Grizzly H7774 User Manual
You MUST clean and sanitize food contact
surfaces before using this product.
to follow this warning may lead to illness!
Failure
Assembly
Use the 16 hex bolts w/washers to attach the legs
to the table top. Use the 4 cap screws w/washers
to attach the shelf to the legs. Insert feet into legs
and rotate the feet to level the table. Refer to the
parts breakdown if you need further help.
MODEL H7774
STAINLESS STEEL
TABLE
INSTRUCTION SHEET
Model H7774.
Cleaning
Use a mild detergent or a vinegar-water solution
to clean and sanitize your table. Always wipe the
table dry with a soft cloth after cleaning.
Care
• Clean your table frequently to keep it sanitary
and looking nice.
• Avoid cleaners that contain chlorine.
• Avoid using steel wool when scrubbing—
small fragments can break off and rust in the
table surface.
• Avoid direct contact with foods containing a
lot of citrus, salt, or acid. These may leave
a white stain that will require cleaning with a
ScotchBrite pad to renew the surface.
• Always scrub in the same direction as the
stainless steel polish lines in the surface.
• Avoid cutting directly on the table surface as
this will rapidly dull your knives and leave
small scratches in the table surface.
Legs attached to table top.
Shelf attached to legs.
COPYRIGHT © NOVEMBER, 2005 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#TR7728 PRINTED IN CHINA
H7774 Parts Breakdown and List
REF PART # DESCRIPTION
1 PH7774001 TABLE TOP
2 PH7774002 LEG
3 PW01M FLAT WASHER 8MM
4 PB84M HEX BOLT M8-1.25 X 14
5 PH7774005 FOOT HOUSING
6 PH7774006 FOOT
7 PW01M FLAT WASHER 8MM
8 PSB31M CAP SCREW M8-1.25 X 25
9 PH7774009 SHELF
Loading...