130-3/130-3 DMX 255-3 DMX 255-3/255-3 DMX 380-3 DMX 380-3/380-3
DMX 67-10 DMX 67-10/67-10
DMX 132-10 DMX 132-10/132-10 DMX 190-10 DMX 190-10/190-10
DMX 190-8 DMX 190-8/190-8
DMX 95-8 DMX 95-8/95-8 DMX 199-8 DMX 199-8/199-8 DMX 280-8 DMX 280-8/280-8 DMX 280-6 DMX 280-6/260-6 DMX 152-6 DMX 152-6/152-6 DMX 321-6 DMX 321-6/321-6 DMX 321-4 DMX 321-4/321-4 DMX 460-6 DMX 460-6/460-6
DMX 460-3,5 DMX 460-3,5/460-3,5
DMX 249-3 DMX 249-3/249-3 DMX 315-3 DMX 315-3/315-3 DMX 525-3 DMX 525-3/525-3 DMX 765-3 DMX 765-3/765-3
Data in m w. c. these data refer to:
- counterpressure 1.5 to 3 bar
- not degassing and not abrasive media
- temperature of 20 °C
- stroke length 100%
- standard version
Double
pump
Dosing head
Suction
size
height *
1 3 m 1 m 4 m
23 m1 m
13 m1 m
23 m1 m
32 m1 m
1,5 m 1 m 1 m 0,5 m
4
1,5 m 1 m
1 m 0,5 m 0 m 0 m
DMX model 226 en
50 Hz
suction lift **
60 Hz
Suction height *
2,5 m
-
2,5 m 1 m
-
2 m 1 m
-
2,5 m 1 m
-
2,5 m 1 m
-
2 m 1 m
-
1 m 0,5 m
-
suction lift **
1 m
100 Hz
Suction height *
suction lift **
2,5 m 1 m
--
2 m
1,5 m
2,5 m 1 m
2 m 1 m
1,5 m 1 m
1 m
--
1 m
--
-
--
--
--
-
Max. suction
line le ng th
3 m
3 m32 m1 m
4 m
3 m
3 m
2 m
*) suction line and dosing head filled (continuous operation) With version S 01 (stronger restoring spring), the values for dosing head size 1 are increased by 2 m, and for dosing head sizes 2 and 3 by 1 m. **) suction line and dosing head not filled, but dosing head and valves moistened (commissioning)
3.3.2 Suction heights for media with maximum permissible viscosity
Simple
pump
Double
pump
Dosing head
size
Stroke
value
[1/min]
Viscosity
[mPas]
DMX 24-8 DMX 24-8/24-8 29 1000 DMX 52-8 DMX 52-8/25-8 63
DMX 100-8 DMX 100-8/100-8 120
1
DMX 142-8 DMX 142-8/142-8 168
DMX 37-5 DMX 37-5/37-5 29 DMX 82-5 DMX 82-5/82-5 63
DMX 160-5 DMX 160-5/160-5 120
2
DMX 224-5 DMX 224-5/224-5 168
DMX 60-3 DMX 60-3/60-3 DMX 130-3 DMX 130-3/130-3 DMX 255-3 DMX 255-3/255-3
3
DMX 380-3 DMX 380-3/380-3 DMX 67-10 DMX 67-10/67-10
DMX 132-10 DMX 132-10/132-10 120 DMX 190-10 DMX 190-10/190-10
1
DMX 190-8 DMX 190-8/190-8
DMX 95-8 DMX 95-8/95-8 DMX 199-8 DMX 199-8/199-8 DMX 280-8 DMX 280-8/280-8
2
DMX 280-6 DMX 280-6/260-6
29 500
63 400 120 100 168 50
57 700
175
57 500 1 120 200
175 150
DMX 152-6 DMX 152-6/152-6 57 DMX 321-6 DMX 321-6/321-6 DMX 321-4 DMX 321-4/321-4 DMX 460-6 DMX 460-6/460-6
DMX 460-3,5 DMX 460-3,5/460-3,5
30
120 100
175 50
DMX 249-3 DMX 249-3/249-3 57 DMX 315-3 DMX 315-3/315-3 72 DMX 525-3 DMX 525-3/525-3 120
4
DMX 765-3 DMX 765-3/765-3 175
700 400 200 0 600 500 200 150
400 200 0
400
100 100
Suction height
50 10
[m water
gauge]
1
1
0
0
1
0
0
These data refer to:
- Newtonian liquids
- not degassing and not abrasive media
- temperature of 20 °C
- standard version
12
15.720017-V6.0
DMX model 226 en
3.4 Dosing Curves
The dosing curves shown here are trend curves according to the ALLDOS factory standard No. 0010/0011
They refer to: Performance of single pump
(the flow rate is doubled for the double pump)
Water as the dosing mediumZero point of pump QStandard version of pump
3.5 Materials
Pump
Pump housing
Diaphragm flanges
Adjustment knob, front panel
Al 226 GG 25 ABS
3.6 Ambient and Operating Conditions
for specified pressure - see diagram.
