www.Griffin-Stands.com
Padded Drum
Throne Stool
www.Griffin-Stands.com
www.Griffin-Stands.com
Griffin™ stands and accessories are manufactured
in several innovative factories responsible for
developing products that address the newest
needs and trends of the current market. We take
pride in the Griffin™ brand and endeavor to be on
the forefront of the musical stands and musical
and lighting accessoriesmarket.
Performance Issue, Uneven or Unstable- Make
sure all nuts and bolts are tight on the product. If they
are, then loosen all nuts and bolts 1 full turn counterclockwise, then go back and tighten each bolt only ½
turn tight. Then do a final tighten turn for another ½
turn tight. Next, Make sure there are not any missing
nuts or bolts. Third, ensure all parts on the product
are not broken or defective. Finally, Re-read the
assembly instructions or watch the product
demonstration video to ensure you have correctly
assembled or are using the product properly with
factory specifications.
Missing Parts- The pictures, videos and images
shown in this manual might have changed style or
count due to the product being redesigned. So in rare
cases the part may no longer be included or of a
different style. However, if you think you are missing
a part that is necessary to the assembly and use of
your product, then first carefully double check all
packaging for any parts you think are missing. Some
parts might be hiding in the packaging or loose in an
inner box.
Us er M an ua l
M od el # T 1 00
Griffin | 11408 Hwy 64 W, Tyler, TX 75704 |
info@griffin-stands.com | www.Griffin-
Stands.com
For current product specifications, please to go
www.griffin-stands.com and type the model number
into the search bar. Locate the product listing to view
the current factory specifications.
Thank you for purchasing the Griffin Padded Drum
Throne Stool. Your product comes with a 1 year
factory warranty from purchase date. Please read all
assembly instructions prior to assembling your new
cart. Pictures that may aid in assembly can be found
by going to www.griffin-stands.com and typing T100
into the search bar.
Step 1 – Take the main stand with the legs, flip
it, loosen the knob and spread the legs using
two hands. Use the locking knob and turn to
tighten in place. (See Figure 1). Flip the stand
and make sure that the legs are flat on the floor.
Step 2 – Take the middle chrome part and use the
locking knob and insert it into one of the holes,
this will act as the height maintenance of the
drum throne as shown in Figure 2. After that
insert the middle pipe and knob should be aligned
and inserted in the cut out of the main stand.
Please scan the QR Code below for the product
demonstration video. Or go to the URL shown here and find
the product video. www.Griffin-Stands.com/Videos
Step 3 – Take the padded seat and slide the hole
into the middle pipe and use the knob to tighten
the seat in place. (See Figure 3)
Step 4 – For safety reasons, please always make
sure to test the stability and safety of the product
before use. Double check all nuts and bolts, knobs
and connectors, make sure that these are tight
and securely fastened before use of your product.
Test the product under light use or light loads the
first time to confirm assembly and structure of the
product is correct.
***Please note that the seat can swivel left to
right and vice versa by turning the knob below the
seat loose, however, please keep in mind that this
may cause the seat to come off.
Loading...