Grunbeck pureliQ:K, pureliQ:KD Operation Manual

We understand water.

Filter | Fine filter pureliQ:K, pureliQ:KD

Operation manual

Central Contact
Germany

Sales

Phone [phone]

Technical Service
Phone [phone]
Fax [phone]

Availability
Monday to Thursday
7:00 am – 6:00 pm

Friday
7:00 am – 4:00 pm

Your local point of contact: see
accompanying list of
representatives

Copyright
The manufacturer reserves the copyright to this manual. No part of
this manual may be reproduced in any way without the written
permission of Grünbeck Wasseraufbereitung GmbH, nor may any part
be processed, duplicated or disseminated using electronic systems.
Violations of the aforementioned requirements shall be subject to
compensation.

Subject to technical modifications.
© by Grünbeck Wasseraufbereitung GmbH

Translation of the original operation manual
Edition of the manual: May 2018
Order no.: TD3-AK000en_035

Table of contents

3 | 44

-AK000

en_035

Table of contents

1 About this manual .......................... 4

1.1 Other applicable documents ........... 4

1.2 Target group ................................... 4

1.3 Storage of documents ..................... 4

1.4 Symbols used ................................. 4

1.5 Typographical conventions ............. 5

1.6 Validity of the manual ..................... 6

1.7 Type plate ....................................... 7

2 Safety .............................................. 9

2.1 Safety measures ............................. 9

2.2 Technical safety instructions ......... 10

2.3 Regulations ................................... 11

2.4 Responsibilities of the specialist

installer ......................................... 11

2.5 Responsibilities of the owner-user 12

2.6 Safety information for the specific

system .......................................... 12

3 Product description ..................... 13

3.1 Intended use ................................. 13

3.2 Product components ..................... 14

3.3 Functional description ................... 15

4 Installation .................................... 16

4.1 Requirements for the installation

site ................................................ 16

4.2 Checking the scope of supply ....... 17

4.3 Installing the product ..................... 18

5 Start-up ......................................... 20

5.1 How to start up the product .......... 20

5.2 Setting the month display ............. 20

5.3 Setting pressure reducer (only

pureliQ:KD) ................................... 21

5.4 Handing over the operation manual

to the operator .............................. 22

6 Cleaning, inspection,

maintenance ................................. 23

6.1 Cleaning ....................................... 23

6.2 Intervals ........................................ 24

6.3 Inspection ..................................... 24

6.4 Maintenance ................................. 24

6.5 Consumables ................................ 27

6.6 Wearing parts ............................... 27

6.7 Service kits ................................... 28

6.8 Spare parts ................................... 30

7 Malfunction ................................... 31

8 Disposal ........................................ 32

9 Technical specifications ............. 33

9.1 Fine filter pureliQ:K ....................... 33

9.2 Fine filter pureliQ:KD .................... 35

10 Other information ......................... 37

10.1 Explanation of terminology ........... 37

11 Operation log ................................ 38

About this manual

4 | 44

-AK000

en_035

1 About this manual

1.1 Other applicable documents

The following documents also apply in the case of the fine filters
pureliQ:K und pureliQ:KD:

● The manuals of all accessories used shall apply.

1.2 Target group

This manual is intended for specialist installers and owners/users.

1.3 Storage of documents

Keep this manual and all other applicable documents, so that they
are available when needed. Make sure that your specialist
installer enters the proper start-up and six-monthly maintenance
in the operation log in chapter 11.

1.4 Symbols used

This symbol identifies instructions that you must comply with for
your personal safety.

This symbol identifies instructions that you must comply with in
order to avoid damage to property.

About this manual

5 | 44

-AK000

en_035

This symbol identifies important information about the product or
its handling.

This symbol identifies work that is only allowed to be carried out
by specialist installers. In Germany, the installation company
must be registered in an installation directory of a water supply
company acc. to §12(2) AVB Wasser V (German Ordinance on
General Conditions for the Supply of Water).

1.5 Typographical conventions

The following typographical conventions are used in this manual:

1.5.1 Instructions

Single-step instructions or instructions in which the sequence is
unimportant are indicated as follows:

► Action

Multi-step instructions in which the sequence must be complied
with are indicated as follows:

1. First action
a First step of the first action
b Second step of the first action

2. Second action

Results of an instruction are indicated as follows:

» Result

About this manual

6 | 44

-AK000

en_035

1.5.2 Lists

List symbols used:

● First list point (level 1)

• First bullet point (level 2)

• Second bullet point (level 2)

● Second list point (level 1)

1.6 Validity of the manual

This manual applies to the following products:

● Fine filter pureliQ:K

● Fine filter pureliQ:KD

About this manual

7 | 44

-AK000

en_035

1.7 Type plate

Type plate is located on the right side of the housing as seen from
the front.

Please specify the data shown on the type plate in order to speed
up the processing of your enquiries or orders. Please enter the
serial number below in order to have the necessary data handy
whenever necessary.

