Grizzly H6472 User Manual

SHOP FOX® CLASSIC FENCE











MODEL H6472

MANUAL INSERT

Introduction

The Model H6472 Shop Fox Classic Fence is made
exclusively for Grizzly Industrial by Woodstock
International to fit the Model G7209/G7210 14"
Table Saw. The Model H6472 is exactly the same
as the regular Shop Fox Classic fence, except
that the fence body, fence facing, and rails are
different.

How to Use this Sheet

This instruction sheet was designed to be used in
conjunction with the instruction manual provided
by Woodstock International, which is intended
for the regular Shop Fox Classic Fence (Model
W2005/W2006/W2007).

Because this is fence is produced only for Grizzly
Industrial, replacement parts exclusive to the
Model H6472 (shown to the right) are only avail
able through Grizzly Industrial.

All other parts common to the Model W2005/
W2006/W2007 can be ordered through the
instruction manual included with your fence by

Woodstock International.

Parts Exclusive to H6472
(for all others refer to W2005 parts)

-

All instructions for the Model H6472 are the same
as the instructions for the Model W2005/W2006/
W2007, which are found in the instruction manual
included with your fence.

If you need additional help with assembly or
set up, we will be glad to help! Call our service
department at: [phone].

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE

COPYRIGHT © OCTOBER, 2004 BY GRIZZLY INDUSTRIAL, INC.

WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL.

#TR6708 PRINTED IN TAIWAN

REF PART # DESCRIPTION

8 PH6472008 FENCE BODY
8A PH6472008A FENCE FACING
10 PH64720010 REAR RAIL
10A PH64720010A FRONT RAIL SUPPORT

MODELS

W2005, W2006, W2007

CLASSIC FENCE

INSTRUCTION MANUAL

Phone: [phone] • On-Line Technical Support: [e-mail]

COPYRIGHT © JANUARY 2000, REVISED MA RCH 2004 BY WOODSTOCK INTERNATIONAL, INC.

WARN ING : N O PORT ION OF THIS M ANUAL MAY BE RE PRO DUCED IN ANY SH APE OR FORM W ITHOU T

THE W RITTE N APPR OVAL O F WOOD STOCK INTER NAT IONAL , INC.

Prin ted in Taiwa n

CONTENTS

INTRODUCTION ............................................................................................ 2¦¦¦¦

General ........................................................................................................... 2

Warranty ......................................................................................................... 3

SAFETY PRECAUTIONS ................................................................................... 4

INSTALLATION ............................................................................................. 5

Inventory ........................................................................................................ 5

Rail Installation ................................................................................................ 6

Correcting Mounting Hole Misalignment ................................................................... 7

Magnetic Switch ................................................................................................ 8

7-Foot Rails ..................................................................................................... 9

Blade Guard ................................................................................................. 10

Fence .......................................................................................................... 10

ADJUSTMENTS ............................................................................................11

Fence Parallelism ............................................................................................ 11

Lock Handle .................................................................................................. 12

Fence-to-Table Clearance .................................................................................. 12

Scale and Cursor ............................................................................................. 13

OPERATIONS ..............................................................................................14

Using a Wood Fence Facing ................................................................................ 14

Using Board Buddies® ....................................................................................... 14

PARTS ...................................................................................................... 15

W2005 Fence Parts Diagram ................................................................................ 15

W2005 Standard Rail Parts Diagram ....................................................................... 16

W2007 Leg and 7' Rail Parts Diagram ..................................................................... 17

W2005 Parts List .............................................................................................. 18

W2007 Parts List .............................................................................................. 18

INTRODUCTION

General

Thank you for purchasing Woodstock
International’s SHOP FOX® Classic Fence.
This fence is classic in its design and function,
and provides a perfect upgrade for table saw
owners who expect precision and ease of
installation. It has been designed to fit almost
all contractor and cabinet-style table saws and
is easy to install.

The SHOP FOX® Fence features include:

• Wide T-shape style design for maximum
accuracy and support.

• Single locking action cam lever.

• Simple mounting procedure, easy lift off
design for the fence makes using jigs and
fixtures simple.

• HDPE high durability plastic fence surface
provides low sliding resistance.

• Fence can be used on either the right or
left side of the blade.

• Magnified cursor can be mounted on
either side of the fence.

