Greenworks ED60L00, ED60L210 User Manual
EN OPERATOR MANUALEDGER
ES MANUAL DEL OPERADORBORDEADORA
ED60L00 / ED60L210
English
EN
1 Description.................................... 2
1.1 Purpose...................................................... 2
1.2 Overview.................................................... 2
2 IMPORTANT SAFETY
INSTRUCTIONS........................... 2
3 Symbols on the machine............... 3
4 Risk levels..................................... 3
5 Service.......................................... 4
6 Environmentally safe battery
disposal......................................... 4
7 Installation..................................... 4
7.1 Unpack the machine...................................4
7.2 Attach the auxiliary handle......................... 4
7.3 Install the battery pack............................... 5
7.4 Remove the battery pack........................... 5
8 Operation.......................................5
8.1 Controls...................................................... 5
8.2 Start the machine....................................... 5
8.3 Stop the machine....................................... 5
8.4 Adjust the depth of cut................................5
8.5 Replace the blade...................................... 6
8.6 Operation tips............................................. 6
9 Maintenance..................................7
9.1 General information....................................7
9.2 Clean the machine..................................... 7
9.3 Replace the skid plate................................ 7
9.4 Replace the wheel......................................7
10 Transportation and storage........... 8
10.1 Move the machine...................................... 8
10.2 Store the machine...................................... 8
11 Troubleshooting.............................8
12 Technical data............................... 8
13 Limited warranty............................ 9
14 Exploded view............................. 10
1
5
EN
English
1 DESCRIPTION
1.1 PURPOSE
This edger is used to trim and cut around the edge of
driveways, side walks and more. The edger is not
meant to be used to cut hedges, shrubs, bushes, or
flowers.
1.2 OVERVIEW
3
4
Rear handle
1
Auxiliary handle
2
Shaft
3
Guard
4
Depth adjustment knob
5
Wheel
6
Trigger
7
Lock-out button
8
Wrench
9
1
2
6
8
7
9
2 IMPORTANT SAFETY
INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING (THIS
POWER TOOL)
WARNING
Read and understand all instructions before using this
product. Failure to follow all instructions listed below
may result in electric shock, fire, and/or serious
personal injury.
• Use only identical manufacturer’s replacement parts
and accessories. Use of any other parts may create
a hazard or cause product damage.
• Always wear safety glasses with side shields
marked to comply with ANSI Z87.1. Everyday
glasses have only impact resistant lenses. They are
NOT safety glasses. Following this rule will reduce
the risk of eye injury. Use face mask if operating in
dusty work spaces.
• Avoid Dangerous Environment – Don’t expose
power tools to damp or wet conditions. Water
entering a power tool will increase the risk of electric
shock.
• Don’t use in rain.
• Keep all bystanders, children, and pets at least 50 ft.
away.
• Dress Properly – Do not wear loose clothing or
jewelry. They can be caught in moving parts. Use of
rubber gloves and substantial footwear is
recommended when working outdoors. Wear
protective hair covering to contain long hair.
• Use right Appliance. Do not use appliance for any
job except that for which it is intended.
• Avoid Unintentional Starting – Don’t carry appliance
with finger on switch. Be sure switch is off when
battery plugging in.
• Don’t Force Appliance – It will do the job better and
with less likelihood of a risk of injury at the rate for
which it was designed.
• Don’t overreach – Keep proper footing and balance
at all times.
• Stay alert – Watch what you are doing. Use
common sense. Do not operate this unit when you
are tired, ill or under the influence of alcohol, drugs
or medication.
• Always store idle power tools indoors – When not in
use, power tools should be stored indoors in a dry
and high or locked-up place, out of reach of
children.
• Maintain Appliance With Care – Replace string head
if cracked, chipped, or damaged in any way. Be sure
the string head is properly installed and securely
fastened. Keep cutting edge sharp and clean for
best performance and to reduce the risk of injury.
Follow instructions for lubricating and changing
accessories. Inspect appliance cord periodically,
and if damaged, have it repaired by an authorized
service facility. Inspect extension cords periodically
and replace if damaged. Keep handles dry, clean,
and free from oil and grease. Failure to do so can
cause serious injury.
• Check damaged parts before using the appliance, a
guard or other part that is damaged should be
carefully checked to determine that it will operate
properly and perform its intended function. Check
for alignment of moving parts, binding of moving
parts, breakage of parts, damaged mountings, and
any other condition that may affect its operation. A
guard or other part that is damaged should be
properly repaired or replaced by an authorized
service center unless indicated elsewhere in this
manual.
2
Loading...