ASSEMBLY INSTRUCTIONS
SAFETY FIRST!!!!!
Twin/Twin Bunk Bed
All of our Bunk beds were designed and manufactured with your child’s safety as our top priority. Their unparalleled
strength is a bi-product of the safety design. Our bunk beds comply with all the ASTM F 1427-13
“Standard Consumer Safety Specification for Bunk Beds” and code of Federal Regulations (CFR) 1213 “Safety Standards
for Entrapment Hazards in Bunk Beds” and (CFR) 1513 “Requirements for Bunk Beds”.
Safety is a cooperative effort between us as the manufacturer, and as a guardian. Please read and consider the warnings listed
below when choosing a mattress and discussing rules of use with your child.
SAFETY WARNINGS
1. Follow the information on the warning labels appearing on the upper bunk end structure and on the carton.
Do not remove warning label from bed.
2. Always use the recommended size mattress or mattress support, or both, to help prevent the
likelihood of entrapment or falls.
3. Surface of mattress must be at least 5 inches (127mm) below the upper edge of guardrails.
4. Do not allow children under 6 years of age to use the upper bunk.
5. Prohibit more than one person on top bunk.
6. Periodically, check and ensure that the guardrail, ladder , and other components are in their proper
position, free from damage, and that all connectors are tight.
7. Do not allow horseplay on or under the bed and prohibit jumping on the bed.
8. Always use ladder for entering and leaving the upper bunk.
9. Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
10. Use of a night light may provide added safety precaution for child using the upper bunk.
11. Always use guardrails on both long side of the upper bunk. If bunk bed will be place next to the
wall, the guardrail that runs the full length of the bed should be placed against the wall to prevent
entrapment between the bed and the wall.
12. The use of water or flotation mattress is prohibited.
13. Keep these instructions for future reference.
STRANGULATION HAZARD
-Never attach or hang items to any part of the bunk bed that are not designed
for use with the bed; for example, but not limited to, hooks, belts and jump ropes.
SIZE OF MATTRESS AND FOUNDATION
Use only Twin or Full Mattress with the following specifications on upper & lower bunks
Twin Mattress :37 1/2” - 38 1/2” Wide x 74”-75” long
Full Mattress :52 1/2” - 53 1/2” Wide x 74”-75” long
Ensure thickness of mattress and foundation combined does not exceed 9 inches and the mattress is
at least 5 inches below the upper edge of guard rails.
******Replacement parts, including additional guardrails, may be obtained from any
dealer or directly from us at the below address.
Twin/Twin Bunk Bed
A 16
1/4 X 3 ½”
B 06
1/4 X 3”
C 14
1/4 X 2 1/4”
F 26
1 1/4”
G 04
3 1/2”
H 22
1 3/4”
D 16
E 01
We will replace any component part free of charge for 1
component part for 50% of the then prevailing retail price plus freight for the lifetime of The product un less the product has
been discontinued from our line.
full year via UPS freight collect.
In
addition, we will replace any
02
08
01
08
03
03
05
05
09
11
11
11
11
06
07
12
04
10
04
01
1
H
H
H
H
04
(X02)
03
(X02)
07
(X02)
H
(X04)
11
06
(X02)
H
H
H
H
2
C
C
C
11
11
C
09
11
C
10
C
11
C
C
3
A
A
D
D
01
A
A
D
D
04
03
4
G
G
G
04
G
5
03
D
D
F
F
01
A
A
F
A
A
05
F
F
6
A
02
A
A
D
D
A
7
D
D
04
03
B
B
D
D
07
A
A
07
12
B
B
A
A
8
F
F
05
F
F
F
F
9
B
B
06
06
10
DETAIL
F
F
11
C
C
C
C
C
C
12
08
F
F
F
F
F
F
08
13
Pre-Assembled 3 Drawer Unit
OPTIONAL
Simply Slide Under The Bunk.
Drawer face may vary depending on the model
Loading...