Griots Garage 6"" Random Orbital Owner's Manual

6" rAndom orbiTAl

Spectacular Results That Are Quick & Safe

SPECIFICATIONS
Motor: 7 Amps, 850 Watts
Power Supply 120 Volts, 60 Hz
Orbits/Minute: 2,500 - 6,800
Pad Size: 6"
Orbit Diameter:

5

⁄16"

T

hAnk You For Choosing This QuAliTY

g

rioT's gArAge ProduCT

Your 6" Random Orbital has been engineered and manu­factured to meet G
ability, ease of operation and operator safety. When properly
cared for, it will give you years of trouble-free performance.

CAUTION: CAREFULLY READ THROUGH THIS
ENTIRE OWNER'S MANUAL BEFORE USING
YOUR RANDOM ORBITAL.

Pay close attention to the Useful Information for Safe
Operation, Warnings, and Cautions.
Orbital properly and only for what it is intended, you will
enjoy years of safe, reliable service.

Have fun in your garage!

.

riot's GaraGe's

®

high standards for depend-

If you use your Random

Owners Manual

1

u

seFul inFormATion For sAFe oPerATion

Please follow the safety instructions below to avoid possible
dangers. The safety symbols and the explanations with them
require your careful attention and understanding. The safety
warnings do not by themselves eliminate any danger. The
instruction or warnings they give are not substitutes for prop­er accident prevention measures.

SAFETY ALERT SYMBOL: Indicates caution or warn­ing. May be used in conjunction with other symbols
or pictures.

WARNING: Failure to obey the safety warnings can
result in serious injury to yourself or to others. Always
follow the safety precautions to reduce the risk of fire,
electric shock and personal injury.

5. AlwAYs weAr sAFeTY glAsses.

Everyday eyeglass­es have only impact resistant lenses, they are not safety
glasses.

6. ProTeCT Your lungs.

Wear a dust mask if opera-

tion is dusty.

7. ProTeCT Your heAring.

Wear hearing protection

during extended periods of operation.

8. don'T overreACh.

Keep proper footing and balance
at all times. Do not use tool on a ladder or unstable sup­port. Secure tools when working at elevated levels.

9. remove AdjusTing keYs And wrenChes.

a habit of checking to see that keys and adjusting
wrenches are removed from tool before turning it on.

Make

WARNING: Do not attempt to operate this unit until
you have read and understood safety rules. Failure to
comply can result in accidents involving fire, electric
shock or serious personal injury. Save the owner's
manual and review frequently to continue safe
machine operation.

CAuTion: AlwAYs weAr eYe
& e

Ar ProTeCTion wiTh AnY

P

ower Tool.

The operation of any tool can result in
foreign objects being thrown into your
eyes, which can result in severe eye
damage. Before beginning power tool
operation, always wear safety goggles or
safety glasses with side shields and a full
face shield when needed.

1. know Your Power Tool.

al carefully. Learn the applications and limitations as well
as the specific potential hazards related to this tool.

2. Avoid dAngerous environmenTs.

power tools in damp/wet locations or expose to rain.
Keep work area well lit.

Read this owner's manu-

Don't use

10. keeP hAndles drY, CleAn And Free From oil
And greAse.

Always use a clean cloth when cleaning.
Never use brake fluids, gasoline, petroleum based prod­ucts or any strong solvents to clean your tool.

11. CheCk dAmAged PArTs.

Before further use of the
tool, a guard or any other part that is damaged should
be carefully checked to determine that it will operate
properly and perform its intended function. Check for
alignment of moving parts, binding of moving parts,
breakage of parts, mounting and any other conditions
that may affect its operation. Any part that is damaged
should be properly repaired or replaced.

12. do noT use Tool iF swiTCh does noT Turn
iT on And oFF.

13. do noT oPerATe This (or AnY) Tool while
under The inFluenCe oF drugs, AlCohol or
AnY mediCATion.

14. grioT's gArAge is noT resPonsible For AnY
misuse oF The rAndom orbiTAl For AnY
injurY or dAmAge inCurred To AnY Person
or objeCT relATed To The rAndom orbiTAl.

3. sTore idle Tools.

When not in use, tools should be

stored in a cool, dry place.

4. dress ProPerlY.

Do not wear loose clothing or
jewelry. They can be caught in moving parts. Rubber
gloves and non-skid footwear are recommended when
working outdoors. Also wear protective hair covering to
contain long hair.

2

15. Your orbiTAl should never be ConneCTed
To Power suPPlY when You Are Assembling
PArTs, mAking AdjusTmenTs, or rePlACing
PAds, CleAning or when noT in use.

16. be CAreFul noT To leT Your hAnd
ComPleTelY Cover Air venTs.

F

eATures And CAuTions

Your Random Orbital is suitable for use with G

riot's GaraGe

car care products. It will produce a swirl-free finish. Use it
with any of our Machine Polishes, Waxes, Sealants, Glaze and
many other products as indicated on each product's label.

Before attempting to use your orbital, familiarize yourself
with all operating features and safety requirements.

Power swiTCh

The power switch is located on the top of the orbital. Slide the
switch forward to turn it on. Press down on the back of the
switch to turn it off.

sPeed ConTrol diAl

The variable speed control dial is located at the back of the
unit just above the power cord. To adjust the speed simply
rotate the dial to the desired setting. For polishing and paint
sealant application speed setting 4 to 5 is recommended. For
waxing speed setting 2 to 3 is recommended.

AdjusTAble looP hAndle

The loop handle is adjustable to help you find the optimum
hand position. To adjust the handle simply loosen the Allen
bolts located at the base of the handle with the supplied Allen
wrench. Once you set the position of the handle, tighten
the Allen bolts until snug being careful not to over tighten
the bolts. C

AuTion

: Never adjust the loop handle while the

machine is running. Damage or injury may occur.

insTAlling 6" FoAm PAds

•

Inspect polish and/or wax pad before installing.

DO NOT use torn or worn out pads.

•

Unplug your orbital.

•

Center pad on backing plate and press firmly around pad.

For ease of operation, your orbital has a loop handle for two­handed operation, which helps to maintain proper control.
During operation, always use both hands.

Hold your orbital in front and away from you, keeping it
clear of the vehicle. Start your orbital by holding the pad
against the surface to be polished or waxed and sliding the
switch forward.

s

oFT

, r

ubberized

riP on The

g
A

djusTAble hAndle

e

AsY ACCess

, s

oFT-sTArT

onsTAnT sPeed swiTCh

C

m

d

omed

, r

ubberized PAlm griP

F

inger griP noTCh For beTTer ConTrol

d

uAl-ACTion

2,500 - 6,800 o

,

olded hAnd griPs For beTTer ConTrol

rbiTs/minuTe

P

owerFul

, 850w m

oTor

v

AriAble sPeed ConTrol

Owners Manual

3