Grizzly H7517 User Manual

Introduction

The Model H7517 Cordless Rechargeable LED Work Light (Figure 1 30 LEDs that stay lit 5 to 6 hours on each charge, and a water-resistant body.

) features a retractable hook,

Inventory

A. Work Light .................................................. 1

B. Charger ...................................................... 1

C. Cord ............................................................ 1

Assembly and Operation

1. Attach the cord to the charger.

CORDLESS LED

WORK LIGHT

MODEL H7517

INSTRUCTION SHEET

Figure 1. Model H7517.

2. Place the work light into the charger and

charge for 6-8 hours before the first use. An indicator light on the charger glows red dur ing charging.

Note—If the indicator light does not illumi

nate, make sure the work light and charger contact. Be sure the work light is charging.

3. Remove the work light from the charger when the indicator light turns green, showing it is fully charged the bottom warning LED turns red.

Note

4. Charge the work light in the charger for three

—After the warning LED illuminates,

the work light will stay lit for several seconds before shutting off

hours after the warning LED illuminates. charge the light before storing

. Recharge the work light when

OFF before

Fully

Keep away from fire! Work light could explode!

NOTICE

Work light is water resistant, but not waterproof. Unit may be damaged if submerged in water.

If you need additional help with this assembly, call our service department at: (570) 546-9663.

H7517 Parts Breakdown and List





















1 PH7517001 HOOK 2 PH7517002 HOOK BRACKET 3 PH7517003 END CAP 4 PH7517004 BATTERY 4.8V 3300MA/H-NI-H 5 PH7517005 TAP SCREW M3 X 25 6 PH7517006 TAP SCREW M2 X 6 7 PHTEK9M TAP SCREW M3 X 15 8 PH7517008 WORK LIGHT 9 PH7517009 CHARGER 10 PH7517010 CORD

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

#BL6956 PRINTED IN CHINA