Gruenluft VK-8601 User Manual
Xiamen Voke Health Technology Co.,Ltd.
User Manual
VK-860 1 Quick heating water dispenser
Contents
Contents
Note
Product fertuers
Structure and name
Display panel content
Display panel operation
Operating procedure
Cleaning and maintenance
Technical parameters
Trouble phenomenon and exclusion method
1
2
3
4
5
5
6
6
7
7
1
Note
When using this product for the first time, please read
the instruction carefully.
The company does not assume legal responsibility for
damage or other accidents.
1. This series product is to be placed flat table indoors, and keep
no foreign body at the bottom of the machine
2. When use, must add water firstly, when there is water in the
tank, then machine can be connected to the electricity power for
heating, it is strictly prohibited to anhydrous dry
3. In the process of adding water, please pay attention to the
water tank and the original water tank capacity, to avoid the
water overflowing; if there is an water overflow situation, please
immediately stop adding water and cut off the power supply;
Open the drain plug at the bottom of the machine, remove
internal water machine, packed drain plug again. If the machine
inlet of water is serious, then it needs to be sent to maintenance
department to check. If water inlet is slight to the machine, the
machine can be placed in ventilated place for 2 hours, until the
water dry out from the machine.
4. The machine is strictly prohibited by children's operation, in
order to avoid hot water scald.
5. The product should be away from high temperature, and
should be placed in a cool, dry, ventilated environment, is
prohibited to be placed in a direct sunlight, or there may be
water splash in the outdoor use.
6. If the machine will not be used for a long time, please cut off
power supply, unscrew the drain plug at the bottom, pour out the
remaining water; remember that after water pouring, must install
back the drain plug.
7. If use this product for the first time or after a long period of
time, should clean up the water tank and the pipeline. The
screen shows the life of the filter element is due or need to be
replaced every 2-3 month, the power cord should be pulled out
firstly during the drainage.
Loading...