Grizzly G0623X User Manual
MACHINE DATA
SHEET
Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901
MODEL G0623X 10" SLIDING TABLESAW
Product Dimensions:
Weight.............................................................................................................................................................. 533 lbs.
Length/Width/Height.....................................................................................................................76 x 124-3/4 x 46 in.
Foot Print (Length/Width)....................................................................................................................... 25-1/5 x 28 in.
Shipping Dimensions:
Carton #1
Type.................................................................................................................................................Wood Crate
Content..................................................................................................................................................Machine
Weight.................................................................................................................................................... 528 lbs.
Length/Width/Height...................................................................................................................46 x 42 x 44 in.
Carton #2
Type...................................................................................................................................................Cardboard
Content......................................................................................................................................................Stand
Weight.................................................................................................................................................... 117 lbs.
Length/Width/Height.............................................................................................................67 x 18-1/2 x 10 in.
Electrical:
Switch........................................................................................................Magnetic with Themal Overload Protection
Switch Voltage......................................................................................................................................................220V
Minimum Circuit Size..............................................................................................................................................30A
Plug Included............................................................................................................................................................No
Recommended Plug/Outlet Type.........................................................................................................................L6-30
Motors:
Main
Type..................................................................................................................TEFC Capacitor Start Induction
Horsepower.................................................................................................................................................5 HP
Voltage........................................................................................................................................................220V
Prewired......................................................................................................................................................220V
Phase........................................................................................................................................................Single
Amps.............................................................................................................................................................22A
Speed.................................................................................................................................................3450 RPM
Cycle..........................................................................................................................................................60 Hz
Number Of Speeds........................................................................................................................................... 1
Power Transfer ............................................................................................................................... V-Belt Drive
Bearings..........................................................................................................................Sealed and Lubricated
Main Specifications:
Operation Information
Main Blade Size......................................................................................................................................... 10 in.
Main Arbor Size.........................................................................................................................................5/8 in.
Scoring Blade Size.................................................................................................................................3-1/8 in.
Scoring Blade Arbor Size.........................................................................................................................22 mm
Main Blade Tilt...................................................................................................................................0 - 45 deg.
Main Blade Speed..............................................................................................................................4000 RPM
Scoring Blade Tilt...............................................................................................................................0 - 45 deg.
Scoring Blade Speed......................................................................................................................... 8000 RPM
The information contained herein is deemed accurate as of 10/7/2008 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.
PAGE 1 OF 3Model G0623X
Cutting Capacities
Max Depth Of Cut At 90D...................................................................................................................... 3-1/8 in.
Max Cut Cap Height...............................................................................................................................3-1/8 in.
Max Cut Thickness.................................................................................................................................3-1/8 in.
Max Depth Of Cut At 45D...................................................................................................................... 2-1/4 in.
Table With Rip Fence Max Cut Width........................................................................................................33 in.
Max Cut Cap Width..............................................................................................................................78-1/2 in.
Max Cut Length..........................................................................................................................................63 in.
Sliding Table With Cross Fence Max Cut Width..................................................................................78-1/2 in.
Sliding Table With Cross Fence Max Cut Length.......................................................................................63 in.
Miter Fence Cut Width At 45D....................................................................................................................63 in.
Table Information
Floor To Table Height........................................................................................................................... 33-5/8 in
Table Size Length...................................................................................................................................... 27 in.
Table Size Width..................................................................................................................................14-3/8 in.
Table Size Thickness...................................................................................................................................2 in.
Table Size With Ext Wings Length.............................................................................................................47 in.
Table Size With Ext Wings Width...............................................................................................................40 in.
Table Size With Ext Wings Thickness..........................................................................................................2 in.
Sliding Table Length...................................................................................................................................63 in.
Sliding Table Width..............................................................................................................................12-1/4 in.
Sliding Table Thickness.........................................................................................................................3-1/2 in.
Sliding Table T Slot Top Width..................................................................................................................5/8 in.
Sliding Table T Slot Height........................................................................................................................1/2 in.
Sliding Table T Slot Bottom Width......................................................................................................... 1-1/4 in.
Fence Information
Fence Type..........................................................................................................................Extruded Aluminum
Fence Size Length...............................................................................................................................33-1/2 in.
Fence Size Width.........................................................................................................................................2 in.
Fence Size Height..................................................................................................................................4-1/4 in.
Fence Stops......................................................................................................................................................2
Construction Materials
Table Construction............................................................................................................................... Cast Iron
Sliding Table Construction..................................................................................................................Aluminum
Base Construction.......................................................................................................................................Steel
Body Assembly Construction......................................................................................................................Steel
Cabinet Construction.................................................................................................................................. Steel
Trunnions Construction........................................................................................................................ Cast Iron
Fence Assembly Construction...................................................................Extruded Aluminum Side, Aluminum
Rails Construction......................................................................................................................Hardened Steel
Guard Construction.................................................................................................................................. Plastic
Spindle Bearing Type....................................................................................................................................Ball
Paint.......................................................................................................................................... Powder Coating
Other Related Information
No Of Dust Ports...............................................................................................................................................2
Dust Port Size....................................................................................................................................4, 2-1/2 in.
Other Specifications:
Country Of Origin ..............................................................................................................................................Taiwan
Warranty ............................................................................................................................................................1 Year
Serial Number Location ...................................................................................Machine ID Label on Front of Machine
Assembly Time ............................................................................................................................................. 1-1/2 hrs.
The information contained herein is deemed accurate as of 10/7/2008 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.
PAGE 2 OF 3Model G0623X
Loading...