Greystone Energy Systems TE200 Series Catalog Page

PROBE TEMPERATURE SENSORS

TE200 Series

Precision temperature
control/sensing

FEATURES:

• Thermistor or Precision RTD

• Various congurations available

• Selection of enclosures

• Custom laser etching available

Peace of mind

through reliable

temperature monitoring

GREYSTONE HAS AN ISO 9001 REGISTERED QUALITY SYSTEM

TE200 - PROBE TEMPERATURE SENSOR CONFIGURATIONS

FEATURES:

The TE200 temperature sensors oer a choice of precision platinum or nickel RTD’s, or NTC Thermistors which can be
with a computerized monitoring or control system. A wide variety of congurations are available such as:

B & BB) Duct Sensor – The B & BB is for single point monitoring. Both are available with various probe lengths. The B has various enclosures available and
the BB provides a mounting bracket for installation.

B) BB)

C & AP) Immersion Sensor – The C comes in two congurations. It has either spring loaded or non-spring loaded probes and has a 1/2” NPT tting to be

mounted into a thermowell. It is available in various lengths and enclosures styles. The AP is a non-spring loaded probe with a 1/2” NPT tting to be mounted in a
thermowell.

interfaced

C)

FD, D, DC & DR) Duct Averaging Sensor – All models incorporate numerous sensors along the assembly and act as a single sensor averaging the

temperature across the sensors. They are available in various lengths. The FD probe is constructed of FT-6 rated plenum cable which allows for easy
installation. The D & DC probes are constructed of bendable soft copper and the DR is a constructed of rigid stainless steel. Various enclosures are available.

AP)

FD) D & DC) DR)

E) & ES) Strap-on Sensor – The E comes with stainless steel probe and is available in several lengths and 1.5 m (5’) of cable for remote mounting. The ES has

an aluminum plate with an expandable 10” clamp assembly to strap directly to a pipe. Various enclosures are available.

E)

F, FE, & FX) OSA Sensor – Comes in an aluminum LB (F) or ABS (FE/FX) enclosure. The LB is c/w 1/2” NPT tting for connection to conduit. All incorporate a

sun/wind shield to protect the sensor.

F)

FE) FX)

ES)

G) Glass – The sensor is encapsulated in a

1/2” square x 2” aluminum wafer that can
be axed to any surface. It comes with 5’
of zip cable.

G) H)

FL) Flying Lead – The sensor is encapsulated in

a 2” S/S probe with 6’ of FT-6 rated cable and
can be used in almost any application where
temperature monitoring is required.

FL)

H) Stack – Is designed for installation in an

exhaust stack to measure ue gas temperature.
Comes standard with a mounting ange and
weatherproof enclosure