• Fence body has powder coated paint
surface for durability.

• Standard rails provide 25" maximum rip to
the right of the blade (W2005).

Woodstock is pleased to provide this manual
to assist in the installation and operation of
the SHOP FOX® Classic Fence. It represents
our effort to offer the finest documentation
available. If you feel there are areas where this
manual could be improved, we encourage you
to write us with your comments at the following
address:

Technical Documentation

Woodstock International, Inc.

P.O. Box 2309

Bellingham, WA 98227

Tel: [phone]

Fax: [phone]

This fence was specifically designed to
be used on table saws to assist in cutting
operations. DO NOT MODIFY AND/OR USE
THIS FENCE FOR ANY OTHER PURPOSE.
Modifications or improper use of this device
will void the warranty. If you are confused
about any aspect of this accessory, DO NOT
use it until all your questions have been
answered. Serious injury may occur.

• Optional long rails provide 54" maximum
rip to the right of the blade (W2006).

-2- Shop Fox® Classic Fence

Warranty

Woodstock International, Inc. (Woodstock)
warrants this product against defects in
workmanship and materials under normal use
and service for a period of one year. This
warranty extends to the original purchaser from
the date of purchase. This warranty does not
apply to defects due directly or indirectly to
misuse, abuse, negligence, accidents, repairs
or alterations or lack of maintenance.

This is Woodstock’s sole written warranty and
any and all warranties that may be implied by
law, including any merchantability or fitness,
for any particular purpose, are hereby limited
to the duration of this written warranty. We do
not warrant or represent that the merchandise
complies with the provisions of any law or acts.
In no event shall Woodstock’s liability under
this warranty exceed the purchase price paid
for the product and any legal actions brought
against Woodstock shall be tried in the State of
Washington, County of Whatcom.

We shall in no event be liable for death,
injuries to persons or property or for incidental,
contingent, special or consequential damages
arising from the use of our products.

To take advantage of this warranty, the product
or part must be returned to the original place
of purchase. Proof of purchase must accompany
the merchandise. Woodstock reserves the right
to change specifications at any time since we
constantly strive to achieve better quality
equipment.

We make every effort to ensure that our
products meet high quality and durability
standards and we hope you never need to use
this warranty.

Shop Fox® Classic Fence -3-

SAFETY PRECAUTIONS

These safety rules cannot cover every situation in a woodshop. Consider your conditions when

setting up and using your SHOP FOX

1. KNOW YOUR TABLE SAW. Read the

owner’s manual carefully. Learn the tool’s
applications and limitations, as well as its
particular hazards.

2. DO NOT REMOVE GUARDS.

guards in working order.

3. ENSURE THAT YOUR TABLE SAW IS
ELECTRICALLY GROUNDED. Never remove

the grounding prong.

4. KEEP WORK AREA CLEAN. Cluttered areas
invite accidents.

5. AVOID DANGEROUS ENVIRONMENTS.

Do not use power tools in damp or wet
locations or expose them to rain. Keep
your work area well lighted.

Maintain

12. USE A PUSH STICK WHEN CUTTING

13. DO NOT REACH BEHIND TABLE SAW

14. DO NOT LET THE END OF THE

15. DISCONNECT TABLE SAW FROM POWER

®

Classic Fence.

NARROW PIECES.

TO GRAB CUTOFF PIECE. If wood binds

against saw blade it will kick back faster
than you can let go.

WORKPIECE CONTACT THE FENCE WHILE
CROSSCUTTING WOOD WITH THE MITER
GAUGE. There is a potential for kick-back.

Move the fence away.

before servicing and when changing
accessories, such as blades, bits, and
cutters.

6. MAKE WORKSHOP CHILD-PROOF with
padlocks, master switches, or by removing
starter keys.

7. DO NOT FORCE WORK THROUGH TABLE
SAW. Tools work better and more safely

when they are allowed to work at their
own speed.

8. WEAR PROPER APPAREL. Do not wear
loose clothing, gloves, neckties, or jewelry
that might get caught in moving parts.
Non-slip footwear should be worn. Tie
back long hair.

9. NEVER STAND OR LEAN ON TOOL.

10. ALWAYS USE SAFETY GLASSES, EAR
PROTECTION AND RESPIRATORY
PROTECTION.

11. DO NOT OVERREACH. Keep proper footing

and balance at all times.

