Groove GV-SP262 User Manual

Groov-e GV-SP262Water-Resistant Bluetooth Speaker

Charging the GV-SP262 (3.7V rechargeable battery built-in)

1- Connect GV-SP262 with PC/Laptop/Mac or any 5V USB adaptor(not included) with the USB cable included
2- Red LED turns ONduring charging, turns OFF after fully charged.
3- Unplug USB cable after fully charged.
4- Red LED twinkles when low power(<21%), with indication sound.

Paring GV-SP262 withmobiles (Bluetooth enabled) and Tablets.

1- Please keep the speaker and mobile within 1 meter.
2- Turn on GV-SP262, white& red LEDblinks quickly, the speaker is standby for pairing.
3- Start the Bluetooth function of mobile and search the Bluetooth devices, after searched, select “GV-SP262” in
the Bluetooth device list.As per of the pairing process, you may need to enter a passkey (0000) depending on
Bluetooth version of devices.
4- After successful pairing, select “GV-SP262” in the Bluetooth device list, and press “connect”
5- After successful connecting, LED changes to solid white.

Note:
1: If the pairing is not successful, turn off speaker and re-pair again.
2: After successful pairing, paired devices will remember each other. Unless pairing information is deleted, no need to
pair when use next time.
3: Pairwith new device according to steps 1-5above after disconnecting existing pair.

Whats in the box

1 x GV-SP262 Bluetooth speaker 1 x Micro USB charge cable
1 x Users manual 1 x AUX cable

Power Switch Hand-free Volume -/+

AUX

USB charge port

LED indicator