GREINER Scheel-mann, 0815502, Scheel-mann LR Mounting And Operating Manual

made by

2 / 16

- Mounting and operating manual

© 2018 GREINER GmbH

081_instruction

-manual_EN0815502_rev_0.docx

Mounting and operating manual

Item No.: 0815502

Last updated: 17.05.2018 / Rev.: 0

Copyright: © 2018 GREINER GmbH

All copyrights to this mounting and operating manual remain with GREINER GmbH. Reprinting - even in extracts ­is not permitted. The transfer of this manual to third parties requires the written permission of GREINER GmbH.
Any use or modification outside the narrow limits of copyright law is not permitted without the consent of
GREINER GmbH. This applies in particular to duplication, translation, microfilming and storage as well as processing
in electronic systems.

Table of contents

© 2018 GREINER GmbH

- Mounting and operating manual

3 / 16

081_instruction

-manual_EN0815502_rev_0.docx

Table of contents

1 General 4

1.1 Scope of delivery 4

2 Mounting 5

2.1 Mounting the guide rails (option) 5

2.2 Mounting the armrests (option) 7

2.3 Installing the seat in the vehicle 8

2.3.1 Electrical connection (option) 8

3 Structure 9
4 Operation 10

4.1 Seat length adjustment (option) 10

4.2 Backrest inclination adjustment 10

4.3 Headrest adjustment 11

4.4 Folding the backrest (option) 12

4.5 Seat depth adjustment 12

4.6 4-way lumbar support (option) 13

4.7 Side bolster adjustment in backrest 13

4.8 Heating in seat and back (option) 14

4.9 E-package for Vario and Vario XXL 14

4.10 Armrest adjustment (option) 15

4.11 LR Edition 15

1 General

4 / 16

- Mounting and operating manual

© 2018 GREINER GmbH

081_instruction

-manual_EN0815502_rev_0.docx

1 General

This mounting and operating manual (hereinafter also referred to as the "manual") also describe functions or fea­tures that may not be included in your retrofit seat (hereinafter also referred to as the "seat").

We reserve the right to make technical changes without notice within the scope of further development of the
seat described in this manual.

The original of this manual was written in German. All other languages are translations of this manual.

Validity

This manual applies only to the seat and accessories supplied by GREINER GmbH (also abbreviated to GREINER).

Manufacturer

GREINER GmbH
Wettestraße 1
74385 Pleidelsheim / Germany
Phone: [phone]
Fax: [phone]
[e-mail]
www.greiner-gmbh.de

Note on pictorial representations

The photos / illustrations are general illustrations and may differ from the actual conditions or from the compo­nents actually used.

Warranty and liability

Our General Terms and Conditions (GTC) apply in the currently valid version at www.greiner-gmbh.de.
In the event of a complaint (damage, defects or other reasons for complaint), your specialist distributor is the

appropriate contact person.

Disposal

During the construction of the seat, care was taken to ensure that, wherever possible, no composites were used.
This design concept allows a high degree of recycling once the seat has reached the end of its service life.
In the event of scrapping, dispose of metal and plastic parts separately and properly.

If you have any queries, please contact your local municipality, local waste disposal company or our service.
Country-specific disposal regulations must be observed!

1.1 Scope of delivery

Standard

 Individually packed seats (reclining position)
 Headrest removed and enclosed
 Set of screws for fastening

6x cylindrical screw with flat head
(DIN 7984 M8 x 25 mm galv. strength class 8.8 polyamide coated)
6x internal toothed washer
(DIN 6797 I M8 galv.)

 This mounting and operating manual

Option

 Guide rail set (left and right running rail with release lever)
 Vehicle-specific adapter or console
 Armrest(s) with 2x fastening screws

(DIN 7991 M10 x 30 mm strength class 8.8 black polyamide coated version)

2 Mounting

© 2018 GREINER GmbH

- Mounting and operating manual

5 / 16

081_instruction

-manual_EN0815502_rev_0.docx

2 Mounting

1. Raise up the backrest (see 4.2 Backrest inclination adjustment) (without Fig.).

2. Insert headrest correctly (see 4.3 Headrest adjustment) (without Fig.).

2.1 Mounting the guide rails (option)

The mounting of the optional guide rail set of the company GREINER GmbH is described here.

1. Move the two guide rails to the mounting position as shown.

If necessary, after loosening the locking mechanism (screwdriver), move the guide rails until the
two rear mounting points (A) are accessible.

A. Rear mounting points

Fig. 1 Mounting the guide rails (option) - move the guide rails into mounting position

2. Move the seat to the mounting position (seat in reclining position - seat and backrest upholstery

downwards - use a clean underlay, if necessary).

3. Align the two guide rails (B) as shown (do not mix up right and left or top and bottom).

4. First screw in the two rear fastening screws (C) together with the toothed washers (D) (only apply

the screw head - do not tighten).

B. Guide rail
C. Fastening screw
D. Toothed washer

Fig. 2 Mounting the guide rails (option) - screw in rear fastening screws (do not tighten)

5. After loosening the locking mechanism (screwdriver), the guide rails must be moved until the front

mounting points (E) are accessible.

6. Now screw in the corresponding front fastening screw (F) together with the toothed washer (G)

and tighten to 25 Nm.

E. Front mounting points
F. Fastening screw
G. Toothed washer

Fig. 3 Mounting the guide rails (option) - screw in and tighten the front fastening screws

A

C

D

B

E

G

F