Griffin Technology 4015TRIP User Manual

MANUAL

Thank you for purchasing the iTrip, the only wireless FM transmitter made

specifically for the iPod. Now you can play your music in your car or anywhere

there's an FM radio. We'll have you up and running in three easy steps.

iTRIP QUICK START (Mac)

Insert the included iTrip CD-Rom into your Mac.

1

Launch and run the iTrip Installer. All necessary files

are now installed into iTunes.

2

Connect and sync your iPod with iTunes. This will

transfer the newly created iTrip Stations playlist and

files into your iPod.

3

Properly disconnect the FireWire cable and firmly

attach the iTrip into the headphone jack of the iPod.

Playing music through the iTrip automatically turns

the iTrip on. The LED will blink as it's powering up.

The iTrip is preset to 87.9 on your FM radio. To select

your own station, follow the instructions that

continue inside this booklet.

iTRIP QUICK START (PC)

Insert the included iTrip CD-Rom into your PC. The iTrip

1

Installer should begin automatically. If this does not happen,

simply run the Setup.EXE file located on the iTrip CD-Rom.

This will install all necessary files into MusicMatch or iTunes.

2

Connect and sync your iPod with MusicMatch or iTunes.

This will transfer the newly created iTrip Stations playlist and

files into your iPod.

Properly disconnect the FireWire cable and firmly attach

3

the iTrip into the headphone jack of the iPod. Playing music

through the iTrip automatically turns the iTrip on. The LED will

blink as it's powering up.

The iTrip is preset to 87.9 on your FM radio. To select your own

station, follow the instructions that continue inside this booklet.