Gruetzner Lubricus LUB-D1, Lubricus LUB-D2, Lubricus LUB-D3, Lubricus LUB-D4 User Manual

version 04/2013

User Guide

Lubricus Lubrication System

LUB-D1/LUB-D2/LUB-D3/LUB-D4

(24 VDC)

2

Content

General Information 3
Warning 3
Scope of Supply 3
Overview 3

General safety details 4
Intended use 4
Extent of warranty 4
General safety information 4

Transport and storage 6

Function /Principle 7
Communication Interface, Connector PIN assignment 7

Installation instruction/ Pulse signals details 8

Functional problems: error, message and problems 9

Service: replacement of cartridge 9

Technical Data 11
Recommended tube length 11

Mounting 12

Disposal 12

3

General Information

Thank you very much deciding to use Lubricus Lubrication System. Make sure that you familiarize yourself with the safety
instructions of Lubricus Lubrication System and the accessories supplied with this unit. This manual contains important
safety information.

The Lubricus Lubrication System is a very compact lubrication pump for oil and grease up to NLGI 2. The pump requires 24
VDC power supply. The lubricant reservoir (400 cm³) is contained in cartridge. Supply pressure is up to 70 bar (1,000 psi).
The Lubricus Lubrication System Type D is available with up to 4 outlets.

Warning

Lubricus Lubrication System is designed for use in normal industrial environment indoor as well as outdoor but is not suitable
for mounting on moving equipment for example trucks. Only use original Lubricus cartridge and original spare parts. None
original spare parts can destroy the Lubricus Lubrication System.

Scope of supply

Standard delivery includes:

- Lubricus Lubrication System

- Tube connector attaches to the outlet, suitable for flexible tube 6 x 4

- (Ø 6mm outside and Ø 4mm inside diameter),

- Operating Instructions

Overview

The setup of your - Lubricus Lubrication System is easy. This user manual will learn you the basic operation and
adjustments.

Important remark: unused outlets must remain open to avoid damage to the pump!

Ventilation Lock

Housing

Connection M12x1 external control

outlets

4

Attention!

General safety details

Everybody who is involved with the installation, start-up, maintenance and operation of the Lubricus Lubrication System must
read these instructions carefully!

Use in accordance with guide

Lubricus Lubrication System is only allowed for industrial use.
Lubricus Lubrication System may only be put into service, if it is integrated or attached to another
machine and will be operated together with that machine.
Lubricus Lubrication System may only be used according to the technical data (see chapter
“technical data”)
Unauthorized structural changes at the Lubricus Lubrication System are not permitted. We do
not assume liability for damages of persons or machines which result from that.

Additional directives for use in accordance with the regulations:

• Pay attention to all notes in the operator’s manual / user guide.

• Carry out all maintenance work.

• Follow all appropriate regulations for the work safety and accident prevention during life of the Lubricus Lubrication

System.

• Only qualified and authorized personnel can carry out required work on the Lubricus Lubrication System.

Other uses or uses beyond those described above cannot be considered to be in accordance
with the regulations.

Extent of warranty

Warranties concerning operating safety, reliability and capacity, are only granted under the following conditions:
Assembly, installation, maintenance and repair are only carried out through trained specialist. Hazardous hot or cold
machine parts must be shielded to prevent touching.

-The Lubricus Lubrication System must be used according to the instructions in the technical operating manual

-The rated technical data must not be exceeded in any case.

-Retrofitting and repair work on the Lubricus Lubrication System may only be done by the manufacturer.

General safety information

Basic information, which must be followed during service, operation and maintenance, are listed as follows.
It is absolutely essential to read the operator’s manual / user guide by respective technical staff / technical operator befo re
installation and start up. In addition to this, it must be permanently available at the site.

IMPORTANT

Please pay attention, not only to the safety instructions under this main point, but also to those special security cautions that
are mentioned on the other pages.

This symbol warns of electrical voltage.

This symbol warns of electrical voltage.

Attention!