Groove GV-SP406 Operating Instrucctions

The lightning flash and arrowhead within the triangle is a warning sign
alerting you of "dangerous voltage" inside the product.

Clock Radio

With USB Charger

MODEL: GV-SP406

CAUT ION

RISK O F ELECT RIC SHOCK

DO NOT OPEN

WARNING :

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO DRIPPING OR SPLASHING LIQUIDS.

THE AC/DC ADAPTOR IS USED AS THE DISCONNECT DEVICE AND IT SHALL REMAIN
READILY OPERABLE. TO COMPLETELY DISCONNECT THE POWER INPUT, THE
AC/DC ADAPTOR OF THE APPARATUS MUST BE DISCONNECTED FROM THE MAINS
COMPLETELY. THE AC/DC ADAPTOR SHOULD NOT BE OBSTRUCTED OR SHOULD BE
EASILY ACCESSED DURING INTENDED USE.

PLEA SE NOTE : YOU WILL FIND THE
RATING LABEL FOR THIS PRODUCT
LOCATED ON THE BOTTOM OF THE UNIT.

CAUTI ON: GROUNDING OR POLARIZATION. THE PRECAUTIONS SHOULD BE TAKEN
SO THAT THE WIDER BLADE OF THE AC PLUG MUST MATCH THE SLOT IN
RECEPTACLE "WALL SOCKET".

NOTE: CAUTION SYMBOLS ARE PRINTED ON BOTTOM OF UNIT.
PLEASE REFER TO INSTRUCTION MANUAL.

THE APPARATUS SHOULD NOT BE EXPOS ED TO DRIPPIN G OR SPLASHING AND NO OBJECTS
FILLED WITH LIQUIDS SHOU LD BE PLACED ON THE APPARATUS.

THE MARKING AND RATING LABE L IS LOCATED AT BOTTOM ENCL OSURE OF THE APPARATUS.
UNDER THE I NFLUENCE OF ELE CTROSTATIC PHENOMENON,

THE PRODUC T MAY MALFUNCTION AN D USER TO POW ER RESET.

- KEE P MIN IMUM DIS TANCES (5cm) AROUND TH E APPARATUS OF SUFFI CIEN T
VEN TILATIO N.

- NO NAKE D FL AME S OURC ES, SUCH A S LIGHTED CAN DLES, SHOULD BE PLACED
ON THE A PPARATUS.

- THE USE OF APPARATU S IN MODE RATE CL IMATES.

WARNING:

To reduce the risk of electric shock, do not remove cover (or back). No
user-serviceable parts inside. Refer servicing to qualified service personnel.

CAUTION:

The exclamation point within the triangle is a warning sign alerting you of
important instructions accompanying the product.

DO NOT EXPOSE TO DRIPPING

CAUTION

OR SPLASHING LIQUIDS!

E-2

POWER SUPPLY

32

4

5

1

6

8

7

10

9

12

11

13

14

4

1

AC OPER ATIO N (E XTERN AL AC -DC POWER A DAPTOR)

- THIS SET IS EQUIPPED WITH A "DC-JACK" CAPABLE OF ACCEPTING
AC-ADAPTORS WITH A RATING OF DC = 5V, 1.5A, AND WITH A PLUG
WITH THE FOLLOWING POLARITIES AS SHOWN (CENTER POSITIVE) :

- PLEASE USE ONLY THE SUPPLIED AC-ADAPTOR TO OPERATE THE UNIT.
USE OF OTHER ADAPTORS MAY DAMAGE THE UNIT OR CAUSE IT TO MALFUNCTION.

- PLUG THE TAIL END OF THE AC-ADAPTOR INTO THE DC-JACK (SOCKET)
ON THE REAR OF THE UNIT.

- INSERT THE PLUG OF THE AC-ADAPTOR INTO A WALL OUTLET WITH AC-POWER.

- PRESS THE "ON/ OFF" KEY TO SWITCH ON THE UNIT.

- THIS UNIT IS DESIGNED TO OPERATE WITHOUT EVER BEING TOTALLY POWERED "OFF".
IT WILL EITHER BE "ON" OR IN "STANDBY MODE".

- IN STANDBY MODE, THE BACK-LIGHT OF THE DIGITAL DISPLAY WILL BE DIMMED
BUT THE DISPLAY WILL SHOW THE CURRENT TIME (CLOCK FUNCTION).

- ANYTIME DURING STANDBY MODE, YOU CAN SWITCH "ON" THE UNIT BY PRESSING
THE "ON/ OFF" KEY.

- SAVE ENERGY BY SWITCHING THE SYSTEM TO "STANDBY" MODE WHEN NOT IN USE.

-

+

16

17

LOCATION OF CONTROLS

1. SPEAKER

2. AUX INPUT SOCKET

3. USB SOCKET
(DC CHARGER: 5V/1000mA)

4. DEVICE REAR SUPPORT STAND

5. SLOT FOR PLACING YOUR DEVICE
(SMARTPHONE/ TABLET)

6. BACK KEY

7. NEXT KEY

8. MEMORY KEY

15

18

9. ON/ OFF KEY

10. VOL / AL. MODE KEY

11. VOL / CLK. SET KEY

12. FUNCTION KEY

13. FM MODE KEY

14. SNOOZE/ DIMMER KEY

15. LED DISPLAY

16. MAGIC TAPE

17. DC JACK (DC 5V )

18. FM ANTENNA WIRE

- - -

E-3

DIMMER FUNCTION

THIS SET HAS A DIMMER FUNCTION TO ADJUST THE BRIGHTNESS LEVEL
OF THE DISPLAY BACKLIGHT. SIMPLY ADJUST IT AS DESIRED BY PRESSING
THE SNOOZE/ DIMMER KEY REPEATEDLY (LOW-BRIGHTNESS/ HI-BRIGHTNESS / OFF)
THE DISPLAY BACKLIGHT WILL ALWAYS RETURN TO LOW-BRIGHTNESS AS
THE DEFAULT, AFTER THE UNIT BEEN RESET.

DIGITAL CLOCK FUNCTION

- THE SET HAS A BUILT-IN DIGITAL CLOCK.
(THE DISPLAY WILL CONTINUOUSLY SHOW THE CURRENT TIME).

HOW TO SET CORR ECT TIME:

SWITCH UNIT TO "STAND-BY" MODE

1.

PRESS & HOLD CLK SET KEY FOR 3 SECOND S DISPLAY SHOWS

2.

HOUR OR HOUR (FLASHING)

12H

PRESS BACK OR NEXT KEY TO SELECT 12-HOUR OR

3.

24-HOUR CLOCK DISPLAY SYSTEM & PRESS CLK SET KEY TO CONFIRM YOUR
SELECTION.

PRESS REPEATEDLY TO SET

4.

THE CORREC T HOUR IN THE DISPLAY & PRESS TO CONFIRM.

PRESS REPEATEDLY TO SET

5.

THE CORREC T MINUTE IN THE DISPLAY & PRESS TO CONFIRM
CORRECT TIME IS NOW SET & WILL BE SHOWN IN THE DISPLAY.

6.

24H

BACK OR NEXT KEY

BACK OR NEXT KEY

CLK SET KEY

CLK SET KEY

E-4