Grizzly G5850 Z User Manual
MACHINE DATA
SHEET
Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901
MODEL G5850Z 20" PROFESSIONAL PLANER W/ 5 HP
SINGLE-PHASE MOTOR
Product Dimensions:
Weight.............................................................................................................................................................. 940 lbs.
Length/Width/Height.................................................................................................................38 x 40-1/2 x 42-1/4 in.
Foot Print (Length/Width).................................................................................................................26-1/2 x 24-1/2 in.
Shipping Dimensions:
Type...........................................................................................................................................................Wood Crate
Content............................................................................................................................................................Machine
Weight............................................................................................................................................................ 1010 lbs.
Length/Width/Height............................................................................................................................. 41 x 43 x 45 in.
Electrical:
Switch........................................................................................................ Magnetic with Thermal Overload Protector
Switch Voltage......................................................................................................................................................220V
Cord Length............................................................................................................................................................ 7 ft.
Cord Gauge....................................................................................................................................................10 gauge
Minimum Circuit Size........................................................................................................................................ 30 amp
Plug Included............................................................................................................................................................No
Motors:
Main
Type..................................................................................................................TEFC Capacitor Start Induction
Horsepower.................................................................................................................................................5 HP
Voltage........................................................................................................................................................220V
Prewired......................................................................................................................................................220V
Phase........................................................................................................................................................Single
Amps.............................................................................................................................................................25A
Speed.................................................................................................................................................3450 RPM
Cycle..........................................................................................................................................................60 Hz
Number Of Speeds........................................................................................................................................... 1
Power Transfer .......................................................................................................................Twin V-Belt Drive
Bearings.......................................................................................................................Shielded and Lubricated
Feed
Type..................................................................................................................TEFC Capacitor Start Induction
Horsepower.................................................................................................................................................2 HP
Voltage........................................................................................................................................................220V
Prewired......................................................................................................................................................220V
Phase........................................................................................................................................................Single
Amps.............................................................................................................................................................12A
Speed.................................................................................................................................................3450 RPM
Cycle..........................................................................................................................................................60 Hz
Number Of Speeds........................................................................................................................................... 1
Power Transfer ......................................................................................................Variable Split Pulley System
Bearings.......................................................................................................................Shielded and Lubricated
The information contained herein is deemed accurate as of 10/7/2008 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.
PAGE 1 OF 3Model G5850Z
Main Specifications:
Operation Info
Max. Cut Width...........................................................................................................................................20 in.
Max. Cut Height............................................................................................................................................7 in.
Min. Stock Length........................................................................................................................................8 in.
Min. Stock Width....................................................................................................................................... 1/4 in.
Max. Stock Thickness............................................................................................................................7-3/4 in.
No. Of Cuts Per Inch..............................................................................................................................67 - 102
No. Of Cuts Per Minute.............................................................................................................................20800
Cutterhead Speed..............................................................................................................................5200 RPM
Planing Feed Rate...........................................................................................................................17 - 26 FPM
Max. Cut Depth Planing Full Width......................................................................................................... 1/16 in.
Max. Cut Depth Planing 6 Inch Wide Board..............................................................................................1/8 in.
Cutterhead Info
Cutterhead Type......................................................................................................................................4 Knife
Cutterhead Dia.......................................................................................................................................3-1/8 in.
No. Of Knives....................................................................................................................................................4
Knife Type....................................................................................................................................................HSS
Knife Size Length.......................................................................................................................................20 in.
Knife Size Width...........................................................................................................................................1 in.
Knife Size Thickness.................................................................................................................................1/8 in.
Knife Adjustment............................................................................................................. Gibs and Jack Screws
Table Info
Table Movement...........................................................................................................................................8 in.
Table Bed Size Length.........................................................................................................................21-1/4 in.
Table Bed Size Width...........................................................................................................................28-1/4 in.
Table Bed Size Thickness............................................................................................................................3 in.
No. Of Bed Rollers............................................................................................................................................2
Floor To Table Height...................................................................................................................22-1/2 - 30 in.
Construction
Table Construction...................................................................................................Precision Ground Cast Iron
Body Construction................................................................................................................................Cast Iron
Cutterhead Assembly Construction..........................................................................One Piece Machined Shaft
Infeed Roller Construction.......................................................................................................Segmented Steel
Outfeed Roller Construction.........................................................................................................Polished Steel
Paint..........................................................................................................................................................Epoxy
Other
Table Locks.................................................................................................................................... Two Positive
Measurement Scale....................................................................................................................Inch and Metric
No. Of Dust Ports..............................................................................................................................................1
Dust Port Size.............................................................................................................................................. 5 in.
Mobile Base..............................................................................................................................................G7315
Other Specifications:
Country Of Origin ..............................................................................................................................................Taiwan
Warranty ............................................................................................................................................................1 Year
Serial Number Location ................................................................................. Machine Data Plate on Top of Machine
Assembly Time ...........................................................................................................................................15 minutes
The information contained herein is deemed accurate as of 10/7/2008 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.
PAGE 2 OF 3Model G5850Z
Loading...