GRIFFIN iTalk Pro User Manual
Pro
ıTalk
Stereo microphone for CD-quality recording on iPod
Thank you for purchasing iTalk Pro, the easiest
way to record your thoughts (or anything else)
onto your iPod. Here’s how to get started:
1. Attach iTalk Pro to your iPod via the dock
connector. The ring around iTalk Pro’s big
round button will light up and start flashing.
On the iPod display, you will see the Voice
Memo screen.
2. To start a recording, press the iTalk button.
The ring around the button will flash, then
stay lit while recording is in progress.
3. To end a recording, press the button again.
The ring will flash while the file is being
saved.
Select Stereo or Mono recording mode from
the iPod’s voice memo menu. With iTalk Pro
attached, go to [Main iPod Menu]->[Extras]
>[Voice Memos]. Using the “Quality” option you
can set iTalk Pro to record in Stereo [High] or
Mono [Low].
To adjust the recording level, hold the iTalk
Pro button for 3 seconds and release. You will
see a menu on the iPod’s screen. Press and
release the button until the option you want is
selected. To confirm your selection, hold the
button for 3 seconds and release. Your
recording level will be set.
You can use external microphones with iTalk
Pro. Just plug your mic into the 3.5mm jack
on the bottom of iTalk Pro. Note that some
microphones require their own, separate
power source (sometimes referred to as
“phantom power”). To use such a mic with
iTalk Pro, simply plug it into iTalk Pro through
an appropriate pre-amp.
To find your recordings on your iPod, go to the
“Extras” menu, and look under “Voice
Memos.” When you sync with iTunes, iTunes
will ask you if you want to copy the new voice
memos to your iTunes Library. If you answer
Yes, your recordings will be removed from the
iPod (freeing up space) and will be copied to
your iTunes Library as WAV files.
Tech Specs
16-bit stereo audio at 44.1 kHz
8-bit mono at 22 kHz
3.5mm stereo input jack
Power: Supplied by iPod connection
Compatibility: 5th Generation iPod with video
Visit Griffin’s online support at
http://www.griffintechnology.com/support/
This device complies with Part 15 of the FCC Rules.
Griffin Technology
9734-ITALK30
© 2006 Griffin Technology - www.griffintechnology.com - Patent Pending - Made in China - Invented in Tennessee
P560 iTalk30 QSGuide
08/11/06 3:30am
KMS
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
iTalk Pro is a trademark of Griffin Technology, Inc. - iPod is a trademark of Apple Computer, Inc.
Loading...