Grizzly H6194 Instruction Sheet
EYE/EAR INJURY HAZARD!
Wear safety glasses and
hearing protection during
use of this tool!
INJURY HAZARD!
Always disconnect tool from
air to prevent unexpected
operation during service!
EXPLOSION HAZARD!
Never exceed 90 PSI!
MODEL H6194
3
⁄8" INDUSTRIAL AIR
DRILL
INSTRUCTION SHEET
Figure 1. Model H6194.
Introduction
Heavy-duty industrial air drill features paddle
switch for easy control, a
air exhaust and rugged aluminum body. It has a
22,000 RPM free speed with 4 CFM average air
consumption.
A. Industrial Air Drill ........................................ 1
B. 3⁄8" Jacobs® Chuck ...................................... 1
C. Chuck Key .................................................. 1
D. Wrench ....................................................... 1
3
⁄8" Jacobs® chuck, rear
Operation
Screw the chuck on the arbor and tighten with the
wrench provided. Add a
connect to your regulated compressed air supply.
Do not exceed 90 PSI!
1
⁄4" MNPT air fitting and
This industrial air drill MUST have 3-4 drops of oil
directly dropped into the air fitting before each use
as shown in Figure 2
Figure 2. Lubricating directly into air fitting.
If you need help with your new pneumatic tool,
call our Tech Support at: (570) 546-9663.
.
COPYRIGHT © APRIL, 2006 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#PC8030 PRINTED IN CHINA
H6194 Parts Breakdown and List
REF PART # DESCRIPTION REF PART # DESCRIPTION
1 PH6194001 VALVE SCREW 16 PH6194016 CYLINDER
2 PH6194002 O-RING 17 PH6194017 ROTOR BLADE
3 PH6194003 O-RING 18 PH6194018 ROTOR
4 PH6194004 AIR REGULATOR 19 PH6194019 ROTOR COLLAR
5 PH6194005 SPRING 20 PH6194020 FRONT END PLATE
6 PH6194006 O-RING 21 PH6194021 BALL BEARING
7 PH6194007 VALVE STEM 22 PH6194022 SPINDLE
8 PH6194008 LEVER PIN 23 PH6194023 CLAMP NUT
9 PH6194009 THROTTLE PIN 24 PH6194024 HOUSING CAP
10 PH6194010 MOTOR HOUSING 27 PH6194027 VALVE BUSHING
11 PH6194011 EXHAUST DEFLECTOR 28 PH6194028 CHUCK KEY
12 PH6194012 AIR INLET 29 PH6194029 O-RING
13 PH6194013 BALL BEARING 30 PH6194030 SPANNER WRENCH
14 PH6194014 REAR END PLATE 31 PH6194031 CHUCK
15 PH6194015 STEEL BALL
Loading...