Gronomics PP2 18-34, PP2 18-34S Assembly Instruction Manual
1
1 2
11
3 4
13
14
15
16
17
Pergola Planter 18” x 34”
10
9
87
65
12
Assembly Instruction
Parts Identifi cation Box 1
Remove contents from Box 1 of 3.
Stack matching pieces in piles. Using the
parts list, locate and count the individual
pieces and verify that you have received
the correct number of pieces.
If any pieces are missing or replacement
parts are required, contact Gronomics at
1-855-299-6727.
NOTE: Ground preparation is optional,
however we recommend leveling area
under frame of product, or place product
directly on a flat level surface before
filling with soil.
Torx® T15
14
Torx® T25
16
15
Torx® T30
17
13
Item #: PP2 18-34
Item #: PP2 18-34S
11
12
10
Box 1 of 3
ITEM QTY. PART # DESCRIPTION
1 2
FL2236
Fabric Liner, 22” x 36”
2 4 3100 Post Cap, 4” x 4” x 1-1/2”
3 4 1451 Narrow Center Side Rail, 14-1/2” x 2-1/2” x 1”
4 4 1551 Corner Notched Bottom Board, 15-1/2” x 4-1/2” x 1”
5 8 1450 Side Rail, 14-1/2” x 5-1/2” x 1”
6 8 1550 Bottom Board, 15-1/2” x 5-1/2” x 1”
7 4 3103 Narrow Center Side Rail, 31” x 2-1/2” x 1”
8 4 3102 Side Rail w/Cleat, 31” x 5-1/2” x 1”
9 4 3101 Side Rail, 31” x 5-1/2” x 1”
10 2 3101L Side Rail w/Logo, 31” x 5-1/2” x 1”
11 4 3201 Corner Post, 4” x 4” x 32”
12 2 7022 Support Plate
13 2 7021 Pentagon Cap
14 12 CS8-112ZY 8 x 1-1/2” GRK Screw (Trellis)
15 20 RSS516-234ZY RSS 5/16 x 2-3/4” GRK Screw (Support Plate)
16 8 RSS516-234ZY RSS 5/16 x 2-3/4” GRK Screw (Posts)
17 12 R410-4ZY R4 10 x 4” GRK Screw (Crosspieces into Trusses)
Packaged & Inspected by: Date:
Continued
www.gronomics.com East Bethel, MN USA 763-753-7374
2
Parts Identifi cation Box 2
19
18
3
20
21
22
Remove contents from Box 2 of 3.
Stack matching pieces in piles. Using the parts list, locate and
count the individual pieces and verify that you have received
the correct number of pieces.
If any pieces are missing or replacement parts are required,
contact Gronomics at 1-855-299-6727.
NOTE: It is recommended to place a protective layer between
the ground and the pieces during assembly. This will help
prevent damage to the pieces.
18
Box 2 of 3
ITEM QTY. PART # DESCRIPTION
18 4 6100
19 6 6102
Truss, 2” x 8” x 61-3/4”
Truss Cross Piece, 2” x 6” x 58”
Long to Short
19
Parts Identifi cation Box 3
Remove contents from Box 3 of 3.
Stack matching pieces in piles. Using the parts list, locate and count the
individual pieces and verify that you have received the correct number of
pieces.
If any pieces are missing or replacement parts are required, contact
Gronomics at 1-855-299-6727.
NOTE: It is recommended to place a protective layer between the ground
and the pieces during assembly. This will help prevent damage to the pieces.
20
21
Box 3 of 3
ITEM QTY. PART # DESCRIPTION
20 2
7023 Trellis, 29” x 52”
21 2 6103-Lt Post, LH, 4” x 4” x 80”
22 2 6103-Rt Post, RH, 4” x 4” x 80”
22
Continued
www.gronomics.com East Bethel, MN USA 763-753-7374
4
Corner Post Assembly
8
21
22
9
7
5
5
11
5
3
5
11
5
11
21
22
5
11
5
3
Planter Box Assembly
Locate one 4” x 4” x 80” corner post
(Item 21) marked with an “X” and one
4” x 4” x 80” corner post (Item 22)
marked with an “O”.
Place the two posts fl at on the ground
with slots facing up and slots facing
the inside. Ensure that the notches
face outward.
Locate and install one 31” x 5-1/2”
side rail w/cleat (Item 8) (with cleat
facing you) into the upper (wide) part
of the slot on the two posts.
Slide the side rail down to the bottom
of the slot.
Install one 31” x 2-1/2” narrow center
side rail (Item 7) and slide down.
Install one 31” x 5-1/2”side rail (Item
9) and slide down.
“X”
Notches
22
21
Locate one 4” x 4” x 32” corner post
(Item 11) and one 14-1/2” x 5-1/2”side
rail (Item 5).
Place the post on the ground (slots
towards the top), turn the post until one
slot is facing you and a second slot is
facing to the right. Slide the side rail into
“O”
slot and slide to the bottom of the slot.
Rotate the 4” x 4” x 32” corner post
11
11
(Item 11) and the 14-1/2”x 5-1/2” side
rail (Item 5) 90°, install the side rail into
the upper (wide) part of the slot on the
4” x 4” x 80” corner post (Item 21) and
slide to the bottom of the slot.
21
Install one 14-1/2” x 2-1/2” narrow
center side rail (Item 3) and slide down.
Install one 14-1/2” x 5-1/2” side rail
(Item 5) and slide down.
Locate one 4” x 4” x 32” corner post
(Item 11) and one 14-1/2”x 5-1/2” side
rail (Item 5).
Place the post on the ground (slots
towards the top), turn the post until one
slot is facing you and a second slot is
facing to the left. Slide side rail into slot
and slide to the bottom of the slot.
Rotate the 4” x 4” x 32” corner post
(Item 11) and the 14-1/2” x 5-1/2” side
rail (Item 5) 90°, install the side rail into
the upper (wide) part of the slot on the
4” x 4” x 80” corner post (Item 22) and
slide down to the bottom of the slot.
Install one 14-1/2” x 2-1/2” narrow
center side rail (Item 3) and slide down.
Install one 14-1/2” x 5-1/2” side rail
(Item 5) and slide down.
11
11
22
Continued
www.gronomics.com East Bethel, MN USA 763-753-7374
Loading...