Item

Designation

Item

Designation

1

Observe operation manual

2

SVGW mark of conformity
(registered)

3

DVGW mark of conformity
(registered)

4

Nominal connection diameter
5

Nominal flow

6

Nominal pressure

7

Water temperature

8

Pore size

9

Product designation

10

QR code

11

Data matrix code

12

Order no.

13

Serial no.

● Product designation: Fine filter pureliQ:____

● Order number: 101 ___

2 3 4

5

6

7 8 9

11

10

1

12

13

About this manual

8 | 44

-AK000

en_035

● Serial no.: ________________

Safety

9 | 44

-AK000

en_035

2 Safety

WARNING: Contamination of drinking water due to incorrect

handling.

● Risk of infectious diseases.
► Have the installation, start-up and six-monthly

maintenance carried out by specialist installers only.

2.1 Safety measures

● Carefully read this manual before operating your product.

● Install the product in a frost-free room. Otherwise, the

system may suffer irreparable damage. The consequence
may be water damage.

● Only use genuine spare parts for maintenance or repair. If

unsuitable spare parts are used, the warranty for your
product will be void.

● Comply with the hygiene instructions in chapter 6. Failure

to comply can result in microbiological contamination of
your drinking water installation.

● Only have persons working on your system that have read

and understood the present manual and that are qualified
to do such work based on their vocational training.

● Only operate the product if all components are installed

properly.

● Safety devices must never be removed, bridged or

otherwise tampered with.

Safety

10 | 44

-AK000

en_035

2.2 Technical safety instructions

This manual contains instructions that you must comply with for
your personal safety as well as to avoid damage to property. The
information and instructions are highlighted by a warning triangle
and have the following structure:

CAUTION: Type and source of danger

● Possible consequences
► Measures for avoidance

The following signal words are defined depending on the degree
of danger, and can be used in this document:

● DANGER means that serious or fatal injuries will occur if
the corresponding precautionary measures are not taken.

● WARNING means that serious or fatal injuries may occur if
the corresponding precautionary measures are not taken.

● CAUTION means that minor injuries may occur if the
corresponding precautionary measures are not taken.

● NOTE (without a warning triangle) means that damage to
property may occur if the corresponding safety measures
are not taken.

Safety

11 | 44

-AK000

en_035

2.3 Regulations

When installing and starting up the system, amongst others,
comply with the following regulations and guidelines:

● Statutory regulations on environmental protection

● Provisions of the employers' liability insurance associations

● DIN EN 806 Specifications for installations inside buildings

conveying water for human consumption

● VDI 6023 Part 6

2.4 Responsibilities of the specialist installer

Comply with the following instructions to ensure the proper and
safe functioning of the product:

● Only perform activities described in this manual.

● Perform all activities in accordance with all applicable

standards and regulations.

● Brief the owner/user on the function and operation of the

product.

● Advise the owner/user of the maintenance of the product.

● Instruct the owner-user about possible dangers that can

arise during operation of the product.

Safety

12 | 44

-AK000

en_035

2.5 Responsibilities of the owner-user

Comply with the following instructions to ensure the proper and
safe functioning of the product:

● Arrange for a specialist installer to carry out installation,
start-up and maintenance.

● Have the product explained to you by the specialist
installer.

● Only perform activities described in this manual.

● Do not carry out any activities that are explicitly marked for

a specialist installer.

● Only use this product as intended.

● Make sure that the required inspection and maintenance

work is carried out.

● Keep this manual.

2.6 Safety information for the specific system

WARNING: If the intervals for inspection and replacement are

not observed, the filter element will become excessively dirty.

● Health risk due to contamination of the drinking water.
► Observe the intervals and recommendations for

inspection and replacement of the filter element.

Product description

13 | 44

-AK000

en_035

3 Product description

3.1 Intended use

● The fine filters pureliQ:K and pureliQ:KD are designed for

the filtration of drinking water.

● The fine filter pureliQ:KD with pressure reducer in addition

is suitable for the adjustment of the holding on the
withdrawal side.

● The filters can be used for positive pressure and negative

pressure applications. The adjustment of the after-pressure
on the withdrawal side, however, only works when applied
in the positive pressure range.

● The filters are not suitable for circulation water that is

treated with chemicals.

● They are neither suitable for oils, greases, solvents, soaps

and other lubricating media, nor for the separation of water­soluble substances.

● The fine filters pureliQ:K and pureliQ:KD are designed

according to DIN EN 13443-1, DIN 19628 and
DIN EN 1567 (only applies to the fine filter pureliQ:KD) and
are intended for installation in drinking water systems
according to DIN EN 806-2 (installation directly after the
water meter system).

● They protect the water pipes and connected water-carrying

system parts from disturbances and corrosion damage due
to undissolved impurities (particles) such as rust particles,
sand, etc.

Product description

14 | 44

-AK000

en_035

3.2 Product components

Item

Designation

Item

Designation

1

Water meter screw connection

2

Click connection flange

3

Pressure reducer handwheel

4

Month display

5

Pressure gauge

6

Support fabric

7

Filter element

8

Filter cylinder

9

Filter bell cover

10

Inspection window