Griffin Technology RS657 User Manual

www.Griffin-Stands.com

Rack Mount

Stand

www.Griffin-Stands.com

www.Griffin-Stands.com

Griffin™ stands and accessories are manufactured
in several innovative factories responsible for
developing products that address the newest

needs and trends of the current market. We take

pride in the Griffin™ brand and endeavor to be on
the forefront of the musical stands and musical
and lighting accessoriesmarket.

Performance Issue, Uneven or Unstable- Make

sure all nuts and bolts are tight on the product. If they
are, then loosen all nuts and bolts 1 full turn counter­clockwise, then go back and tighten each bolt only ½
turn tight. Then do a final tighten turn for another ½
turn tight. Next, Make sure there are not any missing
nuts or bolts. Third, ensure all parts on the product
are not broken or defective. Finally, Re-read the
assembly instructions or watch the product
demonstration video to ensure you have correctly
assembled or are using the product properly with
factory specifications.

Missing Parts- The pictures, videos and images

shown in this manual might have changed style or
count due to the product being redesigned. So in rare
cases the part may no longer be included or of a
different style. However, if you think you are missing
a part that is necessary to the assembly and use of
your product, then first carefully double check all
packaging for any parts you think are missing. Some
parts might be hiding in the packaging or loose in an
inner box.

User Manual

M od e l # RS 6 57

Griffin | 11408 Hwy 64 W, Tyler, TX 75704 |

[e-mail] | www.Griffin-

Stands.com

For current product specifications, please to go

www.griffin-stands.com and type the model number

into the search bar. Locate the product listing to view
the current factory specifications.

Thank you for purchasing the Griffin Rack Mount
Stand. Your product comes with a 1 year factory
warranty from purchase date. Please read all
assembly instructions prior to assembling your new
cart. Pictures that may aid in assembly can be found
by going to www.griffin-stands.com and typing RS657
into the search bar.

Step 3 – For safety reasons, please always make sure
to test the stability and safety of the product before
use. Double check all nuts and bolts, knobs and

connectors, make sure that these are tight and

securely fastened before use of your product. Test
the product under light use or light loads the first
time to confirm assembly and structure of the
product is correct.

Step 1 – Take the back horizontal piece and use the
bolt to screw to the inner bottom part of the rack

mount stand. (See Figure 1) Hand tighten the nuts and

bolts first then use an allen wrench to tighten the bolts
all the way. Make sure to even the tightness on both
bolts. Over tightening on one side may cause tension
and may make the stand uneven.

Please scan the QR Code below for the product
demonstration video. Or go to the URL shown here and find
the product video. www.Griffin-Stands.com/Videos

Step 2 – Provided rack screws in the package is used to
mount your equipment (See Figure 2). The screws will

screw in the threaded holes on the rack rails. When

your equipment is mounted together, there may or
may not be spacing between eachunit.

***Please note that heavier equipment is suggested
to be mounted at the bottom part of the stand for a
more stable and secure stand. Spaces between
equipment is normal. And by design, the stand is
tilted back at an angle for a more user friendly and

easy access to the equipment.