Greystone Energy Systems TE511 Series, TE512 Series Catalog Page

TEMPERATURE TRANSMITTERS

C/W LCD DISPLAY

TE511/512 Series

Precision temperature
control/sensing

FEATURES:

• Precision RTD sensing element

• Choice of scaled ranges and outputs

• LCD available in either ˚C or ˚F

• Hinged ABS weatherproof enclosure

Peace of mind

through reliable

temperature monitoring

GREYSTONE HAS AN ISO 9001 REGISTERED QUALITY SYSTEM

SPECIFICATIONS :

Sensor....................................................................... 1000 Ω Platinum, IEC 751, 385 Alpha, thin lm

Sensor Accuracy....................................................±0.3˚C (±0.54˚F) @ 0˚C (32˚F)

Transmitter Output Signal.................................4-20mA current loop, 0-5 vdc, or 0-10 Vdc (factory congured)

Transmitter Accuracy .......................................... ±0.1% of span, including linearity

4-20 mA loop Power Supply.............................15-35 Vdc or 22-32 Vac

Minimum Loop Current .....................................2 mA nominal (occurs with shorted sensor)

Maximum Loop Current..................................... 22.5 mA nominal (occurs with open sensor)

Maximum Loop Load.......................................... >600 ohms

0-5 Vdc Power Supply .........................................10-35 vdc or 10-32 Vac

0-10 Vdc Power Supply....................................... 15-35 Vdc or 15-32 Vac

Maximum Current (Voltage)............................. 5 mA nominal

Maximum Output (Voltage) .............................Limited to <5.5 Vdc for 0-5 Vdc, <10.5 for 0-10 vdc

Input Voltage Eect .............................................Negligible over specied operating range

RFI rejection............................................................ Good RFI rejection of normal frequencies with standard installation

Protection Circuitry..............................................Reverse voltage protected and output limited

Probe Sensing Range.......................................... B, C, E, ES & G: -20 - 105˚C (-4 - 221˚F)

D, DR & FD: -20 - 60˚C (-4 - 140˚F)
DC: -40 - 100˚C (-40 - 212˚F)
F: 0 - 70˚C (32 - 158˚F)

Ambient Operating Range................................ 0 - 70˚C (32 - 158˚F)

Operating Humidity............................................ 0-95% RH non-condensing

Probe Material....................................................... B, C, DR, E, & FL: 6.35 mm (0.25”) O.D., 304 series stainless steel

D & DC: 7.94 mm (0.3125”) O.D. soft copper
FD: FT-6 rated plenum cable
ES: 2” x 2” aluminum plate
G: 0.5” x 0.5” x 2” aluminum wafer

Wire Material.......................................................... B, C, DR, E, ES & G: PVC insulated, parallel bonded, 22 AWG

D, FD & FL: FT-6 rated plenum cable, 22 AWG
DC: PTFE insulated, 22 AWG

Wiring Connections............................................. Screw terminal block (14 to 22 AWG)

Enclosure................................................................. Hinged Weatherproof - ABS - UL94-5VB - IP65 (NEMA 4X)

Display Units ..........................................................˚C or ˚F (factory congured)

Display Range........................................................ 3 Digit for -88.8 to 888 as necessary

Display Size............................................................. 24 mm x 11 mm (0.95” x 0.45”), three digit.

ENCLOSURE DIMENSIONS:

THERMOWELLS:

HEX STOCK:1” HEX for 1/2” NPT

Process Thread: 1/2” NPT

6.6 mm

0.260"

STEM LENGTH (SEE CHART)

44.45 mm

1.75"

12.7 mm

0.500"

6.35 mm

0.25"

64 mm

(2.5” )

145 mm

(5.7 “)

NOTE:

6” and up machined thermowells
have a two step stem as shown.
welded construction have a 9.5
mm (0.375”) diameter

63.5 mm

2.5"

1/2" NPSM

15.9 mm

0.625”

Diameter

114.3 mm
(4.5”)

100 mm

(3.95 “)

88.9 mm

THERMOWELL PART NUMBERING SYSTEM

SERIES

NUMBER

NPT THREAD

SIZE

T1

EXAMPLE: T1 1/2 P 4
4" 304 STAINLESS THERMOWELL
WITH 1/2" NPT PROCESS THREAD

1/2"

MATERIAL

P - 304 SS
R - 316 SS

STEM

LENGTH

2"
4"
6"

8"
12"
18”

(3.5”)

CONSTRUCTION

- MACHINED
W - WELDED

(12” and up only)