Page 1
VERTICAL GROUT CLEANING MACHINE
User Guide
MODEL: GG1217
Need Help? www.GroutGroovy.com | 727-431-9364
1
Page 2
Thank you for Choosing
Grout Groovy
Thank you for purchasing the Grout Groovytm grout cleaning
machine! All of our knowledge and experience with oor care
has come together to complete this one-of-a-kind, electric grout
cleaner. It’s an incredibly lightweight, safe, and easy way to clean
dirty tile grout anywhere in your home. Save time, money, your
back and knees.
tm
Limited Warranty
The Grout Groovytm has a 5-year limited warranty. This limited
warranty is for normal, home use. The limited warranty does not
cover commercial use and is void if used commercially. The nylon
cleaning brush is not covered under warranty. It will eventually wear
down after extended use. Contact Grout Groovytm for parts and for
service. Other failures, resulting from improper use, maliciousness,
and deliberate abuse, improper or “non-approved” components
replacing the factory ones, operator error, or typical wear and tear
may result in the item not being covered under warranty.
PLEASE DO NOT RETURN THIS PRODUCT TO THE PLACE OF
PURCHASE.
We want you to be completely satisfied with your purchase.
Please contact us with any questions or concerns. The team at Grout
Groovytm is happy to be of service.
Need Help? www.GroutGroovy.com | 727-431-9364
2
Page 3
Safety Instructions
SAFETY INSTRUCTIONS
• Keep the power cord away from sharp objects.
• Keep your hands and feet away from cleaning brush .
• Always wear shoes that are not slippery so you do not fall on wet
floor, and keep hands and feet away from the cleaning brush.
• Never use replacement parts and accessories not provided or
recommended by the manufacturer.
• If the cord becomes damaged during use, disconnect the cord
from the power supply immediately and discontinue use.
• Remove the plug from the wall socket after using the machine,
before servicing, or when the machine is not in use.
• Do not immerse the machine in water or other liquid.
• Do not use the machine if the guard is damaged or worn.
• Make sure that the cleaning brush is properly secure to the
machine in accordance with the instructions.
• Do not use worn cleaning brushes.
• Only use the machine in an upright position, with the cleaning
brush pointing to the ground.
WARNING!
When using the machine the safety rules
contained in this manual must be followed. For
your own safety and bystanders please read these
instructions before operating the machine.
WARNING!
Beware that after releasing the trigger the cleaning
brush may continue to rotate for a short period.
Need Help? www.GroutGroovy.com | 727-431-9364
3
Page 4
Product Information/Parts list
A
7
PARTS LIST (fig. B)
1) Detail corner brush
2) Wrench
3) Phillips screwdriver
4) Phillips machine screw
3
4
1) On/off trigger
2) Safety button
3) Main handle
4) Guide handle
5) Guard
6) Cleaning brush
7) Guide wheel
with traction band
5
installed
8) Power cord
6
2
1
8
1
2
B
3
NOTICE!
The traction band is hypoalergenic and made
of EPDM rubber. The nylon brush is made from
antimicrobial filament and resists mold and
mildew.
Need Help? www.GroutGroovy.com | 727-431-9364
4
4
Page 5
Quick Start Guide
1. Assemble the Grout Groovytm (fig. C).
• Insert the top of the machine, (1) containing
the handle and trigger, into the bottom of the
machine (3). It will only go together one way.
• Insert the Phillips machine screw (2) into the
hole that is now aligned and tighten with the
screw driver provided in the parts package.
Just snug it - don’t over tighten!
2. Prepare the surface to be cleaned.
• Apply liquid soap or a mild household
cleaning solution to your grout.
• Work in small areas to avoid getting too much
water or cleaning solution on the floor at
once.
C
1
2
3
3. To use Grout Groovy
the safety button on the main handle and
squeeze the on/off trigger.
• To turn the machine off release the on/off
trigger.
• Holding the machine with both hands, make sure the underside
of the machine is kept level and guide the machine at a constant
speed over the grout area moving forward and backward similar
to using a vacuum cleaner.
• There is no need to apply preasure. The nylon brush provides
plenty of scrubbing power.
4. For stubborn, dirty grout, repeat if necessary.
5. For corners and tight spaces use the detail corner prush (fig.
B, pg 4).
6. After grout is clean, mop or towel floor until dry.
tm
(fig. A, pg 4), depress
Need Help? www.GroutGroovy.com | 727-431-9364
5
Page 6
Installing a New Cleaning Brush
INSTALLING A NEW
CLEANING BRUSH
(fig. D)
• Unplug the
machine from
power source.
• Remove the old
nylon cleaning
brush by
loosening the
spindle nut (2)
while holding the
spindle (4) using
the supplied
screwdriver (3).
• Insert the shaft of the new brush onto the spindle with the cut out
of the hub facing the machine.
• When mounting the brush wheel, use the wrench (1) provided to
avoid damage to the machine.
• Tighten the spindle nut while holding the spindle using the
supplied screw driver (3). Don’t over tighten!
D
4
3
2
1
Need Help? www.GroutGroovy.com | 727-431-9364
6
Page 7
Storage
STORING THE MACHINE WHEN NOT IN USE
The machine should be stored in such a manner that it is protected
against the effects of:
• High humidity, heat, submerged in water or use with cleaning
products/chemicals may cause damage to the cleaning brush or
machine.
• Exposure to acids, or fumes from acids, which might induce
deterioration.
• Any temperature low enough to cause condensation on the
cleaning brush when removed from storage to an area of higher
temperature.
Need Help? www.GroutGroovy.com | 727-431-9364
7
Page 8
PLEASE DO NOT RETURN THIS PRODUCT TO THE PLACE OF
PURCHASE.
We want you to be completely satisfied with your purchase.
Please contact us with any questions or concerns. The team at Grout
Groovytm is happy to be of service. Contact us directly at 727-431-
9364.
GG1217–NW4–K-BL01 TECHNICAL DATA
Main voltage 120 V
Motor amperage 1.0 A
Motor rpm Max 1,200
8
Loading...