Grizzly H6139 User Manual

EYE INJURY HAZARD!

Quick Connector

Quick Coupler

Air Hose

Quick Coupler

Quick Connector

Lubricator

Filter

Regulator

Air

Compressor

Your Tool

Always wear safety glasses when using this tool to prevent serious personal

INJURY HAZARD! Always disconnect tool from air to prevent unexpected operation during service.

EXPLOSION HAZARD!

Never exceed 120 PSI.

MODEL H6139

⁄2" REVERSIBLE AIR

DRILL

INSTRUCTION SHEET

Figure 1. Model H6139.

Introduction

Features include a pistol grip with trigger switch, forward and reverse switch and

air inlet. The

⁄64" and includes a chuck key. The auxiliary

⁄2 " chuck accepts drill bits down

handle can be positioned anywhere around the drill body.

⁄4" NPT female

Inventory

A. Air Drill ........................................................ 1

B. 1⁄4" NPT Quick Connect Fitting (male) ........ 1

C. Chuck Key .................................................. 1

D. Handle ........................................................ 1

E. Lock Collar ................................................. 1

Operation

Tool requires 90 PSI to operate correctly.

To improve tool lifespan, use a filter/lubricator/ regulator as shown in Figure 2. Otherwise, lubri cate daily with a couple drops of pneumatic tool oil directly into the air fitting as shown in Figure 3

Figure 2. Installing your tool.

Figure 3. Lubricating directly into air fitting.

If you need help with your new pneumatic tool, call our Tech Support at: (570) 546-9663.

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

#KM7955 PRINTED IN CHINA

H6139 Parts Breakdown and List

REF PART # DESCRIPTION REF PART # DESCRIPTION

1 PH6139001 AIR INLET 18 PH6139018 STEEL BALL 2 PH6139002 EXHAUST DEFLECTOR 19 PH6139019 FRONT PLATE 3 PH6139003 SPRING PIN 20 PH6139020 BEARING 4 PH6139004 HOUSING 21 PH6139021 WASHER 5 PH6139005 SPRING 22 PH6139022 GEAR LINK 6 PH6139006 O-RING 23 PH6139023 GEAR 7 PH6139007 VALVE STEM 24 PH6139024 PIN 8 PH6139008 O-RING 25 PH6139025 GEAR PLATE 9 PH6139009 REVERSE LEVER 26 PH6139026 GEAR SHAFT 10 PH6139010 TRIGGER 27 PH6139027 SHAFT 11 PH6139011 SCREW 28 PH6139028 BEARING 12 PH6139012 BEARING 29 PH6139029 CLAMP NUT 13 PH6139013 REAR PLATE 30 PH6139030 WASHER 14 PH6139014 STEEL BALL 31 PH6139031 DRILL CHUCK 15 PH6139015 CYLINDER 32 PH6139032 CHUCK SCREW 16 PH6139016 ROTOR 33 PH6139033 BUSHING 17 PH6139017 ROTOR BLADE 34 PH6139034 O-RING