16. AVOID ACCIDENTAL STARTING. Make sure

the switch is in the “
plugging in the cord.

17. CHECK DAMAGED PARTS. Do not operate

the table saw until you are certain it is in
perfect running condition.

18. NEVER LEAVE THE TABLE SAW RUNNING
UNATTENDED - TURN POWER OFF. Do not

leave the saw until it comes to a full stop.

19. DO NOT OPERATE EQUIPMENT IF USING
DRUGS, ALCOHOL, OR MEDICATION.

20. DO NOT OPERATE EQUIPMENT if you are

mentally or physically fatigued.

21. IF THERE IS SOMETHING YOU DO NOT
UNDERSTAND, DO NOT OPERATE
MACHINE! Ask for help first.

22. BAD HABITS ARE DANGEROUS. Review all

safety procedures often.

OFF” position before

-4- Shop Fox® Classic Fence

INSTALLATION

Inventory

Installation of the SHOP FOX® Classic Fence
involves mounting the front and back rails to
your table saw, setting the fence on the rails
and doing a simple alignment. First check the
contents of the package:

Model W2005

Fence Assembly ..............................

Back Rail .....................................

Front Rail .....................................

Front Rail Rectangular Tube ...............

Scale ........................................... 1

Drill and Tap .................................

Blade Guard Clamp Bag

• V-Clamp ..................................

• L-Bracket ................................. 1

• Locking Plate ............................ 1

• Hex Bolt 1⁄4-20 X 11⁄2" ................. 2

• Flat Washer 1⁄4" .........................4

• Hex Nut 1⁄4-20 ........................... 2

• Hex Bolt 5⁄16-18 X 3⁄4" ................. 1

• Flat Washer 5⁄16" ....................... 2

• Hex Nut 5⁄16-18 .......................... 1

Rail Mounting Bags

• Hex Bolt 1⁄4-20 X 3⁄4" ................... 4

• Hex Bolt 3⁄8-16 X 1" ..................... 4

• Flat Hd Scr 1⁄4-20 X 3⁄4" ................. 2

• Flat Washer 1⁄4" ........................10

• Flat Washer 3⁄8" ......................... 8

• Hex Nut 1⁄4-20 ............................. 2

• Hex Bolt M10-1.5 X 25 ................. 4

1
1
1
1

1

1

Model W2007

Back Rail 7' ...................................

Front Rail 7' ...................................

Front Rail Rectangular Tube 7' ............

Scale ........................................... 1

Drill and Tap .................................

Blade Guard Clamp Bag

• V-Clamp ..................................

• L-Bracket ................................. 1

• Locking Plate ............................ 1

• Hex Bolt 1⁄4-20 X 11⁄2" ................. 2

• Flat Washer 1⁄4" .........................4

• Hex Nut 1⁄4-20 ........................... 2

• Hex Bolt 5⁄16-18 X 3⁄4" ................. 1

• Flat Washer 5⁄16" ....................... 2

• Hex Nut 5⁄16-18 .......................... 1

Rail Mounting Bags

• Hex Bolt 1⁄4-20 X 3⁄4" ................... 4

• Hex Bolt 3⁄8-16 X 1" ..................... 4

• Flat Hd Scr 1⁄4-20 X 3⁄4" ................. 2

• Flat Washer 1⁄4" ........................10

• Flat Washer 3⁄8" ......................... 8

• Hex Nut 1⁄4-20 ............................. 2

• Hex Bolt M10-1.5 X 25 ................. 4

Legs ...........................................2

Support Bracket ..............................

Feet ............................................ 2

Leg Mounting Bag

• Hex Nut 1⁄2-12 ............................. 2

• Flat Washer 3⁄8" ......................... 8

• Hex Bolt 1⁄4-20 X 1⁄2" ..................4

• Flat Washer 1⁄4" ......................... 4

• Hex Bolt 3⁄8-16 X 5⁄8" ................... 2

1
1
1

1

1

2

Model W2006

Fence Assembly .............................. 1

All other components are the same as the
Model W2007.

Shop Fox® Classic Fence -5-

Note—Extra mounting hardware has been included
to compensate for differences between table
saws. You may not need all of the hardware that
is included in the inventory.