Grizzly H8174 User Manual
Introduction
This heavy-duty 50 gallon dust collection drum
bag holder is zinc plated and comes with sturdy
rubber handles for ease of use.
Inventory
After all the parts have been removed from the
box, use the Parts Breakdown on
inventory the parts.
Page 2 to
MODEL H8174
50 Gallon Dust
Collection Bag Holder
INSTRUCTION SHEET
The metal plates of this bag holder have
sharp edges. Use gloves to protect your
hands during assembly to avoid cutting
yourself.
Assembly
1. Connect the four metal plates together using
the (24) #10-20 x
and the (24) #10-20 hex nuts (see
1).
2. Install the rubber handles on the inside of the
bag holder with the (4)
the (8)
hex nuts.
If you need help with your new bag holder, call our
Tech Support at: (570) 546-9663.
1
⁄4" fender washers, and the (4) 1⁄4"-20
3
⁄8" Phillips head screws
Figure
1
⁄4"-20 x 5⁄8" hex bolts,
Figure 1. Model H8174 assembled.
Use the Model H8174 bag holder with the dust
collection bag as shown in Figure
Figure 2. Model H8174 inserted into 50 gallon
dust collection drum with collection bag.
2.
COPYRIGHT © MARCH, 2007. BY GRIZZLY INDUSTRIAL, INC., REVISED OCTOBER, 2007
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#TS9106 PRINTED IN TAIWAN
H8174 Parts Breakdown and List
8
1
4
2
Item Part Number Description Quantity
1 PH8174001 Bag Holder Plates 4
2 PN07 Hex Nuts #10-24 16
3 PS06 Phillip Head Screws #10-24 x 3⁄8 " 16
4 PH8173004 Rubber Handles 2
5 PN05 Hex Nuts 1⁄4"-20 4
6 PH8173006 Fender Washers 1⁄4" 8
7 PB02 Hex Bolts 1⁄4"-20 x 5⁄8 " 4
8 PH8174008 Collection Bag 251⁄8 " x 471⁄4" 5
3
5
6
7
Loading...