Grizzly G0491 User Manual
MACHINE DATA
SHEET
Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901
MODEL G0491 16 SPEED FLOOR MODEL DRILL PRESS
Product Dimensions:
Weight.............................................................................................................................................................. 128 lbs.
Length/Width/Height............................................................................................................................. 24 x 14 x 62 in.
Foot Print (Length/Width)....................................................................................................................... 19-5/8 x 12 in.
Shipping Dimensions:
Type............................................................................................................................................................. Cardboard
Content............................................................................................................................................................Machine
Weight.............................................................................................................................................................. 132 lbs.
Length/Width/Height............................................................................................................................. 55 x 19 x 10 in.
Electrical:
Switch...................................................................................................................Toggle On/Off with Safety Lock Tab
Switch Voltage......................................................................................................................................................110V
Cord Length............................................................................................................................................................ 5 ft.
Cord Gauge....................................................................................................................................................16 gauge
Minimum Circuit Size........................................................................................................................................ 13 amp
Plug Included.......................................................................................................................................................... Yes
Motors:
Main
Type..................................................................................................................TEFC Capacitor Start Induction
Horsepower..............................................................................................................................................1/2 HP
Voltage........................................................................................................................................................110V
Prewired......................................................................................................................................................110V
Phase........................................................................................................................................................Single
Amps............................................................................................................................................................8.5A
Speed.................................................................................................................................................1725 RPM
Cycle..........................................................................................................................................................60 Hz
Number Of Speeds........................................................................................................................................... 1
Power Transfer ............................................................................................................................... V-Belt Drive
Bearings.......................................................................................................................Shielded and Lubricated
Main Specifications:
Construction
Table Construction...................................................................................................Precision Ground Cast Iron
Spindle Housing Construction..............................................................................................................Cast Iron
Column Construction....................................................................................................Cylindrical Ground Steel
Head Construction................................................................................................................................Cast Iron
Base Construction................................................................................................................................Cast Iron
Paint..........................................................................................................................................................Epoxy
Head Information
Head Swivel..........................................................................................................................................360 deg.
The information contained herein is deemed accurate as of 10/6/2008 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.
PAGE 1 OF 2Model G0491
Other Related Information
Base Length.........................................................................................................................................19-5/8 in.
Base Width...........................................................................................................................................11-3/4 in.
Quill Diameter..........................................................................................................................................2.17 in.
Depth Stop Type.............................................................................................Threaded Rod with Positive Stop
Column Diameter...................................................................................................................................2-7/8 in.
Mobile Base..............................................................................................................................................G8683
Illumination......................................................................................................................................110V Socket
Spindle Information
Spindle Taper.............................................................................................................................................MT#2
Spindle Travel......................................................................................................................................3-3/16 in.
Dist From Spindle To Column................................................................................................................6-1/2 in.
Dist From Spindle To Table................................................................................................................. 30-3/4 in.
Dist From Spindle To Base........................................................................................................................ 48 in.
Table Information
Table Diameter.....................................................................................................................................11-3/8 in.
Table Thickness.....................................................................................................................................1-1/4 in.
Floor To Table Height.............................................................................................................19-5/8 - 45-1/4 in.
Vertical Table Movement................................................................................................ Crank Handle Operate
Table Swing.......................................................................................................................................... 360 deg.
Table Tilt..........................................................................................................................Left and Right 90 deg.
Table Swivel Around Center................................................................................................................. 360 deg.
Table Swivel Around Column................................................................................................................360 deg.
Maximum Movement Of Work Table....................................................................................................25-1/2 in.
No. Of T Slots....................................................................................................................................................6
T Slot Width...............................................................................................................................................5/8 in.
T Slot Length..........................................................................................................................................3-1/4 in.
Operation Information
Swing..........................................................................................................................................................13 in.
Drilling Capacity........................................................................................................................... 5/8 in. in Steel
No Of Spindle Speeds.....................................................................................................................................16
Range Of Spindle Speeds230, 332, 376, 470, 544, 569, 653, 760, 813, 840, 1458, 1610, 1716, 2196, 2375, 3270 RPM
Drill Chuck Type....................................................................................................................... JT33 Key Chuck
Drill Chuck Size.........................................................................................................................................5/8 in.
Other Specifications:
Country Of Origin ................................................................................................................................................China
Warranty ............................................................................................................................................................1 Year
Serial Number Location ....................................................................................................... Data Label on Headstock
Assembly Time ...........................................................................................................................................45 minutes
Features:
Crank Handle Operated Rack and Pinion Vertical Table Movement
Threaded Depth Stop
Includes Built-in Light
Table and Base are Cast Iron
5/8" Chuck
The information contained herein is deemed accurate as of 10/6/2008 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.
PAGE 2 OF 2Model G0491
Loading...