Griven Jade 16 AL4050, Jasper AL4360 Instruction Manual

Jade 16

AL4050

Manuale di istruzioni

Instructions manual

INDEX

1.0 Introduction .................................................................................................................................16

1.1 Safety information.......................................................................................................................................................16

1.1.1 Protecting against electric shock ..........................................................................................................................16

1.1.2 Installation ................................................................................................................................................................16

1.1.3 Protection against burns and fire ...........................................................................................................................16

1.1.4 Weather protection..................................................................................................................................................16

1.2 Compliance ................................................................................................................................................................16

2.0 Size ...............................................................................................................................................17

3.0 Packaging and transport ...........................................................................................................17

3.1 Packaging ...................................................................................................................................................................17

3.2 Transport ......................................................................................................................................................................17

4.0 Installation ...................................................................................................................................18

4.1 Fixing ............................................................................................................................................................................18

4.1.1 Fixed Installation ......................................................................................................................................................18

4.1.2 Installation onto a mobile structure (truss) ............................................................................................................18

4.2 Adjusting light beam direction..................................................................................................................................18

4.3 Connection to mains power ......................................................................................................................................19

4.4 Connection to DMX signal .........................................................................................................................................19

5.0 Use of the unit..............................................................................................................................20

5.1 Setting operating mode .............................................................................................................................................20

5.2 Setting DMX Address ..................................................................................................................................................20

5.3 DMX functions RGBW ..................................................................................................................................................21

5.3.1 DMX functions with DMX MODE = 4 channels.......................................................................................................21

5.3.2 DMX functions with DMX MODE = 5 channels.......................................................................................................21

5.3.3 DMX functions with DMX MODE = 6 channels.......................................................................................................21

5.4 DMX functions Dynamic white...................................................................................................................................22

5.4.1 DMX functions with DMX MODE = 2 channels.......................................................................................................22

5.4.2 DMX functions with DMX MODE = 3 channels.......................................................................................................22

5.5 DMX functions monochrome.....................................................................................................................................22

6.0 Master-Slave and Automatic function......................................................................................23

6.1 MASTER configuration.................................................................................................................................................23

6.2 SLAVE configuration RGBW ........................................................................................................................................23

6.3 SLAVE configuration Dynamic white.........................................................................................................................23

7.0 Fixed colours mode....................................................................................................................24

7.1 Fixed colours mode RGBW.........................................................................................................................................24

7.2 Fixed colour mode Dynamic white...........................................................................................................................24

7.3 Monochromatic fixed colour mode .........................................................................................................................24

7.4 SLAVE configuration RGBW ........................................................................................................................................24

7.5 SLAVE configuration Dynamic white.........................................................................................................................24

7.6 SLAVE configuration monochromatic.......................................................................................................................24

8.0 Thermal protection .....................................................................................................................25

9.0 No frost glass ...............................................................................................................................25

10.0 Maintenance.............................................................................................................................25

10.1 Cleaning the unit ......................................................................................................................................................25

10.2 Regular checks .........................................................................................................................................................25

11.0 Spare parts ................................................................................................................................25

12.0 RDM functions............................................................................................................................26

13.0 Disposal......................................................................................................................................26

14.0 Troubleshooting.........................................................................................................................27

15.0 Technical specifications ..........................................................................................................27

16 English

1.1 Safety information

1.1.1 Protecting against electric shock

• Disconnect the unit from mains supply before servicing it or performing any other action.

• Always ground/earth the unit electrically.

• Before connecting the unit to power supplies, verify that operating voltage and frequency are compatible.

• Do not handle the unit with wet hands or in the presence of water.

• Check regularly that the power supply cable is not damaged or crushed.

• Apply to a qualified technician for any regular maintenance action not described in this manual.

1.1.2 Installation

• Fix the unit with screws, hooks or any other support able to bear the weight of the unit itself.

• The unit installation actions must be performed by a qualified staff.

1.1.3 Protection against burns and fire

• Suitable to be installed onto normally inflammable surfaces.

• The unit is not to be installed in places where the ambient temperature exceeds 50° (122°F).

1.1.4 Weather protection

The unit is classified as device with an IP66 weather protection rate.

1.2 Compliance

• Product in compliance with EN60598-1 EN60598-2-17.

• Product in compliance with 2002/95/CE (RoHS).

1.0 Introduction

Warning!

This unit is suitable for professional use only, not for domestic use.

English 17

3.1 Packaging

Check carefully the content of the box and, in case of damage, contact your forwarder immediately. The fol­lowing items are included in the box of this unit:

n° 1 Jade unit
n° 1 owner’s manual
n° 2 connection kit

3.2 Transport

It is recommended to transport the unit with the maximum care, by using its original packing, to avoid to

damage the unit.

2.0 Size

116mm

4,57”

114mm

4,47”

194mm

7,62”

8

m

m

0

,

3

1

”

9

mm

0

,

3

3

”

19mm

0,76”

114mm

4,47”

160mm

6,30”

3.0 Packaging and transport

Warning!

• Griven S.r.l. liability will cease upon consignment of goods to the forwarder: claims for damage due to trans­port must be addressed directly to the forwarder.

• Griven S.r.l. will accept claims for broken or missing goods only within seven days of receipt of the goods.

• Returns of equipment will not be accepted without prior authorization granted by Griven S.r.l. and if not duly ac­companied by relevant shipping documents.

4.1 Fixing

The unit can be used both rested on floor and fixed onto a structure. The unit can operate in any position.

4.1.1 Fixed Installation

Use the three holes Ø12.5 (1/2”) in the bracket to fix the unit.

4.1.2 Installation onto a mobile structure (truss)

To fix the unit onto a supporting structure or truss, it is suggested
to use hooks “4” type “Aliscaff”. The hooks are to be fitted to the
unit through the holes in the bracket, as shown in the picture.

4.2 Adjusting light beam direction

1. Untighten the lateral screw “2”.

2. Rotate the bodies of the unit towards desired direction and
tighten the screw “2”.

4.0 Installation

8

m

m

0

,

3

1

”

9

mm

0

,

3

3

”

19mm

0,76”

4

5

18 English