0
Admissible ambient temperature
Admissible storage temperature
Admissible humidity
!
Noise level
Minimum counterpressure
Admissible temperature of dosing liquids
0 °C to +40 °C
-20 °C to + 70 °C rel. humidity: 70% at 40 °C, 90% at 35 °C
CAUTION Danger of malfunctioning or damage!
Do not install outdoors!
WARNING Risk of hot surfaces! Pumps with A.C. motors can
become hot. Allow a minimum spacing of 100 mm to the ventilator cowl!
± 55 dB (A), testing following DIN 45635-01-KL3 1 bar
These data refer to the pressure valve of the pump. Pressure losses along the way to the injection point inclusively are not taken into account.
Materials up to 10 bar
PVC
1.4571 PP
PVDF
1)
0 °C - 40 °C
-10 °C - 70 °C 0 °C - 40 °C
-10 °C - 60 °C
(70 °C at 9 bar)
V6.0
1)
For SIP/CIP applications 145 °C are admissible for a short time (approx. 15 min) at < 2 bar .
CAUTION Observe freezing and boiling point of the medium!
13
p
p
V4A
p
V
3.7 Weight
DMX model 226 en
le pum
Sim
DMX 24-8 DMX 24-8/24-8
DMX 52-8 DMX 52-8/25-8 DMX 100- 8 DMX 100- 8 /100-8 DMX 142- 8 DMX 142- 8 /142-8
DMX 37-5 DMX 37-5/37-5
DMX 82-5 DMX 82-5/82-5 DMX 160- 5 DMX 160- 5 /160-5 DMX 224- 5 DMX 224- 5 /224-5
DMX 60-3 DMX 60-3/60-3 DMX 130- 3 DMX 130- 3 /130-3 DMX 255- 3 DMX 255- 3 /255-3 DMX 380- 3 DMX 380- 3 /380-3
DMX 67-1 0 DMX 67- 10 /67-10
DMX 132-10 DMX 132-10/132-10 DMX 190-10 DMX 190-10/190-10
DMX 190- 8 DMX 190- 8 /190-8
DMX 95-8 DMX 95-8/95-8 DMX 199- 8 DMX 199- 8 /199-8 DMX 280- 8 DMX 280- 8 /280-8 DMX 280- 6 DMX 280- 6 /260-6 DMX 152- 6 DMX 152- 6 /152-6 DMX 321- 6 DMX 321- 6 /321-6 DMX 321- 4 DMX 321- 4 /321-4 DMX 460- 6 DMX 460- 6 /460-6
DMX 460- 3,5 DMX 460- 3,5 / 460 -3, 5
DMX 249- 3 DMX 249- 3 /249-3 DMX 315- 3 DMX 315- 3 /315-3 DMX 525- 3 DMX 525- 3 /525-3 DMX 765- 3 DMX 765- 3 /765-3
Weight Weight
PVC
Approx. 15 kg Approx. 21 kg Approx. 24 kg Approx. 36 kg
Approx. 21 kg Approx. 30 kg Approx. 30 kg Approx. 48 kg
Double pum
PVC
4A
14
15.720017-V6.0
Loading...
+ 30 hidden pages