Grizzly H2881 User Manual

EYE/EAR INJURY HAZARD! Wear safety glasses and hearing protection during use of this tool!

OVER INFLATION HAZARD!

Never exceed 8 PSI!

MODEL H2881

4" PNEUMATIC DRUM

SANDER

INSTRUCTION SHEET

RESPIRATORY HAZARD! Sanding produces fine dust. Wear the appropriate protection during use!

Introduction

This rolling-pin style pneumatic drum sander is perfect for hand contouring and smoothing projects that are too large to use with a station ary sander. Simply chuck the portable electric drill, cordless drill or air powered drill for two-handed control. Choose this 4 diameter size for getting into tight areas. Features ball bearing handle and air valve for easy bicycle pump inflation.

⁄8 " spindle into a

" x 11⁄8 "

Inventory

A. Drum Sander .............................................. 1

B. Spare Valve Cap ........................................ 1

Operation

Slide the sanding sleeve over the drum. Remove the plastic cap on the handle with a small screw driver to expose the air valve. Inflate to the desired pressure. DO NOT exceed 8 PSI!

Figure 1. Model H2881.

Figure 2. Pneumatic drum sander in action.

4" Aluminum Oxide Sanding Sleeves

H3875 H3876 H3877 H3878 H3879 H3880

If you need help with your new pneumatic tool, call our Tech Support at: (570) 546-9663.

11⁄8 " x 4" x 60 Grit 11⁄8 " x 4" x 100 Grit 11⁄8 " x 4" x 150 Grit 11⁄8 " x 4" x 180 Grit 11⁄8 " x 4" x 220 Grit 11⁄8 " x 4" x 320 Grit

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

#PC8119 PRINTED IN TAIWAN