Grieve Corporation S7820 Installation Manual

65-0095-2

7800 SERIES

S7820 Remote Reset Module

PRODUCT DATA

FEATURES

• Capability to reset 7800 SERIES Relay Module from a remote location.

• Reset button can be installed up to 1000 feet away.

• Can be installed directly onto the front of a 7800 SERIES Relay Module.

NOTE: Many jurisdiction restrict remote resetting of any

appliance and require a location that provides lineof-sight viewing of the appliance. Install the S7820 Remote Reset Module in accordance with local requirements.

APPLICATION

The 7800 Series is programmed to provide a level of safety, functional capability and features beyond the capacity of conventional controls. Functions provided by the 7800 Series include automatic burner sequencing, flame supervision, system status indication, system or self diagnostics and troubleshooting.

The S7820 Remote Reset Module serves as a link between a remote reset switch and the Relay Module. Similar to the S7800 Keyboard Display Module, it allows the 7800 SERIES Burner Control to be reset from a remote switch, but provides none of the other Keyboard Display Module or Data Controlbus Module™ features.

Contents

Application............................................................................. 1

Features ................................................................................ 1

Specifications ........................................................................ 2

Ordering Information ............................................................. 2

Installation ............................................................................. 2

Checkout ............................................................................... 3

7800 SERIES S7820 REMOTE RESET MODULE

SPECIFICATIONS

Electrical Connectors (included):

Part no. 203541 ControlBus 5-Wire Electrical Connector,.

Environmental Ratings:

Ambient Temperature:

Operating: -40°F to 140°F (-40°C to 60°C). Storage: -40°F to 150°F (-40°C to 66°C).

Humidity:

Operating: 85% RH continuous, noncondensing.

Vibration: 0.5 G environment.

Dimensions:

See Fig. 1.

Weight:

3 ounces (86 grams) unpacked.

BURNER CONTROL

2-3/4 (69)

29/32

4-27/32

M1986A

Fig. 1. Remote Reset Module dimensions in in. (mm).

(123)

5/32 (4)

(23)

INSTALLATION

When Installing this Product…

1. Read these instructions carefully. Failure to follow them

could damage the product or cause a hazardous condition.

2. Check the ratings given in the instructions and marked

on the product to make sure the product is suitable for the application.

3. The installer must be a trained, experienced, flame

safeguard control technician.

4. Disconnect the power supply before beginning

installation to prevent electrical shock and equipment damage. More than one power supply disconnect may be involved.

5. Wiring must comply with all applicable codes,

ordinances and regulations.

6. After installation is complete, check out the product

operation as provided in these instructions.

Humidity

Install the S7820 Remote Reset Module where the relative humidity never reaches the saturation point. The S7820 Remote Reset Module is designed to operate in a maximum 85% relative humidity (RH) continuous, noncondensing, moisture environment.

Vibration

Do not install the S7820 Remote Reset Module where it can be exposed to vibration in excess of 0.5G continuous maximum vibration.

ORDERING INFORMATION

When purchasing replacement and modernization products from your TRADELINE® wholesaler or distributor, refer to the TRADELINE® Catalog or price sheets for complete ordering number.

If you have additional questions, need further information, or would like to comment on our products or services, please write or phone:

1. Your local Home and Building Control Sales Office (check white pages of your phone directory).

2. Home and Building Control Customer Logistics Honeywell, 1885 Douglas Drive North Minneapolis, Minnesota 55422-4386

3. www.honeywell.com/bbc

In Canada—Honeywell Limited/Honeywell Limitée, 35 Dynamic Drive, Scarborough, Ontario M1V 4Z9. International Sales and Service Offices in all principal cities of the world. Manufacturing in Australia, Canada, Finland, France, Germany, Japan, Mexico, Netherlands, Spain, Taiwan, United Kingdom, U.S.A.

65-0095—2

+ 2 hidden pages