Grindmaster 625, 650 User Manual

600 Series Espressimo

™

Series

Espresso Coffee Grinders

Instruction Manual for Models 625 and 650

Grindmaster® Coffee Grinders and Brewers • Espressimo® Espresso Machines • Crathco® Hot Beverage Dispensers

Crathco® Cold and Frozen Beverage Dispensers • American Metal Ware® Coffee and Tea Systems

Tel [phone] • Fax [phone] • Toll-Free 1-800-695-4500

P. O. Box 35020 • Louisville, KY 40232 • USA

www.grindmaster.com • email: [e-mail]

©Grindmaster Corporation, 1995
Printed in USA 0804 Form# ES-365-04

Model 625

Model 650

600 SERIES ESPRESSO GRINDERS

INSTRUCTION MANUAL

WARNING - UNPLUG GRINDER FROM
OUTLET BEFORE SERVICING OR
ADJUSTING

1) Bean Hopper Lid

2) Bean Hopper

3) Grind Adjustment Dial

4) Dosing Chamber

5) Dosing Lever

6) Filter Holder Guide

7) On/Off Switch

INSTALLATION

1. Place bean hopper on grinder base

2. Press grind adjustment tab down

3. Turn grind adjustment dial clockwise until grinding burrs touch

4. Turn dial back counterclockwise five notches

5. The grinder should now be set to the correct grind (slight adjustment may
be necessary)

6. Place whole bean coffee in hopper

7. Plug grinder into grounded outlet

8. Turn power switch on

9. Open bean hopper shutoff by pulling out bean hopper shutter

10. If grinder does not start grinding, grind may need to be adjusted to a coarser
setting by turning the adjustment dial counterclockwise

HOW TO OPERATE

1. Remove bean hopper lid

2. Fill bean hopper with whole bean coffee

3. Turn the grinder “on” to fill the doser with ground coffee
For the Model 625, turn the grinder “off” when the doser is filled
For the Model 650, leave the switch in the “on” position — The grinder will
automatically turn on and refill the dosing chamber when the sensing switch
senses it is low

4. Place the filter holder under the doser outlet until it rests at the filter stop

1

2

4

5

6

7

3