Model T10878 & T10879
G0703 & G0703P Cartridge Filter Replacement
with HEPA Filter Upgrade Kit
Step One:
emove the HEPA filter housing from the blower housing, as shown above, by first loosening and removing
R
(12) 5/16” x 5/8” hex bolts on the blower housing. After that, loosen and remove (1) 5/16” x 3/4” x and 5/16”
flat washer from the cartridge filter adapter brace at the bottom.
，
Step Two:
ake the HEPA filter housing and remove the HEPA filter cage by loosening and removing (8) 1/4” x 3/4” hex
T
bolts and 1/4” flat washers. Install the new HEPA filter by installing and tightening the (8) hex bolts and flat
washers to complete the change.
Step Three:
emove the dirty cartridge filter from the filter housing, as shown above, and install the new cartridge filter.
R
Attach the clean HEPA filter housing to the blower housing by installing and tightening (12) 5/16” x 5/8” hex
bolts on the blower housing. After that, install and tighten (1) 5/16” x 3/4” x and 5/16” flat washer to the
cartridge filter adapter brace at the bottom to complete the change.
UPGRADE COMPLETE!
Loading...