MOTION CHAIR
ASSEMBLY INSTRUCTION
SEAT
AA
1PC
LOCK WASHER
EE
M8x8.5MM
4PCS
BB
FF
BASE
1PC
NUT
2PCS
SCREW
CC
M8x45MM
4PCS
ALU PLATE
GG
2PCS
DD
FLAT WASH ER
M8x16 . 5 MM
4PCS
WRENCH
HH
1PC
This page lists all the contents included in the
box. Please take the time to identify the hardware
as well as the time to individual components to
this product. As you unpack and prepare for
assembly, place the contents on a carpeted or
padded area to protect them from damage.
1
11
Remove all protective packing material and position base on floor.
Attach the seat(A) onto the base(B) with Alu plate(G) as the picture,
then using screws(C), flat washers(D), lock washers(E) and nuts(F).
Be sure to the arrows face to front. Tighten all the bolts and nuts.
Test the swivel rocker gently. If the rocker does not rock properly,
double check the assembly procedure especially.
A
B
A
B
H
F
D
E
C
Cleaning & Care
Treat surface with care. Surface is resistant to scratches but is not scratch resistant.
Clean surfaces with a dry or damp soft doth. Do not use abrasive cleaners. Hardware
may loosen over time. Periodically check that all connections are tight.
2
Loading...